Date: Thu, 21 Feb 2013 15:22:44 +0100 From: Bernt Hansson <bah@bananmonarki.se> To: "Ronald F. Guilmette" <rfg@tristatelogic.com> Cc: freebsd-questions@freebsd.org Subject: Re: cdrecord: Please report. Message-ID: <51262DB4.9070303@bananmonarki.se> In-Reply-To: <12037.1361404359@server1.tristatelogic.com> References: <12037.1361404359@server1.tristatelogic.com>
next in thread | previous in thread | raw e-mail | index | archive | help
2013-02-21 00:52, Ronald F. Guilmette skrev: > > > I am not a happy camper. > > Now that I've ``upgraded'' from 8.3-RELEASE to 9.1-RELEASE it appears that > good old burncd no longer works, apparently because the CD/DVD drive is > now exclusively handled as an ATAPICAM device. > > So I try to use cdrecord and I get this: > > # cdrecord dev=0,0,0 driveropts=burnfree FreeBSD-9.1-RELEASE-i386-disc1.iso > cdrecord: No write mode specified. > cdrecord: Assuming -sao mode. > cdrecord: If your drive does not accept -sao, try -tao. > cdrecord: Future versions of cdrecord may have different drive dependent defaults. > Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd9.1) Copyright (C) 1995-2010 J�rg Schilling > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Using libscg version 'schily-0.9'. > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : '_NEC ' > Identifikation : 'DVD_RW ND-3550A ' > Revision : '1.05' > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC-3 SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R > cdrecord: Warning: Cannot read drive buffer. > cdrecord: Warning: The DMA speed test has been skipped. > Starting to write CD/DVD/BD at speed 48 in real SAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > cdrecord: WARNING: Drive returns wrong startsec (0) using -150 > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > CDB: 2A 00 00 00 02 80 00 00 20 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 > Sense flags: Blk 0 (not valid) > resid: 65536 > cmd finished after 4.257s timeout 200s > write track data: error after 1310720 bytes > cdrecord: The current problem looks like a buffer underrun. > cdrecord: It looks like 'driveropts=burnfree' does not work for this drive. > cdrecord: Please report. > cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up. > > > So, um, WTF? To whom am supposed to "report" this failure? > > And more to the point, how can I burn a simple damn CD now? > Try http://fy.chalmers.se/~appro/linux/DVD+RW/ its in ports as sysutils/dvd+rw-tools
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51262DB4.9070303>