Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 07 Oct 2009 20:02:21 +0500
From:      rihad <rihad@mail.ru>
To:        Ingo Flaschberger <if@xip.at>
Cc:        freebsd-net@freebsd.org
Subject:   Re: dummynet dropping too many packets
Message-ID:  <4ACCAD7D.9080207@mail.ru>
In-Reply-To: <alpine.LFD.2.00.0910071648200.11223@filebunker.xip.at>
References:  <4AC9E29B.6080908@mail.ru> <20091005123230.GA64167@onelab2.iet.unipi.it> <4AC9EFDF.4080302@mail.ru> <4ACA2CC6.70201@elischer.org> <4ACAFF2A.1000206@mail.ru> <4ACB0C22.4000008@mail.ru> <20091006100726.GA26426@svzserv.kemerovo.su> <4ACB42D2.2070909@mail.ru> <20091006142152.GA42350@svzserv.kemerovo.su> <4ACB6223.1000709@mail.ru> <20091006161240.GA49940@svzserv.kemerovo.su> <alpine.BSF.2.00.0910061804340.50283@fledge.watson.org> <4ACC5563.602@mail.ru> <4ACC56A6.1030808@mail.ru> <alpine.BSF.2.00.0910070957430.58146@fledge.watson.org> <4ACC5DEC.1010006@mail.ru> <alpine.BSF.2.00.0910071036280.58146@fledge.watson.org> <4ACC65A0.7030900@mail.ru> <alpine.BSF.2.00.0910071312420.58146@fledge.watson.org> <4ACC8CC8.8050403@mail.ru> <alpine.BSF.2.00.0910071420290.38033@fledge.watson.org> <4ACCA92A.9070803@mail.ru> <alpine.LFD.2.00.0910071648200.11223@filebunker.xip.at>

next in thread | previous in thread | raw e-mail | index | archive | help
Ingo Flaschberger wrote:
> Hi,
> 
> can you send me the dmesg ouput from your networkcards when they are 
> detected at booting?
> 
Hello,

bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci7
bce0: Ethernet address: 00:1d:09:xx:xx:xx
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W 
(0x03050C05); Flags( MFW MSI )
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
bce1: Ethernet address: 00:1d:09:xx:xx:xx
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W 
(0x03050C05); Flags( MFW MSI )


> can you also send me a lspci and lspci -v ?
> 
Sorry, this is FreeBSD, not Linux ;-)

# pciconf -l
...
bce0@pci0:7:0:0:        class=0x020000 card=0x01b21028 chip=0x164c14e4 
rev=0x12 hdr=0x00
bce1@pci0:3:0:0:        class=0x020000 card=0x01b21028 chip=0x164c14e4 
rev=0x12 hdr=0x00




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4ACCAD7D.9080207>