Date: Thu, 26 Aug 1999 14:59:55 -0400 (EDT) From: "John W. DeBoskey" <jwd@unx.sas.com> To: freebsd-current@freebsd.org Subject: -current kernel problems (spec_getpages & vm_fault) Message-ID: <199908261859.OAA46012@bb01f39.unx.sas.com>
next in thread | raw e-mail | index | archive | help
Hi,
Following up my own mail on sig 11 problems, I beleive the
problem is kernel related. Running a kernel with sources current
as of 11:30am EST, I get the following during a make world:
spec_getpages: I/O read failure: (error code=0) bp 0xc3700ec8 vp 0xc92ce000
size: 0, resid: 0, a_count: 12288, valid: 0x0
nread: 0, reqpage: 0, pindex: 14, pcount: 3
vm_fault: pager read error, pid 37394 (install)
Aug 26 14:08:44 FreeBSD /kernel: pid 37394 (install), uid 0: exited on signal 11
(core dumped)
which is generated by this portion of the make world:
install -c -s -o root -g wheel -m 555 nvi /usr/obj/usr/src/tmp/usr/bin
*** Signal 11
If I reboot with a kernel built on Aug 16, I can run a complete
make world with no failures. I realize alot of changes have gone
into the system over the last few days. If someone can give me some
pointers on getting the information required to debug the problem, I'll
be more than happy to dig into it.
Thanks,
John
--
dmesg output for the machine in question:
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Thu Aug 26 13:47:34 EDT 1999
toor@FreeBSD.unx.sas.com:/usr/src/sys/compile/FreeBSD
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 398775825 Hz
CPU: Pentium II/Xeon/Celeron (398.78-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 126881792 (123908K bytes)
Preloaded elf kernel "kernel" at 0xc0306000.
Pentium Pro MTRR support enabled
ccd0-3: Concatenated disk drivers
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <ATI model 4742 graphics accelerator> irq 3 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 7.1 on pci0
chip1: <UHCI USB controller> irq 11 at device 7.2 on pci0
chip2: <Intel 82371AB Power management controller> at device 7.3 on pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 10 at device 13.0 on pci0
fxp0: Ethernet address 00:a0:c9:2d:14:1b
ahc0: <Adaptec 2940 Ultra SCSI adapter> irq 9 at device 14.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
pcib2: <PCI to PCI bridge (vendor=1011 device=0024)> at device 15.0 on pci0
pci2: <PCI bus> on pcib2
vga-pci1: <Matrox MGA 2164W graphics accelerator> irq 3 at device 9.0 on pci2
ahc1: <Adaptec 2940/DUAL Ultra SCSI adapter> irq 11 at device 10.0 on pci2
ahc1: aic7895 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc2: <Adaptec 2940/DUAL Ultra SCSI adapter> irq 10 at device 10.1 on pci2
ahc2: aic7895 Single Channel B, SCSI Id=7, 16/255 SCBs
ti0: <3Com 3c985-SX Gigabit Ethernet> irq 3 at device 11.0 on pci2
ti0: Ethernet address: 00:60:08:f5:c6:e5
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa0
wdc0: unit 0 (wd0): <Maxtor 90645D3>, DMA, 32-bit, multi-block-16
wd0: 6149MB (12594960 sectors), 12495 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at port 0x170-0x177 irq 15 on isa0
wdc1: unit 0 (atapi): <NEC CD-ROM DRIVE:28C/3.02>, removable, dma, iordy
wdc1: ATAPI CD-ROMs not configured
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
Waiting 5 seconds for SCSI devices to settle
changing root device to wd0s1a
da5 at ahc2 bus 0 target 3 lun 0
da5: <iomega jaz 2GB E.16> Removable Direct Access SCSI-2 device
da5: 20.000MB/s transfers (20.000MHz, offset 15)
da5: 1911MB (3915600 512 byte sectors: 255H 63S/T 243C)
da2 at ahc0 bus 0 target 3 lun 0
da2: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
da3 at ahc0 bus 0 target 4 lun 0
da3: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device
da3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da3: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
da0 at ahc0 bus 0 target 1 lun 0
da0: <SEAGATE ST34572W 0784> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <SEAGATE ST34572W 0784> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
da4 at ahc0 bus 0 target 5 lun 0
da4: <SEAGATE ST32550N 0019> Fixed Direct Access SCSI-2 device
da4: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da4: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C)
cd0 at ahc2 bus 0 target 6 lun 0
cd0: <YAMAHA CRW4260 1.0g> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
spec_getpages: I/O read failure: (error code=0) bp 0xc3700ec8 vp 0xc92ce000
size: 0, resid: 0, a_count: 12288, valid: 0x0
nread: 0, reqpage: 0, pindex: 14, pcount: 3
vm_fault: pager read error, pid 37394 (install)
pid 37394 (install), uid 0: exited on signal 11 (core dumped)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199908261859.OAA46012>