Date: Wed, 15 Dec 1999 03:09:10 -0600 (CST) From: "Jeremy L. Stock" <jstock@winterzone.com> To: current@FreeBSD.ORG Subject: Problem with sbc driver and/or newpcm Message-ID: <Pine.BSF.4.21.9912150256160.286-100000@nic-31-c23-178.mn.mediaone.net>
next in thread | raw e-mail | index | archive | help
The sbc driver seems to correctly detect my soundcard for the first time
since the introduction of newpcm but I don't actually get sound out of it.
I think the IRQ it's detecting might be wrong. Both Windows 98 and the old
pcm driver always used IRQ 10.
Unfortunately my BIOS is too brain-damaged to report IRQ's for ISA devices
at boot so I can't be sure. I have tried options PNPBIOS as well as trying
to specify irq 10 to sbc to no avail. I'd appreciate any assistance.
Here's output from dsmesg and pnpinfo:
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-19991214-CURRENT #0: Wed Dec 15 02:44:58 CST 1999
root@nic-31-c23-178.mn.mediaone.net:/usr/src/sys/compile/NIC
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 350796172 Hz
CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134217728 (131072K bytes)
avail memory = 127004672 (124028K bytes)
Preloaded elf kernel "kernel" at 0xc02ac000.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 9 at device 9.0 on pci0
xl0: Ethernet address: 00:50:da:24:3a:c5
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2910/15/20/30C SCSI adapter> irq 9 at device 10.0 on pci0
ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs
vga-pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> irq 11 at device 11.0 on pci0
ata-pci0: <AcerLabs Aladdin ATA controller> irq 0 at device 15.0 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata-isa0: already registered as ata0
ata-isa1: already registered as ata1
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,3 on isa0
pcm0: <SB DSP 4.16> on sbc0
unknown0: <Game> at port 0x201 on isa0
ad0: <WDC AC28400R/17.01J57> ATA-4 disk at ata0 as master
ad0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad1: <WDC AC36400L/09.09M08> ATA-4 disk at ata0 as slave
ad1: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
acd0: <CD-ROM CDU4011/UY04> CDROM drive at ata1 as master
acd0: read 6890KB/s (6890KB/s), 120KB buffer, PIO
acd0: supported read types: CD-R, CD-RW, CD-DA, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad1s1a
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <SCSI-CD ReWritable-2x2x6 2.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID CTL00f0 (0xf0008c0e), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 16
Device Description: Creative ViBRA16X PnP
Logical Device ID: CTL0043 0x43008c0e #0
Device Description: Audio
TAG Start DF
Good Configuration
IRQ: 5 - only one type (true/edge)
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10
[16-bit addr]
I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 5 7 9 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 5 7 9 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 5 7 9 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 9 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x394, alignment 0x4, len 0x4
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 9 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
TAG End DF
Logical Device ID: CTL7005 0x05708c0e #1
Compatible Device ID: PNPb02f (2fb0d041)
Device Description: Game
TAG Start DF
Good Configuration
I/O Range 0x201 .. 0x201, alignment 0x1, len 0x1
[16-bit addr]
TAG Start DF
Acceptable Configuration
I/O Range 0x200 .. 0x20f, alignment 0x1, len 0x1
[16-bit addr]
TAG End DF
End Tag
Successfully got 48 resources, 2 logical fdevs
-- card select # 0x0001
CSN CTL00f0 (0xf0008c0e), Serial Number 0xffffffff
Logical device #0
IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220
IRQ 5 0
DMA 1 3
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
--
Jeremy L. Stock <jstock@winterzone.com>
ICQ 46329337 <jstock@visi.com>
Fax # 612-629-6540
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.9912150256160.286-100000>