Date: Tue, 23 Oct 2007 09:03:39 GMT From: Victor Boglea <rokernel@yahoo.com> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/117418: FreeBSD 6.2 crash on amd64 4400+ Message-ID: <200710230903.l9N93dd9034642@www.freebsd.org> Resent-Message-ID: <200710230910.l9N9A1TA053122@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 117418 >Category: amd64 >Synopsis: FreeBSD 6.2 crash on amd64 4400+ >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Oct 23 09:10:01 UTC 2007 >Closed-Date: >Last-Modified: >Originator: Victor Boglea >Release: 6.2 >Organization: >Environment: FreeBSD 6.2-RELEASE-p8 #0: Tue Oct 23 03:16:25 EEST 2007 root@marasti-1f.east.utcluj.ro:/usr/src/sys/amd64/compile/SMP >Description: Hello, I have 2 servers with amd64 4400+ procesor with diferent mainboards.. everything works fine until i connect remotely to ssh then after a few commands the system crash i can`t fine anything in the logs. A paste of dmesg is show down. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p8 #0: Tue Oct 23 03:16:25 EEST 2007 root@marasti-1f.east.utcluj.ro:/usr/src/sys/amd64/compile/SMP ACPI APIC Table: <GBT NVDAACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2310.53-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x11f<LAHF,CMP,<b2>,<b3>,CR8,<b8>> Cores per package: 2 real memory = 2080309248 (1983 MB) avail memory = 1998008320 (1905 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <GBT NVDAACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR ACPI-0501: *** Error: Handler for [SystemMemory] returned AE_AML_ALIGNMENT ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000b36d80), AE_AML_ALIGNMENT ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000b36d80), AE_AML_ALIGNMENT can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <serial bus, USB> at device 2.0 (no driver attached) pci0: <serial bus, USB> at device 2.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xf4004000-0xf40040ff irq 16 at device 6.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 4c:00:10:74:b9:27 rl1: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xf4006000-0xf40060ff irq 17 at device 7.0 on pci1 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: Ethernet address: 4c:00:10:3a:b1:77 pci1: <serial bus, FireWire> at device 14.0 (no driver attached) pci0: <multimedia> at device 5.0 (no driver attached) atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <bridge> at device 7.0 (no driver attached) atapci1: <GENERIC ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd000-0xd00f mem 0xf7008000-0xf7008fff irq 21 at device 8.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <GENERIC ATA controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xe400-0xe40f mem 0xf7004000-0xf7004fff irq 22 at device 8.1 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pci0: <display, VGA> at device 13.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: DVDROM <ASUS DVD-E818A/1.00> at ata0-master UDMA33 ad1: 76318MB <WDC WD800BB-22JHC0 05.01C05> at ata0-slave UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad1s1a WARNING: / was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted rl0: link state changed to UP rl1: link state changed to UP >How-To-Repeat: To repeat the problem you must install freebsd with minimal configuration from cd/dvd or from www/ftp. After that i have pkg_add -r cvsup-without-gui rehash cd /usr/share/examples/cvsup cp ports-supfile /usr/local/etc cp standard-supfile /usr/local/etc cd /usr/local/etc ee ports-supfile ee standard-supfile cd cvsup -g -L 2 /usr/local/etc/ports-supfile ; cvsup -g -L 2 /usr/local/etc/standard-supfile like the page: http://test.davidpierron.com/fbsd-pf.php And in ports-supfile i have put www1.ro.freebsd.org After all instructions the new kernel is FreeBSD 6.2-RELEASE-p8 Now if i ssh to the server after some commands like "ls, ps ax" the server crash and it`s need reboot if i don`t make ssh to the server and make ssh from the lan everything works fine it only crash when i make ssh to the external network card with a real ip. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200710230903.l9N93dd9034642>