Date: Sun, 25 Apr 2010 17:23:03 -0500 From: Nathan Whitehorn <nwhitehorn@freebsd.org> To: Super Biscuit <super_bisquit@yahoo.com> Cc: freebsd-ppc@freebsd.org Subject: Re: Update:Xorg build and performance. Message-ID: <4BD4C0C7.7020308@freebsd.org> In-Reply-To: <204358.15163.qm@web110114.mail.gq1.yahoo.com> References: <204358.15163.qm@web110114.mail.gq1.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 04/25/10 16:40, Super Biscuit wrote: > > > --- On *Sun, 4/25/10, Nathan Whitehorn /<nwhitehorn@freebsd.org>/* wrote: > > > From: Nathan Whitehorn <nwhitehorn@freebsd.org> > Subject: Re: Update:Xorg build and performance. > To: "Super Biscuit" <super_bisquit@yahoo.com> > Date: Sunday, April 25, 2010, 9:21 PM > > On 04/25/10 16:06, Super Biscuit wrote: >> >> >> --- On *Sun, 4/25/10, Nathan Whitehorn >> /<nwhitehorn@freebsd.org>/* wrote: >> >> >> From: Nathan Whitehorn <nwhitehorn@freebsd.org> >> Subject: Re: Update:Xorg build and performance. >> To: "Super Biscuit" <super_bisquit@yahoo.com> >> Date: Sunday, April 25, 2010, 8:38 PM >> >> On 04/25/10 15:16, Super Biscuit wrote: >>> >>> >>> --- On *Sun, 4/25/10, Nathan Whitehorn >>> /<nwhitehorn@freebsd.org>/* wrote: >>> >>> >>> From: Nathan Whitehorn <nwhitehorn@freebsd.org> >>> Subject: Re: Update:Xorg build and performance. >>> To: "Super Biscuit" <super_bisquit@yahoo.com> >>> Date: Sunday, April 25, 2010, 6:53 PM >>> >>> Super Biscuit wrote: >>> > >>> > >>> > --- On *Sun, 4/25/10, Nathan Whitehorn >>> /<nwhitehorn@freebsd.org>/* wrote: >>> > >>> > >>> > From: Nathan Whitehorn <nwhitehorn@freebsd.org> >>> > Subject: Re: Update:Xorg build and performance. >>> > To: "Super Biscuit" <super_bisquit@yahoo.com> >>> > Cc: "Garrett Cooper" <yanefbsd@gmail.com>, >>> freebsd-ppc@freebsd.org >>> > Date: Sunday, April 25, 2010, 3:09 PM >>> > >>> > Super Biscuit wrote: >>> > > --- On Sat, 4/24/10, Garrett Cooper <yanefbsd@gmail.com >>> > </mc/compose?to=yanefbsd@gmail.com>> wrote: >>> > > >>> > > From: Garrett Cooper <yanefbsd@gmail.com >>> > </mc/compose?to=yanefbsd@gmail.com>> >>> > > Subject: Re: Update:Xorg build and performance. >>> > > To: "Super Biscuit" <super_bisquit@yahoo.com >>> > </mc/compose?to=super_bisquit@yahoo.com>> >>> > > Date: Saturday, April 24, 2010, 10:12 AM >>> > > >>> > > On Sat, Apr 24, 2010 at 2:57 AM, Super Biscuit >>> > <super_bisquit@yahoo.com >>> </mc/compose?to=super_bisquit@yahoo.com>> >>> > wrote: >>> > > >> --- On Fri, 4/23/10, Olivier Gautherot >>> <olivier@gautherot.net >>> > </mc/compose?to=olivier@gautherot.net>> wrote: >>> > >> >>> > >> From: Olivier Gautherot <olivier@gautherot.net >>> > </mc/compose?to=olivier@gautherot.net>> >>> > >> Subject: Re: Update:Xorg build and performance. >>> > >> To: "Super Biscuit" <super_bisquit@yahoo.com >>> > </mc/compose?to=super_bisquit@yahoo.com>> >>> > >> Cc: "Nathan Whitehorn" <nwhitehorn@freebsd.org >>> > </mc/compose?to=nwhitehorn@freebsd.org>>, >>> freebsd-ppc@freebsd.org >>> > </mc/compose?to=freebsd-ppc@freebsd.org> >>> > >> Date: Friday, April 23, 2010, 8:06 PM >>> > >> >>> > >> Hi, >>> > >> >>> > >> On Fri, Apr 23, 2010 at 3:55 PM, Super Biscuit >>> > <super_bisquit@yahoo.com >>> </mc/compose?to=super_bisquit@yahoo.com>> >>> > wrote: >>> > >> >>> > >> >>> > >> Xorg still does not start. >>> > >> >>> > >> No screens found >>> > >> >>> > >> I added then removed the fbdev. >>> > >> >>> > >> Will I need to compile Xorg without fbdev? >>> > >> >>> > >> The file xorg.conf is non existent on my system >>> > >> >>> > >> If you need more information, tell me. >>> > >> >>> > >> For some reason, Xorg is lacking a device or >>> something - >>> > basically, it does not find a refresh mode >>> compatible with your >>> > graphics card and your screen. Could you post your >>> xorg.log somewhere? >>> > >> >>> > >> >>> > >> >>> > >> Cheers >>> > >> -- >>> > >> Olivier Gautherot >>> > >> olivier@gautherot.net >>> </mc/compose?to=olivier@gautherot.net> >>> > >> >>> > >> >>> > >> I'll post right after I get pastebin installed. >>> > >> Thanks for replying. >>> > >> > >>> > > http://pastebin.com/ (no installation required)? >>> > > -Garrett >>> > > >>> > > >>> > > I had to reinstall 9.0 SNAPHOT. >>> > > Here i the pastebin url. >>> > > >>> > > http://slexy.org/view/s20QpUxwW3 >>> > > >>> > > The author name is moleque. I also did not install the >>> > framebuffer, vesa, or dummy drivers this time. >>> > > >>> > > Thanks for replying. >>> > > What modules did you install? It looks like >>> you may not have >>> > installed >>> > any. You need at least a driver for your graphics card >>> > (xf86-video-r128) >>> > and the keyboard and mouse drivers. >>> > -Nathan >>> > >>> > >>> > I've installed, deinstalled, and reinstalled the >>> r128 driver. >>> > Mouse works because I can see the pointer in the >>> console. Keyboard >>> > works. >>> > >>> > Here is my xorg.conf >>> > http://slexy.org/view/s2RSRtoWae submitted as moleque. >>> > >>> > Is the fbdev required for the G series? >>> > >>> > >>> FBdev is something that exists only on Linux, and is >>> both unnecessary and cannot be used on FreeBSD. >>> >>> You do need to install the X11 keyboard and mouse >>> drivers to interface with the FreeBSD console drivers, >>> and you should check that the sysctl hw.ofwfb.relax_mmap >>> is 1. Your xorg.conf looks basically identical to mine. >>> Did you change anything since the last X server log you >>> sent out? >>> -Nathan >>> >>> I tried using ati as the driver then switched it back to >>> r128. I reinstalled r128. Pkg_info |grep xf86 lists the >>> keyboard and mouse drivers as already installed. >>> When I type dmesg|grep pci it lists the address for the >>> card as a vgapci. >>> Which log message or system file do you need me to send? >>> >>> >> Xorg.0.log with logverbose set to 9. >> -Nathan >> >> I did startx -- -logverbose 9 -logfile /var/log/Xorg.0.log >> >> And sent the results to http://slexy.org/view/s2IF73TSxW >> >> Thanks for helping me through this. >> >> > Add "AllowEmptyInput" "Off" in your "ServerLayout" section? > -Nathan > > Okay, I fixed the log error. My apologies about that. What > remains is "no screens found.' > I also restarted dbus and hal. > > Is it actually loading the r128 module? The last log you sent didn't have it. You may also get better luck asking on freebsd-x11@ -Nathan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BD4C0C7.7020308>