Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 2 Oct 2019 09:48:01 +0000 (UTC)
From:      Hans Petter Selasky <hselasky@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r352975 - head/sys/dev/mlx5/mlx5_core
Message-ID:  <201910020948.x929m1ld017058@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: hselasky
Date: Wed Oct  2 09:48:01 2019
New Revision: 352975
URL: https://svnweb.freebsd.org/changeset/base/352975

Log:
  Unify prints in mlx5core.
  
  All prints in mlx5core should use on of the macros:
  mlx5_core_err/dbg/warn
  
  Submitted by:	slavash@
  MFC after:	3 days
  Sponsored by:	Mellanox Technologies

Modified:
  head/sys/dev/mlx5/mlx5_core/mlx5_cmd.c
  head/sys/dev/mlx5/mlx5_core/mlx5_core.h
  head/sys/dev/mlx5/mlx5_core/mlx5_eq.c
  head/sys/dev/mlx5/mlx5_core/mlx5_fs_tree.c
  head/sys/dev/mlx5/mlx5_core/mlx5_fw.c
  head/sys/dev/mlx5/mlx5_core/mlx5_fwdump.c
  head/sys/dev/mlx5/mlx5_core/mlx5_health.c
  head/sys/dev/mlx5/mlx5_core/mlx5_main.c
  head/sys/dev/mlx5/mlx5_core/mlx5_mpfs.c
  head/sys/dev/mlx5/mlx5_core/mlx5_port.c

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_cmd.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_cmd.c	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_cmd.c	Wed Oct  2 09:48:01 2019	(r352975)
@@ -1489,7 +1489,9 @@ int mlx5_cmd_init(struct mlx5_core_dev *dev)
 	memset(cmd, 0, sizeof(*cmd));
 	cmd_if_rev = cmdif_rev_get(dev);
 	if (cmd_if_rev != CMD_IF_REV) {
-		device_printf((&dev->pdev->dev)->bsddev, "ERR: ""Driver cmdif rev(%d) differs from firmware's(%d)\n", CMD_IF_REV, cmd_if_rev);
+		mlx5_core_err(dev,
+		    "Driver cmdif rev(%d) differs from firmware's(%d)\n",
+		    CMD_IF_REV, cmd_if_rev);
 		return -EINVAL;
 	}
 
@@ -1501,13 +1503,16 @@ int mlx5_cmd_init(struct mlx5_core_dev *dev)
 	cmd->log_sz = cmd_l >> 4 & 0xf;
 	cmd->log_stride = cmd_l & 0xf;
 	if (1 << cmd->log_sz > MLX5_MAX_COMMANDS) {
-		device_printf((&dev->pdev->dev)->bsddev, "ERR: ""firmware reports too many outstanding commands %d\n", 1 << cmd->log_sz);
+		mlx5_core_err(dev,
+		    "firmware reports too many outstanding commands %d\n",
+		    1 << cmd->log_sz);
 		err = -EINVAL;
 		goto err_free_page;
 	}
 
 	if (cmd->log_sz + cmd->log_stride > MLX5_ADAPTER_PAGE_SHIFT) {
-		device_printf((&dev->pdev->dev)->bsddev, "ERR: ""command queue size overflow\n");
+		mlx5_core_err(dev,
+		    "command queue size overflow\n");
 		err = -EINVAL;
 		goto err_free_page;
 	}
@@ -1518,7 +1523,9 @@ int mlx5_cmd_init(struct mlx5_core_dev *dev)
 
 	cmd->cmdif_rev = ioread32be(&dev->iseg->cmdif_rev_fw_sub) >> 16;
 	if (cmd->cmdif_rev > CMD_IF_REV) {
-		device_printf((&dev->pdev->dev)->bsddev, "ERR: ""driver does not support command interface version. driver %d, firmware %d\n", CMD_IF_REV, cmd->cmdif_rev);
+		mlx5_core_err(dev,
+		    "driver does not support command interface version. driver %d, firmware %d\n",
+		    CMD_IF_REV, cmd->cmdif_rev);
 		err = -ENOTSUPP;
 		goto err_free_page;
 	}
@@ -1534,7 +1541,7 @@ int mlx5_cmd_init(struct mlx5_core_dev *dev)
 	cmd_h = (u32)((u64)(cmd->dma) >> 32);
 	cmd_l = (u32)(cmd->dma);
 	if (cmd_l & 0xfff) {
-		device_printf((&dev->pdev->dev)->bsddev, "ERR: ""invalid command queue address\n");
+		mlx5_core_err(dev, "invalid command queue address\n");
 		err = -ENOMEM;
 		goto err_free_page;
 	}
@@ -1551,7 +1558,7 @@ int mlx5_cmd_init(struct mlx5_core_dev *dev)
 
 	err = create_msg_cache(dev);
 	if (err) {
-		device_printf((&dev->pdev->dev)->bsddev, "ERR: ""failed to create command cache\n");
+		mlx5_core_err(dev, "failed to create command cache\n");
 		goto err_free_page;
 	}
 	return 0;

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_core.h
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_core.h	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_core.h	Wed Oct  2 09:48:01 2019	(r352975)
@@ -53,13 +53,18 @@ do {									\
 		mlx5_core_dbg(dev, format, ##__VA_ARGS__);		\
 } while (0)
 
-#define mlx5_core_err(_dev, format, ...)					\
-	device_printf((&(_dev)->pdev->dev)->bsddev, "ERR: ""%s:%d:(pid %d): " format, \
+#define	mlx5_core_err(_dev, format, ...)					\
+	device_printf((_dev)->pdev->dev.bsddev, "ERR: ""%s:%d:(pid %d): " format, \
 		__func__, __LINE__, curthread->td_proc->p_pid, \
 		##__VA_ARGS__)
 
-#define mlx5_core_warn(_dev, format, ...)				\
-	device_printf((&(_dev)->pdev->dev)->bsddev, "WARN: ""%s:%d:(pid %d): " format, \
+#define	mlx5_core_warn(_dev, format, ...)				\
+	device_printf((_dev)->pdev->dev.bsddev, "WARN: ""%s:%d:(pid %d): " format, \
+		__func__, __LINE__, curthread->td_proc->p_pid, \
+		##__VA_ARGS__)
+
+#define	mlx5_core_info(_dev, format, ...)					\
+	device_printf((_dev)->pdev->dev.bsddev, "INFO: ""%s:%d:(pid %d): " format, \
 		__func__, __LINE__, curthread->td_proc->p_pid, \
 		##__VA_ARGS__)
 

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_eq.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_eq.c	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_eq.c	Wed Oct  2 09:48:01 2019	(r352975)
@@ -673,7 +673,6 @@ static void mlx5_port_module_event(struct mlx5_core_de
 	unsigned int module_status;
 	unsigned int error_type;
 	struct mlx5_eqe_port_module_event *module_event_eqe;
-	struct pci_dev *pdev = dev->pdev;
 
 	module_event_eqe = &eqe->data.port_module_event;
 
@@ -687,19 +686,19 @@ static void mlx5_port_module_event(struct mlx5_core_de
 		dev->priv.pme_stats.status_counters[module_status]++;
 	switch (module_status) {
 	case MLX5_MODULE_STATUS_PLUGGED_ENABLED:
-		device_printf((&pdev->dev)->bsddev,
-		    "INFO: Module %u, status: plugged and enabled\n",
+		mlx5_core_info(dev,
+		    "Module %u, status: plugged and enabled\n",
 		    module_num);
 		break;
 
 	case MLX5_MODULE_STATUS_UNPLUGGED:
-		device_printf((&pdev->dev)->bsddev,
-		    "INFO: Module %u, status: unplugged\n", module_num);
+		mlx5_core_info(dev,
+		    "Module %u, status: unplugged\n", module_num);
 		break;
 
 	case MLX5_MODULE_STATUS_ERROR:
-		device_printf((&pdev->dev)->bsddev,
-		    "ERROR: Module %u, status: error, %s\n",
+		mlx5_core_err(dev,
+		    "Module %u, status: error, %s\n",
 		    module_num,
 		    mlx5_port_module_event_error_type_to_string(error_type));
 		if (error_type < MLX5_MODULE_EVENT_ERROR_NUM)
@@ -707,8 +706,8 @@ static void mlx5_port_module_event(struct mlx5_core_de
 		break;
 
 	default:
-		device_printf((&pdev->dev)->bsddev,
-		    "INFO: Module %u, unknown status\n", module_num);
+		mlx5_core_info(dev,
+		    "Module %u, unknown status\n", module_num);
 	}
 	/* store module status */
 	if (module_num < MLX5_MAX_PORTS)

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_fs_tree.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_fs_tree.c	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_fs_tree.c	Wed Oct  2 09:48:01 2019	(r352975)
@@ -139,7 +139,6 @@ static struct mlx5_flow_root_namespace *find_root(stru
 		node = parent;
 
 	if (node->type != FS_TYPE_NAMESPACE) {
-		printf("mlx5_core: WARN: ""mlx5: flow steering node %s is not in tree or garbaged\n", node->name);
 		return NULL;
 	}
 
@@ -477,7 +476,7 @@ static int connect_prev_fts(struct fs_prio *locked_pri
 		err = fs_set_star_rule(dev, iter, next_ft);
 		if (err) {
 			mlx5_core_warn(dev,
-				       "mlx5: flow steering can't connect prev and next\n");
+			    "mlx5: flow steering can't connect prev and next\n");
 			goto unlock;
 		} else {
 			/* Assume ft's prio is locked */
@@ -605,7 +604,9 @@ static void destroy_star_rule(struct mlx5_flow_table *
 
 	root = find_root(&prio->base);
 	if (!root)
-		printf("mlx5_core: ERR: ""mlx5: flow steering failed to find root of priority %s", prio->base.name);
+		mlx5_core_err(dev,
+		    "flow steering failed to find root of priority %s",
+		    prio->base.name);
 
 	/* In order to ensure atomic deletion, first update
 	 * prev ft to point on the next ft.
@@ -765,11 +766,13 @@ static struct mlx5_flow_table *_create_ft_common(struc
 	int log_table_sz;
 	int ft_size;
 	char gen_name[20];
-	struct mlx5_flow_root_namespace *root =
-		find_root(&ns->base);
+	struct mlx5_flow_root_namespace *root = find_root(&ns->base);
+	struct mlx5_core_dev *dev = fs_get_dev(&ns->base);
 
 	if (!root) {
-		printf("mlx5_core: ERR: ""mlx5: flow steering failed to find root of namespace %s", ns->base.name);
+		mlx5_core_err(dev,
+		    "flow steering failed to find root of namespace %s",
+		    ns->base.name);
 		return ERR_PTR(-ENODEV);
 	}
 
@@ -987,12 +990,16 @@ int mlx5_destroy_flow_table(struct mlx5_flow_table *ft
 	struct fs_prio *prio;
 	struct mlx5_flow_root_namespace *root;
 	bool is_shared_prio;
+	struct mlx5_core_dev *dev;
 
 	fs_get_parent(prio, ft);
 	root = find_root(&prio->base);
+	dev = fs_get_dev(&prio->base);
 
 	if (!root) {
-		printf("mlx5_core: ERR: ""mlx5: flow steering failed to find root of priority %s", prio->base.name);
+		mlx5_core_err(dev,
+		    "flow steering failed to find root of priority %s",
+		    prio->base.name);
 		return -ENODEV;
 	}
 

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_fw.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_fw.c	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_fw.c	Wed Oct  2 09:48:01 2019	(r352975)
@@ -324,7 +324,7 @@ int mlx5_cmd_fast_teardown_hca(struct mlx5_core_dev *d
 	} while (!time_after(jiffies, end));
 
 	if (mlx5_get_nic_state(dev) != MLX5_NIC_IFC_DISABLED) {
-		dev_err(&dev->pdev->dev, "NIC IFC still %d after %ums.\n",
+		mlx5_core_err(dev, "NIC IFC still %d after %ums.\n",
 			mlx5_get_nic_state(dev), delay_ms);
 		return -EIO;
 	}

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_fwdump.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_fwdump.c	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_fwdump.c	Wed Oct  2 09:48:01 2019	(r352975)
@@ -69,7 +69,7 @@ mlx5_fwdump_prep(struct mlx5_core_dev *mdev)
 	error = mlx5_vsc_find_cap(mdev);
 	if (error != 0) {
 		/* Inability to create a firmware dump is not fatal. */
-		device_printf((&mdev->pdev->dev)->bsddev, "WARN: "
+		mlx5_core_warn(mdev,
 		    "mlx5_fwdump_prep failed %d\n", error);
 		return;
 	}
@@ -153,13 +153,13 @@ mlx5_fwdump(struct mlx5_core_dev *mdev)
 	uint32_t i, ri;
 	int error;
 
-	dev_info(&mdev->pdev->dev, "Issuing FW dump\n");
+	mlx5_core_info(mdev, "Issuing FW dump\n");
 	mtx_lock(&mdev->dump_lock);
 	if (mdev->dump_data == NULL)
 		goto failed;
 	if (mdev->dump_valid) {
 		/* only one dump */
-		dev_warn(&mdev->pdev->dev,
+		mlx5_core_warn(mdev,
 		    "Only one FW dump can be captured aborting FW dump\n");
 		goto failed;
 	}

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_health.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_health.c	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_health.c	Wed Oct  2 09:48:01 2019	(r352975)
@@ -78,9 +78,11 @@ static int lock_sem_sw_reset(struct mlx5_core_dev *dev
 	ret = -mlx5_vsc_lock_addr_space(dev, MLX5_SEMAPHORE_SW_RESET);
 	if (ret) {
 		if (ret == -EBUSY)
-			mlx5_core_dbg(dev, "SW reset FW semaphore already locked, another function will handle the reset\n");
+			mlx5_core_dbg(dev,
+			    "SW reset FW semaphore already locked, another function will handle the reset\n");
 		else
-			mlx5_core_warn(dev, "SW reset semaphore lock return %d\n", ret);
+			mlx5_core_warn(dev,
+			    "SW reset semaphore lock return %d\n", ret);
 	}
 
 	/* Unlock GW access */
@@ -216,11 +218,12 @@ static void reset_fw_if_needed(struct mlx5_core_dev *d
 	if (fatal_error == MLX5_SENSOR_PCI_COMM_ERR ||
 	    fatal_error == MLX5_SENSOR_NIC_DISABLED ||
 	    fatal_error == MLX5_SENSOR_NIC_SW_RESET) {
-		mlx5_core_warn(dev, "Not issuing FW reset. Either it's already done or won't help.\n");
+		mlx5_core_warn(dev,
+		    "Not issuing FW reset. Either it's already done or won't help.\n");
 		return;
 	}
 
-	mlx5_core_warn(dev, "Issuing FW Reset\n");
+	mlx5_core_info(dev, "Issuing FW Reset\n");
 	/* Write the NIC interface field to initiate the reset, the command
 	 * interface address also resides here, don't overwrite it.
 	 */
@@ -251,8 +254,8 @@ mlx5_health_allow_reset(struct mlx5_core_dev *dev)
 	 */
 	health->last_reset_req = ticks ? : -1;
 	if (!ret)
-		mlx5_core_warn(dev, "Firmware reset elided due to "
-		    "auto-reset frequency threshold.\n");
+		mlx5_core_warn(dev,
+		    "Firmware reset elided due to auto-reset frequency threshold.\n");
 	return (ret);
 }
 
@@ -313,7 +316,7 @@ void mlx5_enter_error_state(struct mlx5_core_dev *dev,
 	} while (!time_after(jiffies, end));
 
 	if (!sensor_nic_disabled(dev)) {
-		dev_err(&dev->pdev->dev, "NIC IFC still %d after %ums.\n",
+		mlx5_core_err(dev, "NIC IFC still %d after %ums.\n",
 			mlx5_get_nic_state(dev), delay_ms);
 	}
 
@@ -321,7 +324,7 @@ void mlx5_enter_error_state(struct mlx5_core_dev *dev,
 	if (!lock)
 		unlock_sem_sw_reset(dev);
 
-	mlx5_core_err(dev, "system error event triggered\n");
+	mlx5_core_info(dev, "System error event triggered\n");
 
 err_state_done:
 	mlx5_core_event(dev, MLX5_DEV_EVENT_SYS_ERROR, 1);
@@ -342,9 +345,11 @@ static void mlx5_handle_bad_state(struct mlx5_core_dev
 		 *    MLX5_NIC_IFC_DISABLED.
 		 */
 		if (dev->priv.health.fatal_error != MLX5_SENSOR_PCI_COMM_ERR)
-			mlx5_core_warn(dev, "NIC SW reset is already progress\n");
+			mlx5_core_warn(dev,
+			    "NIC SW reset is already progress\n");
 		else
-			mlx5_core_warn(dev, "Communication with FW over the PCI link is down\n");
+			mlx5_core_warn(dev,
+			    "Communication with FW over the PCI link is down\n");
 	} else {
 		mlx5_core_warn(dev, "NIC mode %d\n", nic_mode);
 	}
@@ -372,7 +377,8 @@ static void health_recover(struct work_struct *work)
 	mtx_lock(&Giant);	/* XXX newbus needs this */
 
 	if (sensor_pci_no_comm(dev)) {
-		dev_err(&dev->pdev->dev, "health recovery flow aborted, PCI reads still not working\n");
+		mlx5_core_err(dev,
+		    "health recovery flow aborted, PCI reads still not working\n");
 		recover = false;
 	}
 
@@ -384,13 +390,14 @@ static void health_recover(struct work_struct *work)
 	}
 
 	if (nic_mode != MLX5_NIC_IFC_DISABLED) {
-		dev_err(&dev->pdev->dev, "health recovery flow aborted, unexpected NIC IFC mode %d.\n",
-			nic_mode);
+		mlx5_core_err(dev,
+		    "health recovery flow aborted, unexpected NIC IFC mode %d.\n",
+		    nic_mode);
 		recover = false;
 	}
 
 	if (recover) {
-		dev_err(&dev->pdev->dev, "starting health recovery flow\n");
+		mlx5_core_info(dev, "Starting health recovery flow\n");
 		mlx5_recover_device(dev);
 	}
 
@@ -425,12 +432,13 @@ static void health_care(struct work_struct *work)
 
 	spin_lock_irqsave(&health->wq_lock, flags);
 	if (!test_bit(MLX5_DROP_NEW_RECOVERY_WORK, &health->flags)) {
-		mlx5_core_warn(dev, "Scheduling recovery work with %lums delay\n",
-			       recover_delay);
+		mlx5_core_warn(dev,
+		    "Scheduling recovery work with %lums delay\n",
+		    recover_delay);
 		schedule_delayed_work(&health->recover_work, recover_delay);
 	} else {
-		dev_err(&dev->pdev->dev,
-			"new health works are not permitted at this stage\n");
+		mlx5_core_err(dev,
+		    "new health works are not permitted at this stage\n");
 	}
 	spin_unlock_irqrestore(&health->wq_lock, flags);
 }
@@ -455,7 +463,7 @@ void mlx5_trigger_health_work(struct mlx5_core_dev *de
 	if (!test_bit(MLX5_DROP_NEW_HEALTH_WORK, &health->flags))
 		queue_work(health->wq, &health->work);
 	else
-		dev_err(&dev->pdev->dev,
+		mlx5_core_err(dev,
 			"new health works are not permitted at this stage\n");
 	spin_unlock_irqrestore(&health->wq_lock, flags);
 }
@@ -509,18 +517,23 @@ print_health_info(struct mlx5_core_dev *dev)
 		return (0);
 
 	for (i = 0; i < ARRAY_SIZE(h->assert_var); i++)
-		printf("mlx5_core: INFO: ""assert_var[%d] 0x%08x\n", i, ioread32be(h->assert_var + i));
+		mlx5_core_info(dev, "assert_var[%d] 0x%08x\n", i,
+		    ioread32be(h->assert_var + i));
 
-	printf("mlx5_core: INFO: ""assert_exit_ptr 0x%08x\n", ioread32be(&h->assert_exit_ptr));
-	printf("mlx5_core: INFO: ""assert_callra 0x%08x\n", ioread32be(&h->assert_callra));
-	snprintf(fw_str, sizeof(fw_str), "%d.%d.%d", fw_rev_maj(dev), fw_rev_min(dev), fw_rev_sub(dev));
-	printf("mlx5_core: INFO: ""fw_ver %s\n", fw_str);
-	printf("mlx5_core: INFO: ""hw_id 0x%08x\n", ioread32be(&h->hw_id));
-	printf("mlx5_core: INFO: ""irisc_index %d\n", ioread8(&h->irisc_index));
-	printf("mlx5_core: INFO: ""synd 0x%x: %s\n", synd, hsynd_str(synd));
-	printf("mlx5_core: INFO: ""ext_synd 0x%04x\n", ioread16be(&h->ext_synd));
+	mlx5_core_info(dev, "assert_exit_ptr 0x%08x\n",
+	    ioread32be(&h->assert_exit_ptr));
+	mlx5_core_info(dev, "assert_callra 0x%08x\n",
+	    ioread32be(&h->assert_callra));
+	snprintf(fw_str, sizeof(fw_str), "%d.%d.%d",
+	    fw_rev_maj(dev), fw_rev_min(dev), fw_rev_sub(dev));
+	mlx5_core_info(dev, "fw_ver %s\n", fw_str);
+	mlx5_core_info(dev, "hw_id 0x%08x\n", ioread32be(&h->hw_id));
+	mlx5_core_info(dev, "irisc_index %d\n", ioread8(&h->irisc_index));
+	mlx5_core_info(dev, "synd 0x%x: %s\n",
+	    ioread8(&h->synd), hsynd_str(ioread8(&h->synd)));
+	mlx5_core_info(dev, "ext_synd 0x%04x\n", ioread16be(&h->ext_synd));
 	fw = ioread32be(&h->fw_ver);
-	printf("mlx5_core: INFO: ""raw fw_ver 0x%08x\n", fw);
+	mlx5_core_info(dev, "raw fw_ver 0x%08x\n", fw);
 
 	return synd;
 }
@@ -540,31 +553,38 @@ static void health_watchdog(struct work_struct *work)
 
 	err = mlx5_pci_read_power_status(dev, &power, &status);
 	if (err < 0) {
-		mlx5_core_warn(dev, "Failed reading power status: %d\n", err);
+		mlx5_core_warn(dev, "Failed reading power status: %d\n",
+		    err);
 		return;
 	}
 
 	dev->pwr_value = power;
 
 	if (dev->pwr_status != status) {
-		device_t bsddev = dev->pdev->dev.bsddev;
 
 		switch (status) {
 		case 0:
 			dev->pwr_status = status;
-			device_printf(bsddev, "PCI power is not published by the PCIe slot.\n");
+			mlx5_core_info(dev,
+			    "PCI power is not published by the PCIe slot.\n");
 			break;
 		case 1:
 			dev->pwr_status = status;
-			device_printf(bsddev, "PCIe slot advertised sufficient power (%uW).\n", power);
+			mlx5_core_info(dev,
+			    "PCIe slot advertised sufficient power (%uW).\n",
+			    power);
 			break;
 		case 2:
 			dev->pwr_status = status;
-			device_printf(bsddev, "WARN: Detected insufficient power on the PCIe slot (%uW).\n", power);
+			mlx5_core_warn(dev,
+			    "Detected insufficient power on the PCIe slot (%uW).\n",
+			    power);
 			break;
 		default:
 			dev->pwr_status = 0;
-			device_printf(bsddev, "WARN: Unknown power state detected(%d).\n", status);
+			mlx5_core_warn(dev,
+			    "Unknown power state detected(%d).\n",
+			    status);
 			break;
 		}
 	}
@@ -580,8 +600,8 @@ mlx5_trigger_health_watchdog(struct mlx5_core_dev *dev
 	if (!test_bit(MLX5_DROP_NEW_WATCHDOG_WORK, &health->flags))
 		queue_work(health->wq_watchdog, &health->work_watchdog);
 	else
-		dev_err(&dev->pdev->dev,
-			"scheduling watchdog is not permitted at this stage\n");
+		mlx5_core_err(dev,
+		    "scheduling watchdog is not permitted at this stage\n");
 	spin_unlock_irqrestore(&health->wq_lock, flags);
 }
 
@@ -611,7 +631,8 @@ static void poll_health(unsigned long data)
 	fatal_error = check_fatal_sensors(dev);
 
 	if (fatal_error && !health->fatal_error) {
-		mlx5_core_err(dev, "Fatal error %u detected\n", fatal_error);
+		mlx5_core_err(dev,
+		    "Fatal error %u detected\n", fatal_error);
 		dev->priv.health.fatal_error = fatal_error;
 		print_health_info(dev);
 		mlx5_trigger_health_work(dev);

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_main.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_main.c	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_main.c	Wed Oct  2 09:48:01 2019	(r352975)
@@ -172,24 +172,25 @@ static struct mlx5_profile profiles[] = {
 
 static int set_dma_caps(struct pci_dev *pdev)
 {
+	struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
 	int err;
 
 	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "WARN: ""Warning: couldn't set 64-bit PCI DMA mask\n");
+		mlx5_core_warn(dev, "couldn't set 64-bit PCI DMA mask\n");
 		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
-			device_printf((&pdev->dev)->bsddev, "ERR: ""Can't set PCI DMA mask, aborting\n");
+			mlx5_core_err(dev, "Can't set PCI DMA mask, aborting\n");
 			return err;
 		}
 	}
 
 	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "WARN: ""Warning: couldn't set 64-bit consistent PCI DMA mask\n");
+		mlx5_core_warn(dev, "couldn't set 64-bit consistent PCI DMA mask\n");
 		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
-			device_printf((&pdev->dev)->bsddev, "ERR: ""Can't set consistent PCI DMA mask, aborting\n");
+			mlx5_core_err(dev, "Can't set consistent PCI DMA mask, aborting\n");
 			return err;
 		}
 	}
@@ -243,16 +244,17 @@ static void mlx5_pci_disable_device(struct mlx5_core_d
 
 static int request_bar(struct pci_dev *pdev)
 {
+	struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
 	int err = 0;
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Missing registers BAR, aborting\n");
+		mlx5_core_err(dev, "Missing registers BAR, aborting\n");
 		return -ENODEV;
 	}
 
 	err = pci_request_regions(pdev, DRIVER_NAME);
 	if (err)
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Couldn't get PCI resources, aborting\n");
+		mlx5_core_err(dev, "Couldn't get PCI resources, aborting\n");
 
 	return err;
 }
@@ -319,7 +321,7 @@ enum {
 				MLX5_DEV_CAP_FLAG_DRAIN_SIGERR,
 };
 
-static u16 to_fw_pkey_sz(u32 size)
+static u16 to_fw_pkey_sz(struct mlx5_core_dev *dev, u32 size)
 {
 	switch (size) {
 	case 128:
@@ -335,7 +337,7 @@ static u16 to_fw_pkey_sz(u32 size)
 	case 4096:
 		return 5;
 	default:
-		printf("mlx5_core: WARN: ""invalid pkey table size %d\n", size);
+		mlx5_core_warn(dev, "invalid pkey table size %d\n", size);
 		return 0;
 	}
 }
@@ -430,7 +432,7 @@ static int handle_hca_cap(struct mlx5_core_dev *dev)
 		      128);
 	/* we limit the size of the pkey table to 128 entries for now */
 	MLX5_SET(cmd_hca_cap, set_hca_cap, pkey_table_size,
-		 to_fw_pkey_sz(128));
+		 to_fw_pkey_sz(dev, 128));
 
 	if (prof->mask & MLX5_PROF_MASK_QP_SIZE)
 		MLX5_SET(cmd_hca_cap, set_hca_cap, log_max_qp,
@@ -544,11 +546,11 @@ static int mlx5_core_set_issi(struct mlx5_core_dev *de
 
 		mlx5_cmd_mbox_status(query_out, &status, &syndrome);
 		if (status == MLX5_CMD_STAT_BAD_OP_ERR) {
-			pr_debug("Only ISSI 0 is supported\n");
+			mlx5_core_dbg(dev, "Only ISSI 0 is supported\n");
 			return 0;
 		}
 
-		printf("mlx5_core: ERR: ""failed to query ISSI\n");
+		mlx5_core_err(dev, "failed to query ISSI\n");
 		return err;
 	}
 
@@ -563,7 +565,7 @@ static int mlx5_core_set_issi(struct mlx5_core_dev *de
 
 		err = mlx5_cmd_exec(dev, set_in, sizeof(set_in), set_out, sizeof(set_out));
 		if (err) {
-			printf("mlx5_core: ERR: ""failed to set ISSI=1 err(%d)\n", err);
+			mlx5_core_err(dev, "failed to set ISSI=1 err(%d)\n", err);
 			return err;
 		}
 
@@ -850,13 +852,13 @@ static int mlx5_pci_init(struct mlx5_core_dev *dev, st
 
 	err = mlx5_pci_enable_device(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Cannot enable PCI device, aborting\n");
+		mlx5_core_err(dev, "Cannot enable PCI device, aborting\n");
 		goto err_dbg;
 	}
 
 	err = request_bar(pdev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""error requesting BARs, aborting\n");
+		mlx5_core_err(dev, "error requesting BARs, aborting\n");
 		goto err_disable;
 	}
 
@@ -864,7 +866,7 @@ static int mlx5_pci_init(struct mlx5_core_dev *dev, st
 
 	err = set_dma_caps(pdev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Failed setting DMA capabilities mask, aborting\n");
+		mlx5_core_err(dev, "Failed setting DMA capabilities mask, aborting\n");
 		goto err_clr_master;
 	}
 
@@ -872,7 +874,7 @@ static int mlx5_pci_init(struct mlx5_core_dev *dev, st
 	dev->iseg = ioremap(dev->iseg_base, sizeof(*dev->iseg));
 	if (!dev->iseg) {
 		err = -ENOMEM;
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Failed mapping initialization segment, aborting\n");
+		mlx5_core_err(dev, "Failed mapping initialization segment, aborting\n");
 		goto err_clr_master;
 	}
 
@@ -895,28 +897,27 @@ static void mlx5_pci_close(struct mlx5_core_dev *dev, 
 
 static int mlx5_init_once(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
 {
-	struct pci_dev *pdev = dev->pdev;
 	int err;
 
 	err = mlx5_vsc_find_cap(dev);
 	if (err)
-		dev_err(&pdev->dev, "Unable to find vendor specific capabilities\n");
+		mlx5_core_err(dev, "Unable to find vendor specific capabilities\n");
 
 	err = mlx5_query_hca_caps(dev);
 	if (err) {
-		dev_err(&pdev->dev, "query hca failed\n");
+		mlx5_core_err(dev, "query hca failed\n");
 		goto out;
 	}
 
 	err = mlx5_query_board_id(dev);
 	if (err) {
-		dev_err(&pdev->dev, "query board id failed\n");
+		mlx5_core_err(dev, "query board id failed\n");
 		goto out;
 	}
 
 	err = mlx5_eq_init(dev);
 	if (err) {
-		dev_err(&pdev->dev, "failed to initialize eq\n");
+		mlx5_core_err(dev, "failed to initialize eq\n");
 		goto out;
 	}
 
@@ -924,7 +925,7 @@ static int mlx5_init_once(struct mlx5_core_dev *dev, s
 
 	err = mlx5_init_cq_table(dev);
 	if (err) {
-		dev_err(&pdev->dev, "failed to initialize cq table\n");
+		mlx5_core_err(dev, "failed to initialize cq table\n");
 		goto err_eq_cleanup;
 	}
 
@@ -938,7 +939,7 @@ static int mlx5_init_once(struct mlx5_core_dev *dev, s
 #ifdef RATELIMIT
 	err = mlx5_init_rl_table(dev);
 	if (err) {
-		dev_err(&pdev->dev, "Failed to init rate limiting\n");
+		mlx5_core_err(dev, "Failed to init rate limiting\n");
 		goto err_tables_cleanup;
 	}
 #endif
@@ -976,17 +977,16 @@ static void mlx5_cleanup_once(struct mlx5_core_dev *de
 static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv,
 			 bool boot)
 {
-	struct pci_dev *pdev = dev->pdev;
 	int err;
 
 	mutex_lock(&dev->intf_state_mutex);
 	if (test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) {
-		dev_warn(&dev->pdev->dev, "%s: interface is up, NOP\n",
-			 __func__);
+		mlx5_core_warn(dev, "interface is up, NOP\n");
 		goto out;
 	}
 
-	device_printf((&pdev->dev)->bsddev, "INFO: ""firmware version: %d.%d.%d\n", fw_rev_maj(dev), fw_rev_min(dev), fw_rev_sub(dev));
+	mlx5_core_dbg(dev, "firmware version: %d.%d.%d\n",
+	    fw_rev_maj(dev), fw_rev_min(dev), fw_rev_sub(dev));
 
 	/*
 	 * On load removing any previous indication of internal error,
@@ -996,103 +996,103 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, st
 
 	err = mlx5_cmd_init(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Failed initializing command interface, aborting\n");
+		mlx5_core_err(dev, "Failed initializing command interface, aborting\n");
 		goto out_err;
 	}
 
 	err = wait_fw_init(dev, FW_INIT_TIMEOUT_MILI);
 	if (err) {
-		device_printf((&dev->pdev->dev)->bsddev, "ERR: ""Firmware over %d MS in initializing state, aborting\n", FW_INIT_TIMEOUT_MILI);
+		mlx5_core_err(dev, "Firmware over %d MS in initializing state, aborting\n", FW_INIT_TIMEOUT_MILI);
 		goto err_cmd_cleanup;
 	}
 
 	err = mlx5_core_enable_hca(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""enable hca failed\n");
+		mlx5_core_err(dev, "enable hca failed\n");
 		goto err_cmd_cleanup;
 	}
 
 	err = mlx5_core_set_issi(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""failed to set issi\n");
+		mlx5_core_err(dev, "failed to set issi\n");
 		goto err_disable_hca;
 	}
 
 	err = mlx5_pagealloc_start(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""mlx5_pagealloc_start failed\n");
+		mlx5_core_err(dev, "mlx5_pagealloc_start failed\n");
 		goto err_disable_hca;
 	}
 
 	err = mlx5_satisfy_startup_pages(dev, 1);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""failed to allocate boot pages\n");
+		mlx5_core_err(dev, "failed to allocate boot pages\n");
 		goto err_pagealloc_stop;
 	}
 
 	err = set_hca_ctrl(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""set_hca_ctrl failed\n");
+		mlx5_core_err(dev, "set_hca_ctrl failed\n");
 		goto reclaim_boot_pages;
 	}
 
 	err = handle_hca_cap(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""handle_hca_cap failed\n");
+		mlx5_core_err(dev, "handle_hca_cap failed\n");
 		goto reclaim_boot_pages;
 	}
 
 	err = handle_hca_cap_atomic(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""handle_hca_cap_atomic failed\n");
+		mlx5_core_err(dev, "handle_hca_cap_atomic failed\n");
 		goto reclaim_boot_pages;
 	}
 
 	err = mlx5_satisfy_startup_pages(dev, 0);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""failed to allocate init pages\n");
+		mlx5_core_err(dev, "failed to allocate init pages\n");
 		goto reclaim_boot_pages;
 	}
 
 	err = mlx5_cmd_init_hca(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""init hca failed\n");
+		mlx5_core_err(dev, "init hca failed\n");
 		goto reclaim_boot_pages;
 	}
 
 	mlx5_start_health_poll(dev);
 
 	if (boot && mlx5_init_once(dev, priv)) {
-		dev_err(&pdev->dev, "sw objs init failed\n");
+		mlx5_core_err(dev, "sw objs init failed\n");
 		goto err_stop_poll;
 	}
 
 	err = mlx5_enable_msix(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""enable msix failed\n");
+		mlx5_core_err(dev, "enable msix failed\n");
 		goto err_cleanup_once;
 	}
 
 	err = mlx5_alloc_uuars(dev, &priv->uuari);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Failed allocating uar, aborting\n");
+		mlx5_core_err(dev, "Failed allocating uar, aborting\n");
 		goto err_disable_msix;
 	}
 
 	err = mlx5_start_eqs(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Failed to start pages and async EQs\n");
+		mlx5_core_err(dev, "Failed to start pages and async EQs\n");
 		goto err_free_uar;
 	}
 
 	err = alloc_comp_eqs(dev);
 	if (err) {
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Failed to alloc completion EQs\n");
+		mlx5_core_err(dev, "Failed to alloc completion EQs\n");
 		goto err_stop_eqs;
 	}
 
 	if (map_bf_area(dev))
-		device_printf((&pdev->dev)->bsddev, "ERR: ""Failed to map blue flame area\n");
+		mlx5_core_err(dev, "Failed to map blue flame area\n");
 
 	err = mlx5_init_fs(dev);
 	if (err) {
@@ -1108,13 +1108,13 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, st
 
 	err = mlx5_fpga_device_start(dev);
 	if (err) {
-		dev_err(&pdev->dev, "fpga device start failed %d\n", err);
+		mlx5_core_err(dev, "fpga device start failed %d\n", err);
 		goto err_mpfs;
 	}
 
 	err = mlx5_register_device(dev);
 	if (err) {
-		dev_err(&pdev->dev, "mlx5_register_device failed %d\n", err);
+		mlx5_core_err(dev, "mlx5_register_device failed %d\n", err);
 		goto err_fpga;
 	}
 
@@ -1153,7 +1153,7 @@ err_cleanup_once:
 err_stop_poll:
 	mlx5_stop_health_poll(dev, boot);
 	if (mlx5_cmd_teardown_hca(dev)) {
-		device_printf((&dev->pdev->dev)->bsddev, "ERR: ""tear_down_hca failed, skip cleanup\n");
+		mlx5_core_err(dev, "tear_down_hca failed, skip cleanup\n");
 		goto out_err;
 	}
 
@@ -1186,7 +1186,7 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, 
 
 	mutex_lock(&dev->intf_state_mutex);
 	if (!test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) {
-		dev_warn(&dev->pdev->dev, "%s: interface is down, NOP\n", __func__);
+		mlx5_core_warn(dev, "%s: interface is down, NOP\n", __func__);
                 if (cleanup)
                         mlx5_cleanup_once(dev);
 		goto out;
@@ -1208,7 +1208,7 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, 
 	mlx5_stop_health_poll(dev, cleanup);
 	err = mlx5_cmd_teardown_hca(dev);
 	if (err) {
-		device_printf((&dev->pdev->dev)->bsddev, "ERR: ""tear_down_hca failed, skip cleanup\n");
+		mlx5_core_err(dev, "tear_down_hca failed, skip cleanup\n");
 		goto out;
 	}
 	mlx5_pagealloc_stop(dev);
@@ -1276,7 +1276,9 @@ static int init_one(struct pci_dev *pdev,
 		priv->pci_dev_data = id->driver_data;
 
 	if (mlx5_prof_sel < 0 || mlx5_prof_sel >= ARRAY_SIZE(profiles)) {
-		device_printf(bsddev, "WARN: selected profile out of range, selecting default (%d)\n", MLX5_DEFAULT_PROF);
+		device_printf(bsddev,
+		    "WARN: selected profile out of range, selecting default (%d)\n",
+		    MLX5_DEFAULT_PROF);
 		mlx5_prof_sel = MLX5_DEFAULT_PROF;
 	}
 	dev->profile = &profiles[mlx5_prof_sel];
@@ -1342,13 +1344,13 @@ static int init_one(struct pci_dev *pdev,
 	mtx_init(&dev->dump_lock, "mlx5dmp", NULL, MTX_DEF | MTX_NEW);
 	err = mlx5_pci_init(dev, priv);
 	if (err) {
-		device_printf(bsddev, "ERR: mlx5_pci_init failed %d\n", err);
+		mlx5_core_err(dev, "mlx5_pci_init failed %d\n", err);
 		goto clean_dev;
 	}
 
 	err = mlx5_health_init(dev);
 	if (err) {
-		device_printf(bsddev, "ERR: mlx5_health_init failed %d\n", err);
+		mlx5_core_err(dev, "mlx5_health_init failed %d\n", err);
 		goto close_pci;
 	}
 
@@ -1356,7 +1358,7 @@ static int init_one(struct pci_dev *pdev,
 
 	err = mlx5_load_one(dev, priv, true);
 	if (err) {
-		device_printf(bsddev, "ERR: mlx5_load_one failed %d\n", err);
+		mlx5_core_err(dev, "mlx5_load_one failed %d\n", err);
 		goto clean_health;
 	}
 
@@ -1386,7 +1388,7 @@ static void remove_one(struct pci_dev *pdev)
 	struct mlx5_priv *priv = &dev->priv;
 
 	if (mlx5_unload_one(dev, priv, true)) {
-		dev_err(&dev->pdev->dev, "mlx5_unload_one failed\n");
+		mlx5_core_err(dev, "mlx5_unload_one failed\n");
 		mlx5_health_cleanup(dev);
 		return;
 	}
@@ -1407,7 +1409,7 @@ static pci_ers_result_t mlx5_pci_err_detected(struct p
 	struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
 	struct mlx5_priv *priv = &dev->priv;
 
-	dev_info(&pdev->dev, "%s was called\n", __func__);
+	mlx5_core_info(dev, "%s was called\n", __func__);
 	mlx5_enter_error_state(dev, false);
 	mlx5_unload_one(dev, priv, false);
 
@@ -1425,12 +1427,12 @@ static pci_ers_result_t mlx5_pci_slot_reset(struct pci
 	struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
 	int err = 0;
 
-	dev_info(&pdev->dev, "%s was called\n", __func__);
+	mlx5_core_info(dev,"%s was called\n", __func__);
 
 	err = mlx5_pci_enable_device(dev);
 	if (err) {
-		dev_err(&pdev->dev, "%s: mlx5_pci_enable_device failed with error code: %d\n"
-			, __func__, err);
+		mlx5_core_err(dev, "mlx5_pci_enable_device failed with error code: %d\n"
+			,err);
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 	pci_set_master(pdev);
@@ -1458,29 +1460,31 @@ static void wait_vital(struct pci_dev *pdev)
 	msleep(1000);
 	for (i = 0; i < niter; i++) {
 		if (pci_read_config_word(pdev, 2, &did)) {
-			dev_warn(&pdev->dev, "failed reading config word\n");
+			mlx5_core_warn(dev, "failed reading config word\n");
 			break;
 		}
 		if (did == pdev->device) {
-			dev_info(&pdev->dev, "device ID correctly read after %d iterations\n", i);
+			mlx5_core_info(dev,
+			    "device ID correctly read after %d iterations\n", i);
 			break;
 		}
 		msleep(50);
 	}
 	if (i == niter)
-		dev_warn(&pdev->dev, "%s-%d: could not read device ID\n", __func__, __LINE__);
+		mlx5_core_warn(dev, "could not read device ID\n");
 
 	for (i = 0; i < niter; i++) {
 		count = ioread32be(health->health_counter);
 		if (count && count != 0xffffffff) {
-			dev_info(&pdev->dev, "Counter value 0x%x after %d iterations\n", count, i);
+			mlx5_core_info(dev,
+			"Counter value 0x%x after %d iterations\n", count, i);
 			break;
 		}
 		msleep(50);
 	}
 
 	if (i == niter)
-		dev_warn(&pdev->dev, "%s-%d: could not read device ID\n", __func__, __LINE__);
+		mlx5_core_warn(dev, "could not read device ID\n");
 }
 
 static void mlx5_pci_resume(struct pci_dev *pdev)
@@ -1489,16 +1493,16 @@ static void mlx5_pci_resume(struct pci_dev *pdev)
 	struct mlx5_priv *priv = &dev->priv;
 	int err;
 
-	dev_info(&pdev->dev, "%s was called\n", __func__);
+	mlx5_core_info(dev,"%s was called\n", __func__);
 
 	wait_vital(pdev);
 
 	err = mlx5_load_one(dev, priv, false);
 	if (err)
-		dev_err(&pdev->dev, "%s: mlx5_load_one failed with error code: %d\n"
-			, __func__, err);
+		mlx5_core_err(dev,
+		    "mlx5_load_one failed with error code: %d\n" ,err);
 	else
-		dev_info(&pdev->dev, "%s: device recovered\n", __func__);
+		mlx5_core_info(dev,"device recovered\n");
 }
 
 static const struct pci_error_handlers mlx5_err_handler = {

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_mpfs.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_mpfs.c	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_mpfs.c	Wed Oct  2 09:48:01 2019	(r352975)
@@ -33,6 +33,8 @@
 #include <dev/mlx5/mpfs.h>
 #include <dev/mlx5/driver.h>
 
+#include "mlx5_core.h"
+
 #define	MPFS_LOCK(dev) spin_lock(&(dev)->mpfs.spinlock)
 #define	MPFS_UNLOCK(dev) spin_unlock(&(dev)->mpfs.spinlock)
 
@@ -119,7 +121,7 @@ mlx5_mpfs_destroy(struct mlx5_core_dev *dev)
 
 	num = bitmap_weight(dev->mpfs.bitmap, MLX5_MPFS_TABLE_MAX);
 	if (num != 0)
-		dev_err(&dev->pdev->dev, "Leaking %u MPFS MAC table entries\n", num);
+		mlx5_core_err(dev, "Leaking %u MPFS MAC table entries\n", num);
 
 	spin_lock_destroy(&dev->mpfs.spinlock);
 }

Modified: head/sys/dev/mlx5/mlx5_core/mlx5_port.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_core/mlx5_port.c	Wed Oct  2 09:46:14 2019	(r352974)
+++ head/sys/dev/mlx5/mlx5_core/mlx5_port.c	Wed Oct  2 09:48:01 2019	(r352975)
@@ -618,7 +618,7 @@ out:
 }
 EXPORT_SYMBOL_GPL(mlx5_core_access_ptys);
 
-static int mtu_to_ib_mtu(int mtu)
+static int mtu_to_ib_mtu(struct mlx5_core_dev *dev, int mtu)
 {
 	switch (mtu) {
 	case 256: return 1;
@@ -627,7 +627,7 @@ static int mtu_to_ib_mtu(int mtu)
 	case 2048: return 4;
 	case 4096: return 5;
 	default:

*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201910020948.x929m1ld017058>