Date: Mon, 21 Jan 2008 08:53:30 GMT From: Andrey Lykhin <lian@kras.ru> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/119851: panic: ffs_dirbad: bad dir or panic: ffs_valloc: dup_alloc Message-ID: <200801210853.m0L8rU9w073483@www.freebsd.org> Resent-Message-ID: <200801210900.m0L906Kw038195@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 119851 >Category: misc >Synopsis: panic: ffs_dirbad: bad dir or panic: ffs_valloc: dup_alloc >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Jan 21 09:00:06 UTC 2008 >Closed-Date: >Last-Modified: >Originator: Andrey Lykhin >Release: FreeBSD 6.3-RELEASE >Organization: >Environment: FreeBSD test 6.3-RELEASE FreeBSD 6.3-RELEASE #0: Wed Jan 16 04:18:52 UTC 2008 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 >Description: Do not install FreeBSD 6.3-RELEASE (or FreeBSD 6.2-RELEASE or FreeBSD 7.0-RC1) on HP ProLiant DL145G3 with SATA HDD SAMSUNG HD501LJ. With SATA HDD HP 80GB installation is OK. In an installation time: panic: ffs_dirbad: bad dir or mode=020141, inum=32896, fs=/tmp panic: ffs_valloc: dup alloc Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-RELEASE #0: Wed Jan 16 04:18:52 UTC 2008 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <PTLTD APIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Dual-Core AMD Opteron(tm) Processor 2210 HE (1795.51-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40f12 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 real memory = 1064697856 (1015 MB) avail memory = 1032851456 (985 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 04:16:19) acpi0: <PTLTD XSDT> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pci2: <ACPI PCI bus> on pcib2 atapci0: <ServerWorks HT1000 SATA150 controller> port 0x2040-0x2047,0x2034-0x2037,0x2038-0x203f,0x2030-0x2033,0x2000-0x201f mem 0xdf900000-0xdf901fff irq 7 at device 14.0 on pci1 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 ata5: <ATA channel 3> on atapci0 atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 2.1 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xdfc05000-0xdfc05fff irq 10 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xdfc06000-0xdfc06fff irq 10 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xdfc07000-0xdfc07fff irq 10 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered uhub3: vendor 0x04cc product 0x1520, class 9/0, rev 2.00/2.00, addr 2 uhub3: single transaction translator uhub3: 3 ports with 3 removable, self powered pci0: <display, VGA> at device 4.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 32 at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 32 at device 8.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 32 at device 10.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 pci8: <ACPI PCI bus> on pcib8 bge0: <Broadcom BCM5715 A3, ASIC rev. 0x9003> mem 0xdf810000-0xdf81ffff,0xdf800000-0xdf80ffff irq 36 at device 4.0 on pci8 miibus0: <MII bus> on bge0 brgphy0: <BCM5714 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:18:71:86:db:fc bge1: <Broadcom BCM5715 A3, ASIC rev. 0x9003> mem 0xdf830000-0xdf83ffff,0xdf820000-0xdf82ffff irq 36 at device 4.1 on pci8 miibus1: <MII bus> on bge1 brgphy1: <BCM5714 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:18:71:87:30:fe atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1 kbd2 at ukbd0 ums0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1 ums0: 8 buttons and Z dir. Timecounter "TSC" frequency 1795509657 Hz quality 800 Timecounters tick every 1.000 msec hptrr: no controller detected. ad4: 476940MB <SAMSUNG HD501LJ CR100-12> at ata2-master SATA150 ad6: 476940MB <SAMSUNG HD501LJ CR100-12> at ata3-master SATA150 Trying to mount root from ufs:/dev/ad4s1a bge0: link state changed to UP >How-To-Repeat: Install FreeBSD 6.3-RELEASE (or FreeBSD 6.2-RELEASE or FreeBSD 7.0-RC1) on HP ProLiant DL145G3 with HDD SAMSUNG HD501LJ. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200801210853.m0L8rU9w073483>