Date: Fri, 19 Nov 1999 17:29:31 +0100 From: Ollivier Robert <roberto@eurocontrol.fr> To: FreeBSD Current Users' list <freebsd-current@FreeBSD.ORG> Subject: XFree86 3.3.5 [LONG] Message-ID: <19991119172931.G93702@caerdonn.eurocontrol.fr>
next in thread | raw e-mail | index | archive | help
Is anyone able to build or even link a single program with XFree86 3.3.5 building system ? The damn things defines CppCmd to /lib/cpp and the Makefiles generated are completely fscked up. This is under CURRENT. I tried the 3.x binaries but xinit is dumping core (!!). 401 [15:56] root@thendara:lib/Server# ./mkmf + rm -f Makefile.bak + mv Makefile Makefile.bak + ./config/imake/imake -I. -I./config/cf -DXF86LinkKit=1 -DTOPDIR=. -DCURDIR=. + make Makefiles "Makefile", line 677: Missing dependency operator "Makefile", line 721: Missing dependency operator "Makefile", line 753: Missing dependency operator "Makefile", line 797: Missing dependency operator "Makefile", line 822: Missing dependency operator "Makefile", line 835: Missing dependency operator "Makefile", line 869: Missing dependency operator make: fatal errors encountered -- cannot continue I tried rebuilding just xinit but the build fails for startx... 416 [16:54] root@thendara:programs/xinit# xmkmf -a mv -f Makefile Makefile.bak imake -DUseInstalled -I/usr/X11R6/lib/X11/config make Makefiles make includes make depend makedepend -- -I/usr/X11R6/include -DTCPCONN -DUNIXCONN -DHAS_STICKY_DIR_BIT -DHAS_VFORK -DBINDIR=\"/usr/X11R6/bin\" -- xinit.c 417 [16:54] root@thendara:programs/xinit# make cc -O -I/usr/X11R6/include -DTCPCONN -DUNIXCONN -DHAS_STICKY_DIR_BIT -DHAS_VFORK -DBINDIR=\"/usr/X11R6/bin\" -c xinit.c xinit.c: In function `processTimeout': xinit.c:512: warning: passing arg 1 of `wait3' from incompatible pointer type rm -f xinit cc -o xinit -O -L/usr/X11R6/lib xinit.o -lXmu -lXext -lX11 rm -f startx /lib/cpp -DXINITDIR=/usr/X11R6/lib/X11/xinit -DBINDIR=/usr/X11R6/bin <startx.cpp | sed -e '/^# *[0-9][0-9]* *.*$/d' -e '/^XCOMM$/s//#/' -e '/^XCOMM[^a-zA-Z0-9_]/s/^XCOMM/#/' >startx /lib/cpp: not found chmod a+x startx Even with this xinit binary, the X server can't run... XFree86 Version 3.3.5 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: August 23 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 3.1-STABLE i386 [ELF] Configured drivers: GLINT: accelerated server for 3DLabs GLINT graphics adapters (Patchlevel 0) Using syscons driver with X support (version 2.0) (using VT number 9) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: disabled (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/sysmouse, buttons: 3 (**) GLINT: Graphics device ID: "ELSA GLoria Synergy" (**) GLINT: Monitor ID: "NEC P1250+" (--) GLINT: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) GLINT: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) GLINT: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) GLINT: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) GLINT: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) GLINT: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" PCI: Probing config type using method 1 PCI: Config type is 1 PCI: Bus 0x0 Card 0x00 Func 0x0 ID 0x8086,0x7190 Rev 0x03 Class 0x06,0x00 PCI: Bus 0x0 Card 0x01 Func 0x0 ID 0x8086,0x7191 Rev 0x03 Class 0x06,0x04 PCI: Bus 0x0 Card 0x07 Func 0x0 ID 0x8086,0x7110 Rev 0x02 Class 0x06,0x01 PCI: Bus 0x0 Card 0x07 Func 0x1 ID 0x8086,0x7111 Rev 0x01 Class 0x01,0x01 PCI: Bus 0x0 Card 0x07 Func 0x2 ID 0x8086,0x7112 Rev 0x01 Class 0x0c,0x03 PCI: Bus 0x0 Card 0x07 Func 0x3 ID 0x8086,0x7113 Rev 0x02 Class 0x06,0x80 PCI: Bus 0x0 Card 0x13 Func 0x0 ID 0x1011,0x0024 Rev 0x03 Class 0x06,0x04 PCI: Bus 0x1 Card 0x00 Func 0x0 ID 0x104c,0x3d07 Rev 0x11 Class 0x03,0x00 PCI: Bus 0x1 Card 0x00 Func 0x1 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x2 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x3 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x4 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x5 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x6 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x7 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x2 Card 0x04 Func 0x0 ID 0x1000,0x000f Rev 0x26 Class 0x01,0x00 PCI: Bus 0x2 Card 0x05 Func 0x0 ID 0x1022,0x2000 Rev 0x36 Class 0x02,0x00 (--) GLINT: found TI chip GLINT Permedia 2 at card #0 func #0 with base 0xfebc0000 (--) GLINT: Framebuffer address at 0xfe000000 (--) GLINT: videoram : 8192k (--) GLINT: Using builtin RAMDAC of Permedia 2 chip (--) GLINT: Fitted Memory type is : SGRAM (--) GLINT: VGA core is : Enabled (--) GLINT: Maximum allowed dot-clock: 230.000 MHz (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Mode "1600x1200": mode clock = 162.000 (**) GLINT: Mode "1152x864": mode clock = 135.000 (**) GLINT: Mode "1280x1024": mode clock = 135.000 (**) GLINT: Mode "1024x768": mode clock = 115.500 (--) GLINT: Using XAA (XFree86 Acceleration Architecture) (--) GLINT: XAA: Solid filled rectangles (--) GLINT: XAA: Screen-to-screen copy (--) GLINT: XAA: Using 12 128x128 areas for pixmap caching (--) GLINT: XAA: Caching tiles and non-transparent stipples (--) GLINT: XAA: Horizontal and vertical lines and segments mesg: ttyname: Inappropriate ioctl for device gbuffy: not found xemacs: not found xearth 1.0: warning - unable to open marker info file xterm: no available ptys Console: no available ptys xterm: no available ptys waiting for X server to shut down XFree86 Version 3.3.5 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: August 23 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 3.1-STABLE i386 [ELF] Configured drivers: GLINT: accelerated server for 3DLabs GLINT graphics adapters (Patchlevel 0) Using syscons driver with X support (version 2.0) (using VT number 9) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: disabled (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/sysmouse, buttons: 3 (**) GLINT: Graphics device ID: "ELSA GLoria Synergy" (**) GLINT: Monitor ID: "NEC P1250+" (--) GLINT: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) GLINT: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) GLINT: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) GLINT: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) GLINT: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) GLINT: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" PCI: Probing config type using method 1 PCI: Config type is 1 PCI: Bus 0x0 Card 0x00 Func 0x0 ID 0x8086,0x7190 Rev 0x03 Class 0x06,0x00 PCI: Bus 0x0 Card 0x01 Func 0x0 ID 0x8086,0x7191 Rev 0x03 Class 0x06,0x04 PCI: Bus 0x0 Card 0x07 Func 0x0 ID 0x8086,0x7110 Rev 0x02 Class 0x06,0x01 PCI: Bus 0x0 Card 0x07 Func 0x1 ID 0x8086,0x7111 Rev 0x01 Class 0x01,0x01 PCI: Bus 0x0 Card 0x07 Func 0x2 ID 0x8086,0x7112 Rev 0x01 Class 0x0c,0x03 PCI: Bus 0x0 Card 0x07 Func 0x3 ID 0x8086,0x7113 Rev 0x02 Class 0x06,0x80 PCI: Bus 0x0 Card 0x13 Func 0x0 ID 0x1011,0x0024 Rev 0x03 Class 0x06,0x04 PCI: Bus 0x1 Card 0x00 Func 0x0 ID 0x104c,0x3d07 Rev 0x11 Class 0x03,0x00 PCI: Bus 0x1 Card 0x00 Func 0x1 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x2 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x3 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x4 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x5 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x6 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x1 Card 0x00 Func 0x7 ID 0x0000,0x0000 Rev 0x00 Class 0x00,0x00 PCI: Bus 0x2 Card 0x04 Func 0x0 ID 0x1000,0x000f Rev 0x26 Class 0x01,0x00 PCI: Bus 0x2 Card 0x05 Func 0x0 ID 0x1022,0x2000 Rev 0x36 Class 0x02,0x00 (--) GLINT: found TI chip GLINT Permedia 2 at card #0 func #0 with base 0xfebc0000 (--) GLINT: Framebuffer address at 0xfe000000 (--) GLINT: videoram : 8192k (--) GLINT: Using builtin RAMDAC of Permedia 2 chip (--) GLINT: Fitted Memory type is : SGRAM (--) GLINT: VGA core is : Enabled (--) GLINT: Maximum allowed dot-clock: 230.000 MHz (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Mode "1600x1200": mode clock = 162.000 (**) GLINT: Mode "1152x864": mode clock = 135.000 (**) GLINT: Mode "1280x1024": mode clock = 135.000 (**) GLINT: Mode "1024x768": mode clock = 115.500 (--) GLINT: Using XAA (XFree86 Acceleration Architecture) (--) GLINT: XAA: Solid filled rectangles (--) GLINT: XAA: Screen-to-screen copy (--) GLINT: XAA: Using 12 128x128 areas for pixmap caching (--) GLINT: XAA: Caching tiles and non-transparent stipples (--) GLINT: XAA: Horizontal and vertical lines and segments mesg: ttyname: Inappropriate ioctl for device gbuffy: not found xemacs: not found xearth 1.0: warning - unable to open marker info file Console: no available ptys ^^^^^^^^^^^^^^^^^ -- Ollivier ROBERT -=- Eurocontrol EEC/TEC -=- Ollivier.Robert@eurocontrol.fr The Postman hits! The Postman hits! You have new mail. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991119172931.G93702>