Date: Fri, 30 Jan 2009 08:58:16 +0300 From: Mike Barnard <mike.barnardq@gmail.com> To: Wes Morgan <morganw@chemikals.org> Cc: freebsd-stable@freebsd.org Subject: Re: Unable to boot after upgrade to 7.0 or 7.1 STABLE Message-ID: <7dc029620901292158j21075583q36ac558ddf82c4f5@mail.gmail.com> In-Reply-To: <alpine.BSF.2.00.0901292322570.33814@ibyngvyr.purzvxnyf.bet> References: <7dc029620901290634q7ca5361ct496fc2c4a6bfe53f@mail.gmail.com> <alpine.BSF.2.00.0901292322570.33814@ibyngvyr.purzvxnyf.bet>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Wes, > Have you checked the jumper settings on the drive? There may be a jumper > forcing SATA150 mode on the drive. I'd reset everything to factory defaults > if possible. > It's the first thing I did and I did it for the sake of doing it since this is a brand new computer straight out of HP. The drive is in factory defaults. I have done all the basics; BIOS upgrade, drive settings, BIOS settings..... > You might be able to use the ata driver from 7.0-R in -stable to boot your > system. If that works, try searching for the commit that breaks your > controller. > hmmm.... I did not want to go down this track... I was not sure what else i would break if I did this. -- Mike Of course, you might discount this possibility, but remember that one in a million chances happen 99% of the time. ------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7dc029620901292158j21075583q36ac558ddf82c4f5>