Date: Thu, 28 Jan 1999 10:49:13 PST From: "Frikkie Thirion" <frix_bsd@hotmail.com> To: dick@tar.com Cc: freebsd-emulation@FreeBSD.ORG Subject: Re: Wine and FreeBSD clone port Message-ID: <19990128184927.16746.qmail@hotmail.com>
next in thread | raw e-mail | index | archive | help
>Date: Wed, 27 Jan 1999 15:33:23 -0600 >> I'm currently running 3.0-RELEASE with my ports and src updated >> to present state via CTM. I've rebuild world with the >> -DCOMPAT_LINUX_THREADS and -DVM_STACK switches in >> /etc/make.conf as >> described at http://lt.tar.com. At lt.tar.com I alse found a port for >> FreeBSD which will emulate the Linux thread/clone function. The >> port >> installed like a charm, and I included therefrom the >>-D_THREAD_SAFE and >> -lpthread (as well as some include and lib paths) switches into my >> /etc/make.conf. >> The problem that I'm experiencing is that wine still doesn't detect >>the >> clone function during its auto configuration procedure and >>subsequently >> builds without thread support. >> >> Has anyone had any success with this? > >Not that I know of (you're the first report of trying to compile >wine with the linux threads "port"). Based on what someone told >me a while ago, wine doesn't use "pthread" threads, but rather >calls "clone" directly. Is this your understanding? Yes. If you look at the ports version of wine for FreeBie, you'll see that clone is detected correctly. >If so, there could be a variety of problems, possibly related >to how wine tries to detect the existence of "clone". The >clone call I added to the linux threads "port" wasn't (or >hasn't yet) been designed to do anything other than compile >with the "port". > >If it tries to detect the clone call in the headers, I think >linux glibc declares the clone call in the sched.h header. So, >possibly if you added the clone declarations from clone.h in >the port to your system sched.h headers, they would get detected >if thats how the detection goes. Or, if it examines libc to >find the clone call (this is where it is in linux glibc), we >would maybe have to add the clone call to libc instead of putting >it into the linux pthread library. > >If you can find out how wine goes about detecting the clone >call, let me know and I'll try to help some more. Unfortunately hotmail. won't allow me to attach the wineconfiguration file, so here is it at the bottom. (I hope I didn't bread any copyrights...) Somewhere around line 3182 you'll find the part regarding clone. The problem it seems still is that wine reports that the c and X libs are "non-reentrant" and wount compile with thread support. Any ideas on that? Kind regards Frikkie Thirion #! /bin/sh # From configure.in configure.in 1.00 # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.12 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --disable-emulator build only the Wine library, not the emulator" ac_help="$ac_help --enable-dll build the Wine library as a DLL" ac_help="$ac_help --disable-lib build the Wine without building libwine.a" ac_help="$ac_help --disable-debug compile out all debugging messages" ac_help="$ac_help --disable-trace compile out TRACE messages" ac_help="$ac_help --without-reentrant-x compile for use with non-reentrant X libraries" ac_help="$ac_help --with-x use the X Window System" # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.12" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set these to C if already set. These must not be set unconditionally # because not all systems understand e.g. LANG=C (notably SCO). # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! # Non-C LC_CTYPE values break the ctype check. if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=controls/edit.c # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi ac_aux_dir= for ac_dir in tools $srcdir/tools; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in tools $srcdir/tools" 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # We want these before the checks, so the checks can modify their values. LIBS="$LIBS -lm" test -z "$PROGEXT" && PROGEXT="" MAIN_TARGET=emu LIB_TARGET=libwine.a ALT_LINK="-L\$(TOPOBJDIR) -lwine" TRACE_MSGS=yes # the TRACE() macro DEBUG_MSGS=yes # the TRACE(), WARN(), and FIXME() macros. # Check whether --enable-emulator or --disable-emulator was given. if test "${enable_emulator+set}" = set; then enableval="$enable_emulator" if test "$enableval" = "no"; then MAIN_TARGET="lib"; fi fi # Check whether --enable-dll or --disable-dll was given. if test "${enable_dll+set}" = set; then enableval="$enable_dll" if test "$enableval" = "no"; then : ; else LIB_TARGET="libwine.so.1.0"; fi fi # Check whether --enable-lib or --disable-lib was given. if test "${enable_lib+set}" = set; then enableval="$enable_lib" if test "$enableval" = "no"; then ALT_LINK="\$(LIBOBJS) \$(X11OBJS)"; LIB_TARGET=""; fi fi # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then enableval="$enable_debug" if test "$enableval" = "no"; then DEBUG_MSGS="no"; fi fi # Check whether --enable-trace or --disable-trace was given. if test "${enable_trace+set}" = set; then enableval="$enable_trace" if test "$enableval" = "no"; then TRACE_MSGS="no"; fi fi # Check whether --with-reentrant-x or --without-reentrant-x was given. if test "${with_reentrant_x+set}" = set; then withval="$with_reentrant_x" : fi if test "$DEBUG_MSGS" = "no" then cat >> confdefs.h <<\EOF #define NO_DEBUG_MSGS 1 EOF cat >> confdefs.h <<\EOF #define NO_TRACE_MSGS 1 EOF else if test "$TRACE_MSGS" = "no" then cat >> confdefs.h <<\EOF #define NO_TRACE_MSGS 1 EOF fi fi echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo "configure:639: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF all: @echo 'ac_maketemp="${MAKE}"' EOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftestmake fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$ac_t""yes" 1>&6 SET_MAKE= else echo "$ac_t""no" 1>&6 SET_MAKE="MAKE=${MAKE-make}" fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:668: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:697: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ac_prog_rejected=no for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:745: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <<EOF #line 755 "configure" #include "confdefs.h" main(){return(0);} EOF if { (eval echo configure:759: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cc_cross=no else ac_cv_prog_cc_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_works=no fi rm -fr conftest* echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:779: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo "configure:784: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <<EOF #ifdef __GNUC__ yes; #endif EOF if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:793: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if t ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-emulation" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990128184927.16746.qmail>