Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 04 Jun 2003 05:43:06 +0000
From:      netgeek@speakeasy.net
To:        freebsd-multimedia@freebsd.org
Subject:   Samsung Digimax 200
Message-ID:  <W528616702167431054705386@webmail3>

next in thread | raw e-mail | index | archive | help
----=_vm_0011_W528616702_16743_1054705386
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit

Has anyone had luck with a Samsung Digimax 200? gtkam doesn't recognize that
it is connected to the machine. Are there instructions on how to use USB
digital cameras with gtkam or gphoto on FreeBSD?

% uname -a
FreeBSD pi.localdomain 5.0-RELEASE-p7 FreeBSD 5.0-RELEASE-p7 #0: Fri May
9 20:54:26 EDT 2003     root@pi.localdomain:/usr/obj/usr/src/sys/PI  i386

dmesg attached.

-- 
Mike Burns <netgeek@speakeasy.net> <http://netgeek.ws>;
"If people were meant to eat soy, it would be made of cow." - Nate Ross

----=_vm_0011_W528616702_16743_1054705386
Content-Type: application/octet-stream;
        name="dmesg"
Content-Disposition: attachment;
        filename="dmesg"
Content-Transfer-Encoding: 7bit

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE-p7 #0: Fri May  9 20:54:26 EDT 2003
    root@pi.localdomain:/usr/obj/usr/src/sys/PI
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06e0000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06e00a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 399102156 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.10-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134086656 (127 MB)
avail memory = 122871808 (117 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GATEWA 8DT-078 > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
Using $PIR table, 8 entries at 0xc00f6a80
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Hewlett Packard HP USB CD-Writer Plus, rev 1.00/0.01, addr 2
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <AudioPCI ES1373-A> port 0xef00-0xef3f irq 9 at device 12.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xe800-0xe8ff mem 0xffaffc00-0xffaffcff irq 10 at device 16.0 on pci0
dc0: Ethernet address: 00:00:00:00:00:00
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button0: <Sleep Button> on acpi0
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed, AE_AML_REGION_LIMIT
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad2: 9770MB <Maxtor 5T010H1> [19852/16/63] at ata1-master UDMA33
ad3: 76319MB <MAXTOR 4K080H4> [155061/16/63] at ata1-slave UDMA33
acd0: CDROM <FX4821T> at ata0-master PIO4
umass0: CBI reset failed, TIMEOUT
umass0: CBI reset failed, TIMEOUT
umass0: CBI reset failed, TIMEOUT
umass0: CBI reset failed, TIMEOUT
umass0: CBI reset failed, TIMEOUT
Mounting root from ufs:/dev/ad3s2a


----=_vm_0011_W528616702_16743_1054705386--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?W528616702167431054705386>