Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 12 Apr 2002 14:34:26 +0200
From:      akela@terminal.cz (Honza =?iso-8859-2?q?Du=B9=E1k?=)
To:        freebsd-sparc@freebsd.org
Subject:   Sun Netra X1 - kernel panic when booting 
Message-ID:  <877kndumct.fsf@akela.ti.cz>

next in thread | raw e-mail | index | archive | help

Hello ,
  I have recently got a spare Netra X1 on my table and tried to boot a
  cdrom with FreeBSD for sparc (sparc64-20020321.iso) . Unfortunately
  it stoped when booting the kernel . I would like to help , however
  my experience with sparc system programming is none.

Sun Netra X1 (UltraSPARC-IIe 400MHz), No Keyboard
OpenBoot 4.0, 128 MB memory installed, Serial #16671914.
Ethernet address 8:0:20:fe:64:aa, Host ID: 80fe64aa.


OK boot
nothing to autoload yet.
jumping to kernel entry at 0x80030000.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Mon Mar 18 02:31:18 GMT 2002
    root@u60.locore.ca:/usr/p4/sparc64/sys/sparc64/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0x80354000.
Timecounter "tick"  frequency 400000000 Hz
cpu0: Sun Microsystems UltraSparc-IIe Processor (400.00 MHZ CPU)
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: 60000000 to 7fffffff
pci0: <PCI bus> on pcib0
pci0: <old, non-VGA display device> at device 3.0 (no driver attached)
pci0: <network, ethernet> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, USB> at device 10.0 (no driver attached)
pci0: <network, ethernet> at device 12.0 (no driver attached)
atapci0: <AcerLabs Aladdin ATA66 controller> port 0x10220-0x1022f,0x10208-0x1020b,0x10210-0x10217,0x10218-0x1021b,0x10200-0x10207 irq 12 at device 13.0 on pci0
ata2: at 0x10200 on atapci0
ata3: at 0x10210 on atapci0
panic: isa_alloc_resource: resource list entry out of bus range (0xf00a0000 - 0xf00a07ff not in 0xf0000000 - 0xf0080000)
cpuid = 0; Debugger("panic")
Stopped at      Debugger+0x1c:  ta              %xcc, 1

db> trace
panic() at panic+0xf4
isa_alloc_resource() at isa_alloc_resource+0x334
bus_alloc_resource() at bus_alloc_resource+0x7c
orm_identify() at orm_identify+0x194
bus_generic_probe() at bus_generic_probe+0x58
isa_probe_children() at isa_probe_children+0x4
configure() at configure+0x38
mi_startup() at mi_startup+0x12c
_start() at _start+0x30

-- 
Honza Dusak     HD915-RIPE

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?877kndumct.fsf>