Date: Wed, 21 Mar 2001 08:28:54 +1200 From: "Dan Langille" <dan@langille.org> To: Doug Ambrisko <ambrisko@ambrisko.com> Cc: freebsd-ports@FreeBSD.ORG Subject: Re: sysutils/healthd - working with dual CPUs? Message-ID: <200103202028.f2KKSub74816@ns1.unixathome.org> In-Reply-To: <200103201822.f2KIMqm99123@ambrisko.com> References: <200103200144.f2K1ivb68992@ns1.unixathome.org> "from Dan Langille at Mar 20, 2001 01:44:55 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
On 20 Mar 2001, at 10:22, Doug Ambrisko wrote: > Dan Langille writes: > | Does anyone have healthd working with dual CPUs? My box always > | reports: > | > | Mar 20 13:25:30 xeon healthd: A value of 0.00 for CPU #1 Temperature > | with a range of (10.00 <= n <= 60.00) > | > | $ pkg_info | grep healthd > | healthd-0.6.5 A daemon to monitor vital motherboard parameters > | > | I've not been able to get any help from the author and I've not found > | anyone else with similar issues. I'm running a Supermicro S2DGE with > | two XEON 550s. > > I got it to work using the ISA interface "-I" option. Smbus and > friends don't work on any dual CPU machines I had. If I ran it with > a single CPU then it worked. You might trying a single CPU kernel > just as a sanity check. Currently I don't have any dual CPU machines > that has this hardware now. Not not all motherboard have the ISA > part connected and you can only access it via the i2c bus. Thanks. The -I option still produces: healthd: A value of 0.00 for CPU #1 Temperature with a range of (10.00 <= n <= 60.00) CPU#0 is fine. Here's the output from healtdc: Chip Set Temperature 47.0 CPU #0 Temperature 50.0 CPU #1 Temperature 0.0 CPU #0 Core Voltage 1.97 CPU #1 Core Voltage 1.95 3.3 Volt 3.30 5 Volt 4.84 12 Volt 12.10 -12 Volt -12.49 -5 Volt -5.04 -- Dan Langille pgpkey - finger dan@unixathome.org | http://unixathome.org/finger.php got any work? I'm looking for some. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200103202028.f2KKSub74816>