Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 30 Apr 2002 15:08:25 +0200
From:      Norbert Augenstein <norbert@augenstein.net>
To:        Larry Rosenman <ler@lerctr.org>
Cc:        freebsd-stable@freebsd.org, freebsd-mobile@freebsd.org
Subject:   Re: New Laptop: i810: HELP
Message-ID:  <20020430150825.6478427f.norbert@augenstein.net>
In-Reply-To: <20020430103139.GA177@lerlaptop.lerctr.org>
References:  <20020429164649.GA176@lerlaptop.iadfw.net> <Pine.LNX.4.44.0204291158040.6387-100000@jupiter.linuxengine.net> <20020429170538.GA196@lerlaptop.iadfw.net> <1020106827.22787.16.camel@gyros.marcuscom.com> <1020108438.39799.10.camel@ler-freebie.iadfw.net> <1020127967.466.8.camel@anholt.dyndns.org> <20020430022623.GB1483@lerlaptop.lerctr.org> <20020430103139.GA177@lerlaptop.lerctr.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 30 Apr 2002 05:31:40 -0500
Larry Rosenman <ler@lerctr.org> wrote:

> * Larry Rosenman <ler@airmail.net> [020429 21:29]:
> > * Eric Anholt <eanholt@gladstone.uoregon.edu> [020429 19:54]:
> > > On Mon, 2002-04-29 at 13:27, Larry Rosenman wrote:
> > > > Well with that patch, we still get the same thing, but I suspect Eric
> > > > did more than I did with the chips.
> > > > 
> > > > Eric,
> > > >    I have the I830MG chipset in this laptop, and am willing to
> > > > experiment and get it working on -STABLE. 
> > > > 
> > > >    I currently get a X86 Illegal opcode right after the Gamma Correction
> > > > message in the logs (same as before applying your agp_i810.[ch] patch. 
> > > > 
> > > >    This is on a Fujitsu Lifebook C6651. 
> > > 
> > > Okay, I poked around in this, and I have to say that where it's going
> > > wrong is totally out of my area of knowledge.  As far as I can tell,
> > > it's dying because the bios memory seems to be corrupted, or at least
> > > it's more than the emulator can handle according to Stuart Barkley. 
> > > This is strange because Linux users have had it working.
> > > 
> > > Just to make see if this is an interaction with AGP (since the agp code
> > > has not been successfully used yet that I know of), could you try
> > > removing AGP from your kernel or not modloading it at boot and see how X
> > > works?  It looks like X should handle not having AGP loaded, since you
> > > have 8MB stolen for the card already.  If it does work, you'll be
> > > limited in resolution, but not as badly as those who only have 512k or
> > > 1MB stolen.
> > Playing with it, I can get a 320x200 X up in VGA mode, if I don't 
> > allow int10 to run.  As soon as we bring int10 in, we get the checksum
> > (I suspect we have a mapping issue somewhere). 
> > 
> > Is there anything I can run to map the BIOS ROMS on the machine? 
> > 
> > What can I do to help? 
> > 
> > I'd LOVE to get it running, but I suspect the BIOS mapping into the
> > system is the issue, and I don't know what the maps are. 
> > 
> 
> With the following XF86Config, we get the attached log, and a 320x200
> screen using XFree86 -xf86config XF86Config.ler
> 
> using startx with the same file in /etc/X11/XF86Config, we get a hang.
> 
> Any ideas on how to verify what the BIOS really has?  There are **NO**
> tweaks available in the BIOS setup of the laptop (ACPI Compliant, and
> normally runs Windows XP Home). 
> 
> 
hi,
it seems there is something missing in your config-file
i write some comment to the sections
you have two Monitor/screen sections, normally ther is no need
exept you have a dual-head graphic card.

auge

> 
> 
> Section "ServerLayout"
> 	Identifier     "XFree86 Configured"
> 	Screen      0  "Screen0" 0 0
>	Screen      1  "Screen1" RightOf "Screen0"   #do you have a second monitor ??
> 	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
> 
> Section "Files"
> 	RgbPath      "/usr/X11R6/lib/X11/rgb"
> 	ModulePath   "/usr/X11R6/lib/modules"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
> EndSection
> 
> Section "Module"
> 	#Load  "dbe"
> 	#Load  "dri"
> 	#SubSection  "extmod"
> 	#	option "omit xfree86-dga"
> 	#	option "omit xfree86-vidmodeextension"
> 	#	option "omit xfree86-misc"
> 	#	option "omit sync"
> 	#	option "omit xvideo"
> 	#	option "omit xvideo-motioncompensation"
> 	#	option "omit tog-cup"
> 	#EndSubSection
> 	#Load  "glx"
> 	#Load  "pex5"
> 	#Load  "record"
> 	#Load  "xie"
> 	#Load  "xtrap"
> 	#Load  "speedo"    #load speedo and type1 and you should not get the 2 font warnings 
> 	#Load  "type1"       #
> EndSection
> 
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "keyboard"
                                          # missing! Options "XkbRules"  "xfree86"
                                          #            Options  "XkbModel" "pc105"
                                           #            Options "XkbLayout" "de"
                                            #edit this for your needs!! just an example
> EndSection
> 
> Section "InputDevice"
> 	Identifier  "Mouse0"
> 	Driver      "mouse"
> 	Option	    "Protocol" "SysMouse"       #try "auto" instead of "sysmouse"
> 	Option	    "Device" "/dev/sysmouse"   # set i.e /dev/psm0 see your 'dmesg'
> EndSection
> 
> Section "Monitor"
> 	Identifier   "Monitor0"
> 	VendorName   "Monitor Vendor"
> 	ModelName    "Monitor Model"
                                                      #missing! HorizSync ab.c - yx.z
						      #            VertRefresh de.f - ef.g
							#edit this!!
											
> EndSection
> 
> Section "Monitor"                      #second Monitor???
> 	Identifier   "Monitor1"
> 	VendorName   "Monitor Vendor"
> 	ModelName    "Monitor Model"
> EndSection
> 
> Section "Device"
>         ### Available Driver options are:-
>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>         ### [arg]: arg optional
>         #Option     "NoAccel"            	# [<bool>]
>         #Option     "SWcursor"           	# [<bool>]
>         #Option     "ColorKey"           	# <i>
>         #Option     "CacheLines"         	# <i>
>         #Option     "Dac6Bit"            	# [<bool>]
>         #Option     "DRI"                	# [<bool>]
>         #Option     "NoDDC" "True"             	# [<bool>]
>         #Option     "XvMCSurfaces"       	# <i>
> 	Identifier  "Card0"
> 	Driver      "vga"
> 	VideoRam    8192
> 	#option      "novbe"
> 	VendorName  "Intel"
> 	BoardName   "i830M"
> 	BusID       "PCI:0:2:0"
> EndSection
> 
> Section "Device"                # second Monitor
>         ### Available Driver options are:-
>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>         ### [arg]: arg optional
>         #Option     "NoAccel"            	# [<bool>]
>         #Option     "SWcursor"           	# [<bool>]
>         #Option     "ColorKey"           	# <i>
>         #Option     "CacheLines"         	# <i>
>         #Option     "Dac6Bit"            	# [<bool>]
>         #Option     "DRI"                	# [<bool>]
>         #Option     "NoDDC" "True"             	# [<bool>]
>         #Option     "XvMCSurfaces"       	# <i>
> 	Identifier  "Card1"
> 	Driver      "vga"
> 	#option      "novbe"
> 	VendorName  "Intel"
> 	BoardName   "i830M"
> 	BusID       "PCI:0:2:1"
> EndSection
> 
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	DefaultDepth 8
> 	SubSection "Display"
> 		Depth     1
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     4
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     8
>                 Modes      "1024x768" "800x600" "640x480" #only this will be used
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     15
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     16
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     24
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> EndSection
> 
> Section "Screen"           #
> 	Identifier "Screen1"  #do you really need a second screen entry???
> 	Device     "Card1"
> 	Monitor    "Monitor1"
> 	DefaultDepth 8
> 	SubSection "Display"
> 		Depth     1
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     4
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     8
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     15
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     16
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> 	SubSection "Display"
> 		Depth     24
>                 Modes      "1024x768" "800x600" "640x480"
> 		ViewPort  0 0
> 	EndSubSection
> EndSection
> 
> 
> XFree86 Version 4.2.0 / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 18 January 2002
> 	If the server is older than 6-12 months, or if your card is
> 	newer than the above date, look for a newer version before
> 	reporting problems.  (See http://www.XFree86.Org/)
> Build Operating System: FreeBSD 4.5 i386 [ELF] 
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
>          (++) from command line, (!!) notice, (II) informational,
>          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Tue Apr 30 05:25:25 2002
> (++) Using config file: "XF86Config.ler"
> (==) ServerLayout "XFree86 Configured"
> (**) |-->Screen "Screen0" (0)
> (**) |   |-->Monitor "Monitor0"
> (**) |   |-->Device "Card0"
> (**) |-->Screen "Screen1" (1)
> (**) |   |-->Monitor "Monitor1"
> (**) |   |-->Device "Card1"
> (**) |-->Input Device "Mouse0"
> (**) |-->Input Device "Keyboard0"
> (==) Keyboard: CustomKeycode disabled
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (**) ModulePath set to "/usr/X11R6/lib/modules"
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
> 
> (II) Module ABI versions:
> 	XFree86 ANSI C Emulation: 0.1
> 	XFree86 Video Driver: 0.5
> 	XFree86 XInput driver : 0.3
> 	XFree86 Server Extension : 0.1
> 	XFree86 Font Renderer : 0.3
> (II) Loader running on freebsd
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> 	compiled for 4.2.0, module version = 1.0.0
> 	Module class: XFree86 Font Renderer
> 	ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> 	compiled for 4.2.0, module version = 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 8086,3575 card 10cf,113b rev 04 class 06,00,00 hdr 00
> (II) PCI: 00:02:0: chip 8086,3577 card 10cf,113c rev 04 class 03,00,00 hdr 80
> (II) PCI: 00:02:1: chip 8086,3577 card 10cf,113c rev 00 class 03,80,00 hdr 80
> (II) PCI: 00:1d:0: chip 8086,2482 card 10cf,113d rev 02 class 0c,03,00 hdr 80
> (II) PCI: 00:1d:1: chip 8086,2484 card 10cf,113d rev 02 class 0c,03,00 hdr 00
> (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01
> (II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80
> (II) PCI: 00:1f:1: chip 8086,248a card 10cf,113d rev 02 class 01,01,8a hdr 00
> (II) PCI: 00:1f:3: chip 8086,2483 card 10cf,113d rev 02 class 0c,05,00 hdr 00
> (II) PCI: 00:1f:5: chip 8086,2485 card 10cf,112f rev 02 class 04,01,00 hdr 00
> (II) PCI: 00:1f:6: chip 8086,2486 card 10cf,10d1 rev 02 class 07,03,00 hdr 00
> (II) PCI: 01:0a:0: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82
> (II) PCI: 01:0a:1: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82
> (II) PCI: 01:0d:0: chip 10ec,8139 card 10cf,111c rev 10 class 02,00,00 hdr 00
> (II) PCI: 01:0e:0: chip 10cf,2010 card 10cf,112b rev 01 class 0c,00,10 hdr 00
> (II) PCI: End of PCI scan
> (II) LoadModule: "scanpci"
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> 	compiled for 4.2.0, module version = 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) UnloadModule: "scanpci"
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (II) Host-to-PCI bridge:
> (II) PCI-to-ISA bridge:
> (II) PCI-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus 0 I/O range:
> 	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> 	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> 	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 1: bridge is at (0:30:0), (0,1,3), BCTRL: 0x04 (VGA_EN is cleared)
> (II) Bus 1 I/O range:
> 	[0] -1	0x00002000 - 0x000020ff (0x100) IX[B]
> 	[1] -1	0x00002400 - 0x000024ff (0x100) IX[B]
> 	[2] -1	0x00002800 - 0x000028ff (0x100) IX[B]
> 	[3] -1	0x00002c00 - 0x00002cff (0x100) IX[B]
> (II) Bus 1 non-prefetchable memory range:
> 	[0] -1	0xe0200000 - 0xe02fffff (0x100000) MX[B]
> (II) Bus 1 prefetchable memory range:
> (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus -1 I/O range:
> (II) Bus -1 non-prefetchable memory range:
> (II) Bus -1 prefetchable memory range:
> (--) PCI:*(0:2:0) Intel i830M rev 4, Mem @ 0xe8000000/27, 0xe0000000/19
> (--) PCI: (0:2:1) Intel i830M rev 0, Mem @ 0xf0000000/27, 0xe0080000/19
> (II) Addressable bus resource ranges are
> 	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
> 	[1] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Active PCI resource ranges:
> 	[0] -1	0xe0200000 - 0xe03fffff (0x200000) MX[B]E
> 	[1] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
> 	[2] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> 	[3] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> 	[4] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> 	[5] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> 	[6] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> 	[7] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
> 	[8] -1	0x00001800 - 0x000018ff (0x100) IX[B]E
> 	[9] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
> 	[10] -1	0x00001880 - 0x000018ff (0x80) IX[B]E
> 	[11] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
> 	[12] -1	0x00001c00 - 0x00001cff (0x100) IX[B]E
> 	[13] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
> 	[14] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
> 	[15] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
> 	[16] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
> 	[17] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
> 	[18] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
> 	[19] -1	0x000018c0 - 0x000018ff (0x40) IX[B]E
> (II) PCI Memory resource overlap reduced 0xe0200000 from 0xe03fffff to 0xe02007ff
> (II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000187f
> (II) PCI I/O resource overlap reduced 0x00001880 from 0x000018ff to 0x000018bf
> (II) PCI I/O resource overlap reduced 0x00001c00 from 0x00001cff to 0x00001c1f
> (II) PCI I/O resource overlap reduced 0x000018c0 from 0x000018ff to 0x000018df
> (II) Active PCI resource ranges after removing overlaps:
> 	[0] -1	0xe0200000 - 0xe02007ff (0x800) MX[B]E
> 	[1] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
> 	[2] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> 	[3] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> 	[4] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> 	[5] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> 	[6] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> 	[7] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
> 	[8] -1	0x00001800 - 0x0000187f (0x80) IX[B]E
> 	[9] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
> 	[10] -1	0x00001880 - 0x000018bf (0x40) IX[B]E
> 	[11] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
> 	[12] -1	0x00001c00 - 0x00001c1f (0x20) IX[B]E
> 	[13] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
> 	[14] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
> 	[15] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
> 	[16] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
> 	[17] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
> 	[18] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
> 	[19] -1	0x000018c0 - 0x000018df (0x20) IX[B]E
> (II) OS-reported resource ranges after removing overlaps with PCI:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0xe0200000 - 0xe02007ff (0x800) MX[B]E
> 	[6] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
> 	[7] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> 	[8] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> 	[9] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> 	[10] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> 	[11] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> 	[12] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[13] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[14] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
> 	[15] -1	0x00001800 - 0x0000187f (0x80) IX[B]E
> 	[16] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
> 	[17] -1	0x00001880 - 0x000018bf (0x40) IX[B]E
> 	[18] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
> 	[19] -1	0x00001c00 - 0x00001c1f (0x20) IX[B]E
> 	[20] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
> 	[21] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
> 	[22] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
> 	[23] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
> 	[24] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
> 	[25] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
> 	[26] -1	0x000018c0 - 0x000018df (0x20) IX[B]E
> (II) LoadModule: "vga"
> (II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
> (II) Module vga: vendor="The XFree86 Project"
> 	compiled for 4.2.0, module version = 4.0.0
> 	Module class: XFree86 Video Driver
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> 	compiled for 4.2.0, module version = 1.0.0
> 	Module class: XFree86 XInput Driver
> 	ABI class: XFree86 XInput driver, version 0.3
> (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
> (II) Primary Device is: PCI 00:02:0
> (--) Chipset generic found
> (II) resource ranges after xf86ClaimFixedResources() call:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0xe0200000 - 0xe02007ff (0x800) MX[B]E
> 	[6] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
> 	[7] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> 	[8] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> 	[9] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> 	[10] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> 	[11] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> 	[12] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[13] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[14] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
> 	[15] -1	0x00001800 - 0x0000187f (0x80) IX[B]E
> 	[16] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
> 	[17] -1	0x00001880 - 0x000018bf (0x40) IX[B]E
> 	[18] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
> 	[19] -1	0x00001c00 - 0x00001c1f (0x20) IX[B]E
> 	[20] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
> 	[21] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
> 	[22] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
> 	[23] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
> 	[24] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
> 	[25] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
> 	[26] -1	0x000018c0 - 0x000018df (0x20) IX[B]E
> (II) resource ranges after probing:
> 	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1	0xe0200000 - 0xe02007ff (0x800) MX[B]E
> 	[6] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
> 	[7] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> 	[8] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> 	[9] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> 	[10] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> 	[11] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> 	[12] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
> 	[13] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
> 	[14] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
> 	[15] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[16] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[17] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
> 	[18] -1	0x00001800 - 0x0000187f (0x80) IX[B]E
> 	[19] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
> 	[20] -1	0x00001880 - 0x000018bf (0x40) IX[B]E
> 	[21] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
> 	[22] -1	0x00001c00 - 0x00001c1f (0x20) IX[B]E
> 	[23] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
> 	[24] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
> 	[25] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
> 	[26] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
> 	[27] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
> 	[28] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
> 	[29] -1	0x000018c0 - 0x000018df (0x20) IX[B]E
> 	[30] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
> 	[31] 0	0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> 	compiled for 4.2.0, module version = 1.0.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) VGA(0): initializing int10
> (==) VGA(0): Write-combining range (0xa0000,0x20000) was already clear
> (==) VGA(0): Write-combining range (0xf0000,0x10000)
> (WW) VGA(0): Bad V_BIOS checksum
> (II) VGA(0): Primary V_BIOS segment is: 0xc000
> (**) VGA(0): Depth 8, (--) framebuffer bpp 8
> (==) VGA(0): RGB weight 666
> (==) VGA(0): Default visual is PseudoColor
> (==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
> (**) VGA(0): videoRam: 8192 kBytes (using 64 kBytes).
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> 	compiled for 4.2.0, module version = 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.5
> (II) VGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
> (==) VGA(0): Virtual size is 320x200 (pitch 320)
> (**) VGA(0): Built-in mode "Generic 320x200 default mode": 12.6 MHz (scaled from 25.2 MHz), 31.5 kHz, 70.2 Hz (VScan)
> (II) VGA(0): Modeline "Generic 320x200 default mode"   12.59  320 336 384 400  200 206 207 224 vscan 2 -hsync +vsync
> (==) VGA(0): DPI set to (75, 75)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> 	compiled for 4.2.0, module version = 1.0.0
> 	ABI class: XFree86 ANSI C Emulation, version 0.1
> (II) do I need RAC?  No, I don't.
> (II) resource ranges after preInit:
> 	[0] 0	0xe0000000 - 0xe007ffff (0x80000) MS[B]
> 	[1] 0	0xe8000000 - 0xefffffff (0x8000000) MS[B]
> 	[2] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[3] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[4] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[5] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[6] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[7] -1	0xe0200000 - 0xe02007ff (0x800) MX[B]E
> 	[8] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
> 	[9] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> 	[10] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> 	[11] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> 	[12] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> 	[13] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> 	[14] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
> 	[15] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
> 	[16] 0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
> 	[17] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[18] -1	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[19] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
> 	[20] -1	0x00001800 - 0x0000187f (0x80) IX[B]E
> 	[21] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
> 	[22] -1	0x00001880 - 0x000018bf (0x40) IX[B]E
> 	[23] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
> 	[24] -1	0x00001c00 - 0x00001c1f (0x20) IX[B]E
> 	[25] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
> 	[26] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
> 	[27] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
> 	[28] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
> 	[29] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
> 	[30] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
> 	[31] -1	0x000018c0 - 0x000018df (0x20) IX[B]E
> 	[32] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
> 	[33] 0	0x000003c0 - 0x000003df (0x20) IS[B]
> (==) VGA(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) Setting vga for screen 0.
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (**) Option "Protocol" "SysMouse"
> (**) Mouse0: Protocol: "SysMouse"
> (**) Option "CorePointer"
> (**) Mouse0: Core Pointer
> (**) Option "Device" "/dev/sysmouse"
> (**) Option "BaudRate" "1200"
> (**) Option "StopBits" "2"
> (**) Option "DataBits" "8"
> (**) Option "Parity" "None"
> (**) Option "Vmin" "1"
> (**) Option "Vtime" "0"
> (**) Option "FlowControl" "None"
> (==) Mouse0: Buttons: 3
> (**) Mouse0: BaudRate: 1200
> (II) Keyboard "Keyboard0" handled by legacy driver
> (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
> (**) Option "BaudRate" "1200"
> Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
> Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list!
> --
> Larry Rosenman                     http://www.lerctr.org/~ler
> Phone: +1 972-414-9812                 E-Mail: ler@lerctr.org
> US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020430150825.6478427f.norbert>