Date: Thu, 21 Feb 2013 16:45:23 +0000 From: "Teske, Devin" <Devin.Teske@fisglobal.com> To: Muhammad Junaid <muhammad.junaid@cubexsweatherly.com>, "freebsd-questions@FreeBSD.org" <freebsd-questions@FreeBSD.org> Cc: "Teske, Devin" <Devin.Teske@fisglobal.com> Subject: RE: SAS Driver Support Message-ID: <13CA24D6AB415D428143D44749F57D7201EAC3F3@ltcfiswmsgmb21> In-Reply-To: <A7BE68EC33239A46860DC28C1F440E38D91ECB@AMSPRD0311MB425.eurprd03.prod.outlook.com> References: <A7BE68EC33239A46860DC28C1F440E38D91ECB@AMSPRD0311MB425.eurprd03.prod.outlook.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I did a write-up on hardware integration procedures some time back. Might help... http://lists.freebsd.org/pipermail/freebsd-questions/2012-June/241956.html In addition, I'll add that you don't necessarily have to boot FreeBSD... wh= at I'll often do is boot DruidBSD and run the "Hardware Detection Tool" or = "HDT" by Ewan Velu: http://sourceforge.net/projects/druidbsd/files/Druid-0.0.iso/download That will allow me to get the vendor/device hex values that identify the ca= rd you want to support. Once you have the 4-digit hex values for "vendor id= " and "device id" then it's just a matter of grep'ing the FreeBSD source co= de to find out which module(s) work with that hardware. --=20 Devin ________________________________________ From: owner-freebsd-questions@freebsd.org [owner-freebsd-questions@freebsd.= org] on behalf of Muhammad Junaid [muhammad.junaid@cubexsweatherly.com] Sent: Wednesday, February 20, 2013 9:14 PM To: freebsd-questions@FreeBSD.org Subject: SAS Driver Support Dear Team FreeBSD can support HP D2600 disk enclosure or not? FreeBSD can support SAS controller card (P800\P812) driver or not? Regard's Muhammad Junaid _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" _____________ The information contained in this message is proprietary and/or confidentia= l. If you are not the intended recipient, please: (i) delete the message an= d all copies; (ii) do not disclose, distribute or use the message in any ma= nner; and (iii) notify the sender immediately. In addition, please be aware= that any message addressed to our domain is subject to archiving and revie= w by persons other than the intended recipient. Thank you.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?13CA24D6AB415D428143D44749F57D7201EAC3F3>