Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 17 Nov 2009 19:17:41 -0200
From:      Gonzalo Nemmi <gnemmi@gmail.com>
To:        pyunyh@gmail.com
Cc:        freebsd-acpi@freebsd.org, freebsd-current@freebsd.org
Subject:   Re: Call for bge(4) testers
Message-ID:  <200911171917.41906.gnemmi@gmail.com>
In-Reply-To: <20091117193208.GI1262@michelle.cdnetworks.com>
References:  <20091111223751.GE15449@michelle.cdnetworks.com> <200911171650.06834.gnemmi@gmail.com> <20091117193208.GI1262@michelle.cdnetworks.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 17 November 2009 5:32:08 pm Pyun YongHyeon wrote:
> On Tue, Nov 17, 2009 at 04:50:06PM -0200, Gonzalo Nemmi wrote:
>
> [...]
>
> > Well, I proceeded as I told you I would, applied your patch and
> > even if it didn't solve the problem (bge still doesn't resume) at
> > least it improved the previous situation given that now it doesn't
> > loop timing out once and again as before.
> >
> > You can find a tail from /var/log/messages in here:
> > http://pastebin.com/f643555f7
> >
> > As you can see, the first 3 lines corresponds to "kldload if_bge"
> > Line number 4 is "acpiconf -s3"
> >
> > At line number 17 bge0 finally fails and let's the machine wake up
> > at line 18.
> >
> > Then, as soon as I could I issued a "ifconfig bge0" to see what I
> > could get .. that's what you can see from line 20 to line 41. (as
> > you can see
>
> Ok, would you try this one? I guess bge(4) register access method
> could be in uninitialized state after resume.

Just did .. same result .. you=B4ll find the messages here:
http://pastebin.com/f38369b3c

1.- root login
2 to 9.- "kldload if_bge"
10.- "acpiconf -s3"
11 to 13.- wpi0 messages before suspending
14 to 23.- bge0 messages upon resume
24.- wakeup

BTW: is there an easy way to unroll the patches so I get a pristine copy=20
back and apply the patch over it again? Im asking because the 3rd chunk=20
of your patch ( bge_reset(sc); ) didn't apply cleanly and I had to edit=20
if_bge.c by hand to add that line in the right place.

Still willing to keep on trying and awaiting orders :)

Best Regards
Gonzalo Nemmi

> > in there, I found there are problems resuming umass devices as
> > well ... )
>
> Probably Hans can help you on USB issues.
>
> > Line 42 to 53 correspond to "kldnuload if_bge" .. which, by the
> > way, once unloaded, I could load it again but bge0 never showed on
> > "ifconfig".
> >
> > Line 54 till the end correspond to "umount_msdos /dev/ad0s1" ...
> > which ended with pulling the pendrive out as the system coldn't
> > umount it ...
> >
> > I also found I get wpi0 messages on resume .. it spouts:
> > wpi0 could not lock memory
> > wpi0 could not lock memory
> > wpi0 could not lock memory
> > wpi0 could not lock memory
> > wpi0 could not lock memory
> > wpi0 could not lock memory
> > wpi0 could not lock memory
> > and then it let's the system resume.
>
> Don't know what it really means. You'd be better to ask wpi(4)
> author Benjamin Close(benjsc@).
>
> > All in all  .. there's _a_lot_of_problems_on_resume_
> >
> >
> > Pyun, if you'd like me to try a new patch or to do some tests or
> > whatever, just let me know. I'm here awaiting orders :)
> >
> > Best Regards
> > Gonzalo Nemmi



=2D-=20
Blessings
Gonzalo Nemmi



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200911171917.41906.gnemmi>