Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Mar 2006 03:00:50 +0200 (EET)
From:      Dmitry Pryanishnikov <dmitry@atlantis.dp.ua>
To:        Scott Robbins <scottro@nyc.rr.com>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: Recent 6.1-PRE: burncd: ioctl(CDRIOCFIXATE): Input/output error
Message-ID:  <20060316024135.R94172@atlantis.atlantis.dp.ua>
In-Reply-To: <20060315212713.GC1206@uws1.starlofashions.com>
References:  <20060315205150.GM400@bunrab.catwhisker.org> <20060315212713.GC1206@uws1.starlofashions.com>

next in thread | previous in thread | raw e-mail | index | archive | help

Hello!

On Wed, 15 Mar 2006, Scott Robbins wrote:
>> fixating CD, please wait..
>> burncd: ioctl(CDRIOCFIXATE): Input/output error
>> localhost(6.1-P)[23]
>>
>> There was a fair amount of time -- around 15 - 20 seconds -- between the
>> "fixating CD, please wait.." message and the whine, during which there
>> was activity involving the CD drive.
>>
>> Am I doing something stupid here?
>
> In my case, the CD burns without problem however, I get that error.
> Googling found me a few other people with a similar issue.  Have you
> tried the CD afterwords to see if it works anyway?
>
> Out of curiosity, is it a Plextor drive, I think everyone who had a
> problem was running into it with Plextors.

  No, not only Plextors. Look at this (I'm using already-written TDK CD-RW 80 
disc):

root@homelynx# uname -r
6.1-PRERELEASE
root@homelynx# dmesg|grep acd0
acd0: DVDR <NEC DVD RW ND-3520A/1.04> at ata1-master UDMA33
root@homelynx# burncd -f /dev/acd0 blank data i386cd-3.0.iso fixate
blanking CD - 100 % done
burncd: ioctl(CDIOCSTART): Input/output error
root@homelynx# cdcontrol -f /dev/acd0 i
cdcontrol: getting toc header: Input/output error

Note that disk has actually been blanked; it seems to me that burncd
just issued next command too early (waiting for blank completion
doesn't work properly). OK, re-issue command w/o blank:

root@homelynx# burncd -f /dev/acd0 data i386cd-3.0.iso fixate
next writeable LBA 0
writing from file i386cd-3.0.iso size 204768 KB
written this track 204768 KB (100%) total 204768 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
root@homelynx# cdcontrol -f /dev/acd0 i
Starting track = 1, ending track = 1, TOC size = 18 bytes
track     start  duration   block  length   type
-------------------------------------------------
     1   0:02.00  22:45.11       0  102386   data
   170  22:47.11         -  102386       -      -

Yes, resulting disk is OK, it's waiting for completion which doesn't work
properly.


Sincerely, Dmitry
-- 
Atlantis ISP, System Administrator
e-mail:  dmitry@atlantis.dp.ua
nic-hdl: LYNX-RIPE



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060316024135.R94172>