Date: Tue, 13 Apr 2004 09:28:47 -0400 From: Jeffrey Racine <jracine@maxwell.syr.edu> To: Tilman Linneweh <tilman+2004-04-13@arved.at> Cc: amd64@FreeBSD.org Subject: Re: Openoffice on amd64... possible? Message-ID: <1081862927.644.3.camel@jracine.maxwell.syr.edu> In-Reply-To: <20040413123507.GA11950@arved.at> References: <1081858148.795.4.camel@x1-6-00-b0-d0-c2-67-0e.twcny.rr.com> <20040413123507.GA11950@arved.at>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi.
Sorry for the vagueness of the previous post. I had attempted numerous
ways of installing and that was one of the messages I received. Below
you will see the exact error message during install (I include uname &
dmesg as well)
Here is the output from a fresh install. It is the version of gcc that
is not supported by default... as always, thanks!
-- OpenOffice install output
jracine# portinstall openoffice
---> 2 ports match the given pattern 'openoffice':
editors/openoffice-1.0
editors/openoffice-1.1
Install 'editors/openoffice-1.0'? [yes] no
Install 'editors/openoffice-1.1'? [yes] yes
---> Installing 'openoffice-1.1.1' from a port (editors/openoffice-1.1)
---> Building '/usr/ports/editors/openoffice-1.1'
===> Cleaning for atk-1.6.0
===> Cleaning for rpm-3.0.6_9
===> Cleaning for unzip-5.50_2
===> Cleaning for zip-2.3_1
===> Cleaning for libiconv-1.9.1_3
===> Cleaning for ORBit-0.5.17_2
===> Cleaning for apache-ant-1.6.1_1
===> Cleaning for autoconf-2.53_1
===> Cleaning for autoconf-2.13.000227_5
===> Cleaning for automake-1.4.5_9
===> Cleaning for bison-1.75_2
===> Cleaning for gettext-0.13.1_1
===> Cleaning for glib-1.2.10_10
===> Cleaning for glib-2.4.0
===> Cleaning for gmake-3.80_2
===> Cleaning for imake-4.3.0_2
===> Cleaning for libtool-1.3.5_2
===> Cleaning for m4-1.4_1
===> Cleaning for nspr-4.4.1_1
===> Cleaning for p5-gettext-1.01_4
===> Cleaning for pkgconfig-0.15.0_1
===> Cleaning for popt-1.6.4_2
===> Cleaning for linux_base-7.1_6
===> Cleaning for jpeg-6b_2
===> Cleaning for lcms-1.09_1,1
===> Cleaning for libmng-1.0.7
===> Cleaning for png-1.2.5_3
===> Cleaning for tiff-3.6.1_1
===> Cleaning for diablo-jdk-1.3.1.0_1===> Cleaning for
javavmwrapper-1.5
===> Cleaning for jdk-1.4.2p6_4===> Cleaning for
linux-sun-jdk-1.4.2.04
===> Cleaning for gcc-3.2.3_1
===> Cleaning for perl-5.8.2_5
===> Cleaning for python-2.3.3_4
===> Cleaning for compat4x-amd64-5.2.1
===> Cleaning for help2man-1.33.1
===> Cleaning for hicolor-icon-theme-0.5
===> Cleaning for shared-mime-info-0.14_2
===> Cleaning for freetype2-2.1.7_2
===> Cleaning for coreutils-5.2.1
===> Cleaning for expat-1.95.7
===> Cleaning for intltool-0.30_1
===> Cleaning for libxml2-2.6.8
===> Cleaning for p5-XML-Parser-2.34_1
===> Cleaning for XFree86-fontDefaultBitmaps-4.3.0
===> Cleaning for XFree86-fontEncodings-4.3.0
===> Cleaning for XFree86-fontScalable-4.3.0
===> Cleaning for fontconfig-2.2.2,1
===> Cleaning for libXft-2.1.6
===> Cleaning for urwfonts-1.0
===> Cleaning for XFree86-VirtualFramebufferServer-4.3.0_4
===> Cleaning for gtk-1.2.10_11
===> Cleaning for gtk-2.4.0
===> Cleaning for open-motif-2.2.2_2
===> Cleaning for pango-1.4.0
===> Cleaning for XFree86-clients-4.3.0_7
===> Cleaning for XFree86-libraries-4.3.0_6
===> Cleaning for openoffice-1.1.1
===> Vulnerability check disabled
REQUIREMENTS:
OO requires that the ENV variable LANG
is set to a proper value. Dependent on
which language port you use, OO does
automatically set LANG to a suitable
value. You can change this with:
USE_LANG="preferred language"
and set a different language
like:
en_US.ISO8859-15 en_US.ISO8859-1
US-ASCII
Your current setting is:
USE_LANG=en_US.ISO8859-15
OPTIONS:
You can compile OO with debug symbols
if you call make with WITH_DEBUG=1
If you set WITH_DEBUG=2, you add internal
OO.org debug support.
You may set WITH_TTF_BYTECODE_ENABLED=YES
if you like to use the Freetype library to
render TTF fonts. Normally the TTF lib is
not used to render fonts.
If you have licensed the Apple patents
US05155805 US05159668 and US05325479
you can enable this option to get better
quality of glyphs at small bitmap sizes.
You may set WITH_GIF_LZW_COMPRESSION=YES
If you want to make compressed gif images
If must have license from the Unisys and IBM patents
to enable this option to get compressed GIF images.
According to http://www.unisys.com/about__unisys/lzw
Patent expires:
June 20, 2003 : U.S.
June 18, 2004 : U.K., France, Germany and Italy
June 20, 2004 : Japan
July 7, 2004 : Canada
NOTICE:
To build Openoffice, you should have a lot
of free diskspace (~ 4GB).
If you want SDK and/or solver, please type make sdk and/or make solver
>> OOo_1.1.1p1_source.tar.bz2 doesn't seem to exist in
/usr/ports/distfiles/openoffice1.1.
>> Attempting to fetch from
ftp://www.t.ring.gr.jp/pub/misc/openoffice/stable/1.1.1/.
OOo_1.1.1p1_source.tar.bz2 100% of 183 MB 284 kBps
00m00s
>> gpc231.tar.Z doesn't seem to exist in
/usr/ports/distfiles/openoffice1.1.
>> Attempting to fetch from ftp://ftp.cs.man.ac.uk/pub/toby/gpc/.
gpc231.tar.Z 100% of 27 kB 50 kBps
>> patch-openoffice-mozilla101-2002-10-14 doesn't seem to exist in
/usr/ports/distfiles/openoffice1.1.
>> Attempting to fetch from http://people.freebsd.org/~mbr/ooo/.
patch-openoffice-mozilla101-2002-10-14 100% of 28 kB 86 kBps
>> mozilla-vendor-1.0.2a.tgz doesn't seem to exist in
/usr/ports/distfiles/openoffice1.1.
>> Attempting to fetch from http://people.freebsd.org/~mbr/ooo/.
mozilla-vendor-1.0.2a.tgz 100% of 7292 B 44 kBps
===> Extracting for openoffice-1.1.1
>> Checksum OK for openoffice1.1/OOo_1.1.1p1_source.tar.bz2.
>> Checksum OK for openoffice1.1/gpc231.tar.Z.
>> Checksum OK for openoffice1.1/patch-openoffice-mozilla101-2002-10-14.
>> Checksum OK for openoffice1.1/mozilla-vendor-1.0.2a.tgz.
===> Extracting mozilla sub project
===> Vulnerability check disabled
>> mozilla-source-1.0.2.tar.bz2 doesn't seem to exist in
/usr/ports/distfiles/.
>> Attempting to fetch from
http://ftp.mozilla.org/pub/mozilla.org/mozilla/releases/mozilla1.0.2/src/.
mozilla-source-1.0.2.tar.bz2 100% of 28 MB 1712 kBps
00m00s
>> libart_lgpl-1.0.2.tar.bz2 doesn't seem to exist in
/usr/ports/distfiles/.
>> Attempting to fetch from
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/.
fetch:
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/libart_lgpl-1.0.2.tar.bz2: File unavailable (e.g., file not found, no access)
>> Attempting to fetch from
ftp://ftp.se.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/.
fetch:
ftp://ftp.se.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/libart_lgpl-1.0.2.tar.bz2: File unavailable (e.g., file not found, no access)
>> Attempting to fetch from
ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/.
fetch:
ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/libart_lgpl-1.0.2.tar.bz2: File unavailable (e.g., file not found, no access)
>> Attempting to fetch from
ftp://ftp.ru.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/.
fetch:
ftp://ftp.ru.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/libart_lgpl-1.0.2.tar.bz2: File unavailable (e.g., file not found, no access)
>> Attempting to fetch from
ftp://ftp.jp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/.
fetch:
ftp://ftp.jp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/libart_lgpl-1.0.2.tar.bz2: File unavailable (e.g., file not found, no access)
>> Attempting to fetch from
ftp://ftp.tw.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/.
fetch:
ftp://ftp.tw.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/marcus/libart_lgpl-1.0.2.tar.bz2: File unavailable (e.g., file not found, no access)
>> Attempting to fetch from
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/.
libart_lgpl-1.0.2.tar.bz2 100% of 95 kB 56 kBps
===> Extracting for mozilla-1.0.2_1
>> Checksum OK for mozilla-source-1.0.2.tar.bz2.
>> Checksum OK for libart_lgpl-1.0.2.tar.bz2.
===> Patching for openoffice-1.1.1
===> Applying FreeBSD patches for openoffice-1.1.1
===> Patching for mozilla-1.0.2_1
===> Applying FreeBSD patches for mozilla-1.0.2_1
===> Removing GIF LZW compression for openoffice-1.1.1
===> openoffice-1.1.1 depends on executable: gcc32 - not found
===> Verifying install for gcc32 in /usr/ports/lang/gcc32
===> gcc-3.2.3_1 is only for i386, and you are running amd64.
*** Error code 1
Stop in /usr/ports/lang/gcc32.
*** Error code 1
Stop in /usr/ports/editors/openoffice-1.1.
** Command failed [exit code 1]: /usr/bin/script -qa
/tmp/portinstall43979.0 make
** Fix the problem and try again.
** Listing the failed packages (*:skipped / !:failed)
! editors/openoffice-1.1 (unknown build error)
---> Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed
--- dmesg
FreeBSD jracine.maxwell.syr.edu 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Fri
Apr 9 15:39:47 EDT 2004
root@jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON amd64
[jracine@jracine jracine]$ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.2-CURRENT #0: Fri Apr 9 15:39:47 EDT 2004
root@jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8090b000.
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 248 (2205.01-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
real memory = 3674144768 (3503 MB)
avail memory = 3543220224 (3379 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
random: <entropy source, Software, Yarrow>
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [GIANT-LOCKED]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0:0:0: setting power state D0
pci0:7:0: setting power state D0
pci0:7:1: setting power state D0
pci0:7:3: setting power state D0
pci0:7:5: setting power state D0
pci0:10:1: setting power state D0
pci0:11:1: setting power state D0
pci0:24:0: setting power state D0
pci0:24:1: setting power state D0
pci0:24:2: setting power state D0
pci0:24:3: setting power state D0
pci0:25:0: setting power state D0
pci0:25:1: setting power state D0
pci0:25:2: setting power state D0
pci0:25:3: setting power state D0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1:0:0: setting power state D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2:0:0: setting power state D0
pci2:0:1: setting power state D0
pci2:6:0: setting power state D0
pci2:7:0: setting power state D0
pci2:7:1: setting power state D0
pci2:7:2: setting power state D0
ohci0: <OHCI (generic) USB controller> mem 0xfd8fe000-0xfd8fefff irq 19
at device 0.0 on pci2
ohci0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8fe000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfd8ff000-0xfd8fffff irq 19
at device 0.1 on pci2
ohci1: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8ff000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xfd8f8000-0xfd8fbfff,0xfd8fd800-0xfd8fdfff irq 18 at device 6.0 on pci2
fwohci0: Bus reserved 0x800 bytes for rid 0x10 type 3 at 0xfd8fd800
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:00:00:00:01:0e:f8
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:01:0e:f8
fwe0: Ethernet address: 02:00:00:01:0e:f8
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ohci2: <NEC uPD 9210 USB controller> mem 0xfd8f7000-0xfd8f7fff irq 19 at
device 7.0 on pci2
ohci2: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8f7000
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xfd8fc000-0xfd8fcfff irq 16 at
device 7.1 on pci2
ohci3: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8fc000
ohci3: [GIANT-LOCKED]
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci3
usb3: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 7.2 (no driver attached)
pci2: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER
pci2:7:2: setting power state D3
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf at device 7.1
on pci0
atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0:7:3: setting power state D3
pcm0: <AMD-8111> port 0xcc00-0xcc3f,0xc800-0xc8ff irq 17 at device 7.5
on pci0
pcm0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
pcm0: Bus reserved 0x40 bytes for rid 0x14 type 4 at 0xcc00
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC655 AC97 Codec>
pcib3: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3:3:0: setting power state D0
skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff mem
0xfd9fc000-0xfd9fffff irq 19 at device 3.0 on pci3
skc0: Bus reserved 0x4000 bytes for rid 0x10 type 3 at 0xfd9fc000
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
malloc() of "512" with the following non-sleepable locks held:
exclusive sleep mutex skc0 (network driver) r = 0 (0xffffff00d33ada70)
locked @ /usr/src/sys/pci/if_sk.c:1368
Stack backtrace:
witness_warn() at witness_warn+0x1a5
uma_zalloc_arg() at uma_zalloc_arg+0x6a
malloc() at malloc+0x9e
if_attach() at if_attach+0x21f
ether_ifattach() at ether_ifattach+0x27
sk_attach() at sk_attach+0x2e6
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
skc_attach() at skc_attach+0x30b
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_pci_attach() at acpi_pci_attach+0xed
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_pcib_attach() at acpi_pcib_attach+0xc7
acpi_pcib_pci_attach() at acpi_pcib_pci_attach+0x89
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_pci_attach() at acpi_pci_attach+0xed
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_pcib_attach() at acpi_pcib_attach+0xc7
acpi_pcib_acpi_attach() at acpi_pcib_acpi_attach+0xd3
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_probe_children() at acpi_probe_children+0x58
acpi_attach() at acpi_attach+0x52e
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
nexus_attach() at nexus_attach+0x17
device_probe_and_attach() at device_probe_and_attach+0xbe
root_bus_configure() at root_bus_configure+0x20
configure() at configure+0x1f
mi_startup() at mi_startup+0xaa
btext() at btext+0x2c
sk0: Ethernet address: 00:d0:68:03:d4:99
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
lock order reversal
1st 0xffffff00d33ada70 skc0 (network driver) @
/usr/src/sys/pci/if_sk.c:672
2nd 0xffffffff8078a220 kernel environment (kernel environment) @
/usr/src/sys/kern/kern_environment.c:288
Stack backtrace:
witness_checkorder() at witness_checkorder+0x4ac
_sx_slock() at _sx_slock+0x4d
getenv() at getenv+0x37
getenv_quad() at getenv_quad+0x13
getenv_int() at getenv_int+0x13
e1000phy_attach() at e1000phy_attach+0x24
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
miibus_attach() at miibus_attach+0x4b
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
mii_phy_probe() at mii_phy_probe+0xc4
sk_attach() at sk_attach+0x311
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
skc_attach() at skc_attach+0x30b
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_pci_attach() at acpi_pci_attach+0xed
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_pcib_attach() at acpi_pcib_attach+0xc7
acpi_pcib_pci_attach() at acpi_pcib_pci_attach+0x89
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_pci_attach() at acpi_pci_attach+0xed
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_pcib_attach() at acpi_pcib_attach+0xc7
acpi_pcib_acpi_attach() at acpi_pcib_acpi_attach+0xd3
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
acpi_probe_children() at acpi_probe_children+0x58
acpi_attach() at acpi_attach+0x52e
device_probe_and_attach() at device_probe_and_attach+0xbe
bus_generic_attach() at bus_generic_attach+0x18
nexus_attach() at nexus_attach+0x17
device_probe_and_attach() at device_probe_and_attach+0xbe
root_bus_configure() at root_bus_configure+0x20
configure() at configure+0x1f
mi_startup() at mi_startup+0xaa
btext() at btext+0x2c
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, autoskc0: [GIANT-LOCKED]
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver
attached)
pci0:10:1: setting power state D3
pcib4: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4:1:0: setting power state D0
twe0: <3ware 7000 series Storage Controller. Driver version 1.50.01.000>
port 0xbc00-0xbc0f mem 0xfe000000-0xfe7fffff irq 17 at device 1.0 on
pci4
twe0: Bus reserved 0x10 bytes for rid 0x10 type 4 at 0xbc00
twe0: [GIANT-LOCKED]
twe0: 4 ports, Firmware FE7S 1.05.00.063, BIOS BE7X 1.08.00.048
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver
attached)
pci0:11:1: setting power state D3
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0 on motherboard
cpu1 on motherboard
orm0: <Option ROMs> at iomem 0xcf800-0xd07ff,0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 0.976 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDRW <SAMSUNG CDRW/DVD SM-352B> at ata1-master PIO4
twed0: <Unit 0, TwinStor, Normal> on twe0
twed0: 70910MB (145224064 sectors)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/twed0s1a
lock order reversal
1st 0xffffff0001390860 filedesc structure (filedesc structure) @
/usr/src/sys/kern/sys_generic.c:902
2nd 0xffffffff8078ab00 Giant (Giant) @
/usr/src/sys/fs/specfs/spec_vnops.c:387
Stack backtrace:
witness_checkorder() at witness_checkorder+0x4ac
_mtx_lock_flags() at _mtx_lock_flags+0x3d
spec_poll() at spec_poll+0xd8
spec_vnoperate() at spec_vnoperate+0x14
vn_poll() at vn_poll+0x3c
selscan() at selscan+0x136
kern_select() at kern_select+0x31e
select() at select+0x37
syscall() at syscall+0x40e
Xfast_syscall() at Xfast_syscall+0xa8
--- syscall (93), rip = 0x201515720, rsp = 0x7fffffffe3c8, rbp =
0xffffffff ---
pid 662 (evolution-wombat), uid 1001: exited on signal 11 (core dumped)
pid 671 (evolution-wombat), uid 1001: exited on signal 11 (core dumped)
pid 630 (gnome-smproxy), uid 1001: exited on signal 10 (core dumped)
pid 36025 (evolution-wombat), uid 1001: exited on signal 11 (core
dumped)
pid 42624 (evolution-wombat), uid 1001: exited on signal 11 (core
dumped)
pid 42626 (evolution-wombat), uid 1001: exited on signal 11 (core
dumped)
-- uname -a
FreeBSD jracine.maxwell.syr.edu 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Fri
Apr 9 15:39:47 EDT 2004
root@jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON amd64
On Tue, 2004-04-13 at 08:35, Tilman Linneweh wrote:
> * Jeffrey Racine [Di, 13 Apr 2004 at 14:09 GMT]:
> > I have scoured newsgroups and the web, and have yet to come across any
> > mention of openoffice & amd64. Has anyone managed to get this running,
> > or is this somewhere in the future?
> >
> > By the way, thanks for the kind and helpful responses I have had on my
> > recent posts to this newsgroup. Sincerely appreciated, and my new system
> > is now humming along thanks to your help.
>
> Do you have a working jdk?
--
Professor J. S. Racine Phone: (315) 443-1630
Department of Economics FAX: (315) 443-1081
Syracuse University e-mail: jracine@maxwell.syr.edu
Syracuse, NY, USA 13244-1020
http://www.maxwell.syr.edu/econ/faculty/jeffrey_racine.htm
`The generation of random numbers is too important to be left to
chance.'
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1081862927.644.3.camel>