Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 21 Oct 2000 11:50:00 +0200
From:      "gbalda@libero.it" <gbalda@libero.it>
To:        stable@freebsd.org
Subject:   Problem RAID AMI
Message-ID:  <G2RXZC$IzjDQ79u0vRT8pglt7GZ0jYeVZAe4zluAJIswbdOYz@libero.it>

next in thread | raw e-mail | index | archive | help
HP LC3 2x18GB Mirrored
free bsd stable 4.1

No problem for the installations, but when i try to reboot or shutdown -
r
the server does not reboot
 
when i try shutdown -h now the system going down but I got this messages
 
system alted
amrd0 still open
can't shutdown


#################
...
amr0: <AMI MegaRAID> mem 0xfede0000-0xfedeffff irq 17 at device 9.1 on 
pci0
amr0: firmware \^B\^BF  bios \^A\^BB   16MB memory
amr0: s/g table too low (0x1000), reallocating
amrd0: <MegaRAID logical drive> on amr0
amrd0: 17365MB (35563520 sectors) RAID 1 (optimal)
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xf800-0xf8ff mem 
0xfedff000-0
edfffff irq 19 at device 10.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=3D7, 16/255 SCBs
ahc0: Host Adapter Bios disabled.  Using default SCSI device parameters
pci0: <Cirrus Logic GD5446 SVGA controller> at 13.0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on 
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
ata0-slave: ata_command: timeout waiting for intr
ata0-slave: identify failed
acd0: CDROM <CD-532E-B> at ata0-master using PIO4
Waiting 15 seconds for SCSI devices to settle
no devsw (majdev=3D0 bootdev=3D0xa0200000)
Mounting root from ufs:/dev/amrd0s1a




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?G2RXZC$IzjDQ79u0vRT8pglt7GZ0jYeVZAe4zluAJIswbdOYz>