Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 22 May 2020 11:12:03 +0200
From:      Charles <charlesr@scd-systems.net>
To:        freebsd-arm@freebsd.org
Subject:   Rock64 dwc interface issues
Message-ID:  <877d6e2d-6cd8-30f3-08c3-60a2bacb5873@scd-systems.net>

next in thread | raw e-mail | index | archive | help
Hi,


I am currently trying to setup my Rock64 V2.0 SoC with FreeBSD (Image: 
http://ftp.freebsd.org/pub/FreeBSD/snapshots/arm64/aarch64/ISO-IMAGES/13.0/FreeBSD-13.0-CURRENT-arm64-aarch64-ROCK64-20200514-r361019.img.xz)

The spi from the rock64 board is not flashed and the sd-card is booting 
successful FreeBSD.

But the dwc0 network interface makes trouble.

At first I tried to reach the soc by ssh without success, the connection 
ends into a timeout. Next i tried to reach the board by icmp requests 
from other machines and i only got approx. every 3-4 packets answered 
back from the rock.
The arp table from the rock64 machine is fine, same on the other side.

icmp outout:

# ping 192.168.178.79
PING 192.168.178.79 (192.168.178.79): 56 data bytes
64 bytes from 192.168.178.79: icmp_seq=3 ttl=64 time=0.422 ms
64 bytes from 192.168.178.79: icmp_seq=7 ttl=64 time=0.295 ms
64 bytes from 192.168.178.79: icmp_seq=8 ttl=64 time=0.284 ms
64 bytes from 192.168.178.79: icmp_seq=11 ttl=64 time=0.289 ms
64 bytes from 192.168.178.79: icmp_seq=12 ttl=64 time=0.282 ms

tcpdump dump from the rock:

# tcpdump -i dwc0 -n icmp
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on dwc0, link-type EN10MB (Ethernet), capture size 262144 bytes
01:24:30.275479 IP 192.168.178.21 > 192.168.178.79: ICMP echo request, 
id 20996, seq 0, length 64
01:24:31.286399 IP truncated-ip - 16384 bytes missing! 192.168.178.21 > 
192.168.242.79: ICMP echo request, id 20996, seq 4097, length 16448
01:24:33.400434 IP 192.168.178.21 > 192.168.178.79: ICMP echo request, 
id 20996, seq 3, length 64
01:24:33.400533 IP 192.168.178.79 > 192.168.178.21: ICMP echo reply, id 
20996, seq 3, length 64
01:24:34.460477 IP truncated-ip - 16384 bytes missing! 192.168.242.21 > 
192.168.178.79: ICMP echo request, id 20996, seq 4, length 16448
01:24:35.512486 IP 192.168.178.21 > 192.168.186.79: ICMP echo request, 
id 20996, seq 5, length 64
01:24:36.572512 IP truncated-ip - 16384 bytes missing! 192.168.178.21 > 
192.168.178.79: ICMP echo request, id 20996, seq 6, length 16448
01:24:37.632534 IP 192.168.178.21 > 192.168.178.79: ICMP echo request, 
id 20996, seq 7, length 64
01:24:37.632631 IP 192.168.178.79 > 192.168.178.21: ICMP echo reply, id 
20996, seq 7, length 64
01:24:38.688549 IP 192.168.178.21 > 192.168.178.79: ICMP echo request, 
id 20996, seq 8, length 64
01:24:38.688640 IP 192.168.178.79 > 192.168.178.21: ICMP echo reply, id 
20996, seq 8, length 64
01:24:39.709363 IP 192.168.178.21 > 192.168.178.79: ICMP echo request, 
id 20996, seq 9, length 64
01:24:40.711011 IP truncated-ip - 16384 bytes missing! 192.168.178.21 > 
192.168.178.79: ICMP echo request, id 20996, seq 10, length 16448
01:24:41.712351 IP 192.168.178.21 > 192.168.178.79: ICMP echo request, 
id 20996, seq 11, length 64
01:24:41.712449 IP 192.168.178.79 > 192.168.178.21: ICMP echo reply, id 
20996, seq 11, length 64
01:24:42.775589 IP 192.168.178.21 > 192.168.178.79: ICMP echo request, 
id 20996, seq 12, length 64
01:24:42.775677 IP 192.168.178.79 > 192.168.178.21: ICMP echo reply, id 
20996, seq 12, length 64


Output ifconfig:

dwc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
         options=80008<VLAN_MTU,LINKSTATE>
         ether 3a:6f:36:64:e6:9c
         inet 192.168.178.79 netmask 0xffffff00 broadcast 192.168.178.255
         media: Ethernet autoselect (1000baseT <full-duplex>)
         status: active
         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>

dmesg:

---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r361019: Thu May 14 09:26:15 UTC 2020
 
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC 
arm64
FreeBSD clang version 10.0.0 (git@github.com:llvm/llvm-project.git 
llvmorg-10.0.0-0-gd32170dbd5b)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module firmware already present!
KLD file umodem.ko is missing dependencies
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP fbf1b000 mode 2 pages 1
MAP fbf24000 mode 2 pages 1
MAP fbf27000 mode 2 pages 1
MAP fef30000 mode 2 pages 16
WARNING: Device "kbd" is Giant locked and may bware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofwbus0
rk_grf0: <RockChip General Register Files> mem 0xff100000-0xff100fff on 
ofwbus0
rk3328_cru0: <Rockchip RK3328 Clock and Reset Unit> mem 
0xff440000-0xff440fff on ofwbus0
rk3328_cru0: cannot get parent at idx 6
Cannot set frequency for clk: aclk_bus_pre, error: 34
rk3328_cru0: Failed to set aclk_bus_pre to a frequency of 15000000
Cannot set frequency for clk: aclk_peri_pre, error: 34
rk3328_cru0: Failed to set aclk_peri_pre to a frequency of 15000000
clk_fixed1: <Fixed clock> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 
0xff450000-0xff45ffff on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 
0xff811000-0xff811fff,0xff812000-0xff813fff,0xff8140s 160
rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
gpio0: <RockChip GPIO Bank controller> mem 0xff210000-0xff2100ff irq 52 
on rk_pinctrl0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <RockChip GPIO Bank controller> mem 0xff220000-0xff2200ff irq 53 
on rk_pinctrl0
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <RockChip GPIO Bank controller> mem 0xff230000-0xff2300ff irq 54 
on rk_pinctrl0
gpiobus2: <OFW GPIO bus> on gpio2
gpio3: <RockChip GPIO Bank controller> mem 0xff240000-0xff2400ff irq 55 
on rk_pinctrl0
gpiobus3: <OFW GPIO bus> on gpio3
rk_i2c0: <RockChip I2C> mem 0xff160000-0xff160fff irq 16 on ofwbus0
iicbus0: <OFW I2C bus> on rk_i2c0
rk805_pmu0: <RockChip RK805 PMIC> at addr 0x30 irq 56 on iicbus0
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
rk_tsadc0: <RockChip temperature sensors> mem 0xff250000-0xff2500ff irq 
22 on ofwbus0
cpuliseq_dt1: <Generic cpufreq driver> on cpu1
cpu2: <Open Firmware CPU> on cpulist0
cpufreq_dt2: <Generic cpufreq driver> on cpu2
cpu3: <Open Firmware CPU> on cpulist0
cpufreq_dt3: <Generic cpufreq driver> on cpu3
uart0: <16750 or compatible> mem 0xff130000-0xff1300ff irq 14 on ofwbus0
uart0: console (-1,n,8,1)
iic0: <I2C generic I/O> on iicbus0
rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller 
(RockChip)> mem 0xff500000-0xff503fff irq 41 on ofwbus0
rockchip_dwmmc0: Hardware version ID is 270a
mmc0: <MMC/SD bus> on rockchip_dwmmc0
rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller 
(RockChip)> mem 0xff520000-0xff523fff irq 43 on ofwbus0
rockchip_dwmmc1: Hardware version ID is 270a
mmc1: <MMC/SD bus> on rockchip_dwmmc1
dwc0: <Rockchip Gigabit Ethernet Controller> mem 0xff540000-0xff54ffff 
irq 44 on ofwbus0
miibus0: <MII bus> on dwc0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseT0baseTX-FDX, 
1000baseT-FDX, 1000baseT-FDX-master, auto
dwc0: Ethernet address: 3a:6f:36:64:e6:9c
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 
0xff580000-0xff5bffff irq 46 on ofwbus0
usbus0 on dwcotg0
ehci0: <Generic EHCI Controller> mem 0xff5c0000-0xff5cffff irq 47 on ofwbus0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci0: <Generic OHCI Controller> mem 0xff5d0000-0xff5dffff irq 48 on ofwbus0
usbus2 on ohci0
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <power> failed to map pin
gpioled0: <standby> failed to map pin
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
Obsolete code will be removed soon: random(9) is the obsolete 
Park-Miller LCG from 1988
ugen1.1: <Generic EHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Generiaddr 1> on usbus0
ugen2.1: <Generic OHCI root HUB> at usbus2
uhub2 on usbus2
uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
mmcsd0: 32GB <SDHC SL32G 8.0 SN 0C4A1E4B MFG 08/2016 by 3 SD> at mmc0 
50.0MHz/4bit/2048-block
mmc1: No compatible cards found on bus
Release APs...done
CPU  0: ARM Cortex-A53 r0p4 affinity:  0
                    Cache Type = <64 byte D-cacheline,64 byte 
I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
  Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
  Instruction Set Attributes 1 = <>
          Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
          Processor Features 1 = <>
       Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit 
ASID,1TB PA>
       Memory Model Features 1 = <8bit VMID>
       Memory Model Features 2 = <32bit CCIDX,48bit VA>
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
              Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 
Breakpoints,PMUv3,Debugv8>
              Debug FeatureCortex-A53 r0p4 affinity:  3
WARNING: WITNESS option enabled, expect reduced performance.
Warning: no time-of-day clock registered, system time will not be set 
accurately
uhub2: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
uhub0: 1 port with 1 removable, self powered
lo0: link state changed to UP
dwc0: link state changed to DOWN
dwc0: link state changed to UP


Does anyone know this issue ?


Best,

Charles



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?877d6e2d-6cd8-30f3-08c3-60a2bacb5873>