Skip site navigation (1)Skip section navigation (2)
From:      a.ponnampalam@utoronto.ca
To:        freebsd-stable@freebsd.org
Subject:   synchronous transfers vs. asynchronous transfers
Message-ID:  <Pine.GSO.3.96.990705155432.5352G-100000@log3.in.utoronto.ca>

next in thread | raw e-mail | index | archive | help
Hi,

I just recently used CVS to move from 3.2 release to 3.2 stable and i get
this message:
  "ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers"

any idea why i would get this for a stable build? i basically followed the
steps listed in
http://www.nothing-going-on.demon.co.uk/FreeBSD/make-world/make-world.html
1. get new files
2. make buildworld
3. make insallworld
4. recompile kernel
5. upgrade new files in /etc...

This is my dmesg:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.2-STABLE #16: Mon Jul  5 00:11:19 EDT 1999
    root@fantasia:/usr/src/sys/compile/FANTASIA
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 199432705 Hz
CPU: Pentium Pro (199.43-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x617  Stepping=7
  Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 100663296 (98304K bytes)
avail memory = 94908416 (92684K bytes)
Preloaded elf kernel "kernel" at 0xc02ca000.
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on
pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
ed1: <NE2000 PCI Ethernet (ProLAN)> rev 0x00 int a irq 11 on pci0.8.0
ed1: address 00:20:78:17:8b:f1, type NE2000 (16 bit)
vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 10 on
pci0.9.0
ahc0: <Adaptec aic7850 SCSI adapter> rev 0x01 int a irq 12 on pci0.10.0
ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs
es1: <AudioPCI ES1370> rev 0x00 int a irq 5 on pci0.11.0
pcm1: using I/O space register mapping at 0x6300
Probing for PnP devices:
CSN 1 Vendor ID: INT1030 [0x3010d425] Serial 0x00ba5ea3 Comp ID: @@@0000
[0x00000000]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0: 1.44MB 3.5in
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <JTS Corp. CHAMP Model C2000-3AF>
wd2: 1910MB (3913056 sectors), 3882 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 1 (atapi): <E285X/1.02>, removable, dma, iordis
acd0: drive speed 1367KB/sec, 240KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
ex0 at 0x210-0x21f irq 9 on isa
ex0: Intel EtherExpress Pro/10, address 00:aa:00:ba:5e:a3, connector TPE
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xb0ffb0ff on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL ST3.2A>, LBA, DMA, 32-bit,
multi-block-16
wd0: 3079MB (6306048 sectors), 782 cyls, 128 heads, 63 S/T, 512 B/S
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
IP Filter: initialized.  Default = pass all, Logging = disabled
ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers
ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers
ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers
ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers
ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers
ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers
ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers
ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers
changing root device to wd0s3a
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <YAMAHA CRW4260 1.0h> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
ffs_mountfs: superblock updated for soft updates



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.3.96.990705155432.5352G-100000>