Date: Wed, 25 Oct 2000 19:37:16 -0500 From: David Kelly <dkelly@hiwaay.net> To: Soren Schmidt <sos@freebsd.dk> Cc: Thierry.Herbelot@alcatel.fr, stable@FreeBSD.ORG Subject: Re: IDE drives to avoid ? [was : Re: ATA problems (rehashed)] Message-ID: <200010260037.e9Q0bGS54307@grumpy.dyndns.org> In-Reply-To: Message from Soren Schmidt <sos@freebsd.dk> of "Wed, 25 Oct 2000 10:15:30 %2B0200." <200010250815.KAA41239@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
Soren Schmidt writes: > The only drives I can recommed are IBM's, but beware the new DTLA serie= s > are so fast that some old controllers can have problems with them. Ditto. This is a system which has me reconsidering the wisdom of SCSI = for my needs: CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x673 Stepping =3D 3 Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC= A,CMOV,PAT, PSE36,MMX,FXSR,XMM> real memory =3D 134201344 (131056K bytes) avail memory =3D 127221760 (124240K bytes) [...] ad0: 14649MB <IBM-DTLA-307015> [29765/16/63] at ata0-master using UDMA33 Have seen bonnie report over 22 MB/sec on that drive and system. Then again this second one is almost sad enough to be funny. OTOH it is reliable: FreeBSD 3.5-STABLE #1: Thu Aug 31 10:35:57 CDT 2000 [...] CPU: AMD Am5x86 Write-Back (486-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x4f4 Stepping =3D 4 Features=3D0x1<FPU> [...] chip0: <Host to PCI bridge (vendor=3D1060 device=3D8881)> rev 0x04 on pci= 0.16.0 chip1: <PCI to ISA bridge (vendor=3D1060 device=3D886a)> rev 0x0e on pci0= =2E18.0 ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x10 on pci0.18.1 [...] wdc0 at 0x1f0-0x1f7 irq 14 flags 0xd0ffd0ff on isa wdc0: unit 0 (wd0): <IBM-DTLA-307015>, LBA, 32-bit, multi-block-16, sleep= -hack wd0: 14649MB (30003120 sectors), 1867 cyls, 255 heads, 63 S/T, 512 B/S > And as always I'm interested in reports/patches to the driver to make > as many drives/controllers work proberly. Well, last I tried RELENG_4 on the above 5x86 it tried to do busmaster = on the IDE interface but timed out and fell back to polled mode. That = was better than the first time I tried 4.0-R and it blew up. Later read = there was a conflict between ISA ed0 and the new ata code. Splurged on = the purchase of a DEC 21140 based 10/100 PCI card for $12 and cured = that problem. If you say it might work now (its a UMC chipset) then = I'll give it a shot. -- David Kelly N4HHE, dkelly@hiwaay.net =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D The human mind ordinarily operates at only ten percent of its capacity -- the rest is overhead for the operating system. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200010260037.e9Q0bGS54307>