Date: Wed, 5 Mar 1997 20:10:58 +0300 (MSK) From: "Maxim A. Bolotin" <max@rnd.runnet.ru> To: Stefan Esser <se@freebsd.org> Cc: hackers@freebsd.org Subject: Re: Acer ALTOS 7000 instalation problem. Message-ID: <Pine.BSF.3.95q.970305200817.466C-100000@altos.rnd.runnet.ru> In-Reply-To: <19970304204305.GY21094@x14.mi.uni-koeln.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 4 Mar 1997, Stefan Esser wrote:
> Please try, whether the following patch stops PCI being found
> on your EISA-only system ...
>
> I'd appreciate receiving verbose boot messages, independently
> of whether the problem is fixed by this patch.
OK,
there're :
FreeBSD 2.2-970215-GAMMA #2: Wed Mar 5 11:45:41 MSK 1997
max@altos.rnd.runnet.ru:/usr/src/sys/compile/ALTOS
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 66667614 Hz, i8254 clock: 1193167 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
CPU: Pentium (66.67-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x515 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30470144 (29756K bytes)
eisa0: <ACR1a01 (System Board)>
Probing for devices on the EISA bus
ahc0: <Adaptec aic7770 SCSI host adapter> at 0x9c00-0x9cff irq 11
ahc0: on eisa0 slot 9
ahc0: Using Level Sensitive Interrupts
ahc0: aic7770 <= Rev C, Twin Channel, A SCSI Id=7, B SCSI Id=7, 4 SCBs
ahc0: Reseting Channel B
ahc0: Reseting Channel A
ahc0: Downloading Sequencer Program...Done
ahc0: Probing channel A
ahc0 waiting for scsi devices to settle
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
(ahc0:0:0): "MICROP 4110-09NB_Nov18F TN0F" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 1002MB (2053880 512 byte sectors)
sd0(ahc0:0:0): with 2428 cyls, 9 heads, and an average 93 sectors/track
---skiped.
cd0(ahc0:5:0): CD-ROM can't get the size
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x81000800
pcibus_setup(2): mode 2 enable port (0x0cf8) is 0x00
pcibus_setup(2a): mode2res=0x0e (0x0e)
pcibus_setup(2a): now trying mechanism 2
pcibus_check: device 0 1 2 3 [class=32046] 4 5 6 7 [class=32046] 8 9 10 11 [class=32046] 12 13 14 15 [class=32046] -- nothing found
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <6 virtual consoles, flags=0x0>
...
Max.
-
Rostov State University Computer Center
Rostov-on-Don, +7 (8632) 285794 or 357476
Russia, RUNNet max@run.net.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95q.970305200817.466C-100000>