Date: Fri, 25 Oct 1996 19:37:49 -0400 (EDT) From: Ken Lam <klam@sumter.awod.com> To: current@freebsd.org, scsi@freebsd.org Subject: current and 2940 lockup during boot Message-ID: <199610252337.TAA14205@sumter.awod.com>
next in thread | raw e-mail | index | archive | help
I just cvsupped Justin's tweaks and rebuilt.
During the bootup process, it probes my first 3 devices (2 hds, 1 jazz drive)
then locks up with a white cursor and fails to probe the 4th (a toshiba
cdrom).
My configuration is a
P5-90/Neptune chipset
3c509
AHA2940U
FreeBSD is on my scsi drives
I have tagged queuing enabled. I am planning to disable that to
determine if that is causing my problems.
FYI for those adventure some users :)
---
below is my normal boot (actually, booting from a slightly older
kernel than my last sup 3 days ago which worked as well)
FreeBSD 2.2-CURRENT #0: Wed Sep 18 11:16:53 EDT 1996
lam@tsunami.awod.com:/mnt/tmp/src/sys/compile/KL3
Calibrating clock(s) relative to mc146818A clock...
i586 clock: 90211713 Hz, i8254 clock: 1193279 Hz
CPU: Pentium (90.20-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x521 Stepping=1
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 31510528 (30772K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82434NX (Neptune) PCI cache memory controller> rev 17 on pci0:0
chip1 <Intel 82378ZB PCI-ISA bridge> rev 3 on pci0:2
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:6
ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
ahc0: target 0 Tagged Queuing Device
(ahc0:0:0): "SEAGATE ST31200N 9410" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 1006MB (2061108 512 byte sectors)
(ahc0:2:0): "MAXTOR LXT-340S 6.57" type 0 fixed SCSI 1
sd1(ahc0:2:0): Direct-Access 324MB (665154 512 byte sectors)
ahc0: target 3 Tagged Queuing Device
(ahc0:3:0): "iomega jaz 1GB H.62" type 0 removable SCSI 2
sd2(ahc0:3:0): Direct-Access
sd2(ahc0:3:0): ILLEGAL REQUEST asc:24,0 Invalid field in CDB
sd2 could not mode sense (4). Using ficticious geometry
sd2(ahc0:3:0): NOT READY asc:3a,0 Medium not present
sd2: could not get size
0MB (0 512 byte sectors)
(ahc0:4:0): "TOSHIBA CD-ROM XM-5201TA 3014" type 5 removable SCSI 2
cd0(ahc0:4:0): CD-ROM
cd0(ahc0:4:0): NOT READY asc:3a,0 Medium not present
can't get the size
vga0 <VGA-compatible display device> rev 1 on pci0:14
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC2700H>
wd0: 696MB (1427328 sectors), 1416 cyls, 16 heads, 63 S/T, 512 B/S
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: aui/utp/bnc[*BNC*] address 00:a0:24:00:fe:a6
npx0 on motherboard
npx0: INT 16 interface
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199610252337.TAA14205>