Date: Wed, 2 Oct 1996 12:22:41 -0500 (CDT) From: Matt Rosenberg <matt@server.wulaw.wustl.edu> To: questions@freebsd.org, scsi@freebsd.org Cc: gibbs@freefall.freebsd.org, se@zpr.uni-koeln.de Subject: 2.2 -- COMPAQ / PCI Message-ID: <Pine.NEB.3.95.961002121031.898A-100000@server.wulaw.wustl.edu>
next in thread | raw e-mail | index | archive | help
More problems with COMPAQ and the PCI bus. I tried installing the latest version (2.2-960801SNAP) to try and solve the problem, but on the probe of the PCI bus on my COMPAQ ProLiant 5000 it fails to find any of the PCI devices other than the chipset and also shows the wrong amount of memory. COMPAQ ProLiant 5000 Adaptec 2940UW 3Com PCI EtherLink 10/100 card from the boot disk kernel for 2.2: avail memory = 13496320 (13180K) eisa0: <CPQ1561 (System Board)> Probing for devices on the EISA bus Probing for devices on PCI bus 0: chip0 <Intel 82375EB PCI-EISA bridge> rev 21 on pci0:15:0 pci0:20 Intel Corporation, device = 0x84c5, class = memory (ram) [no driver assigned] chip1 <generic PCI bridge (vendor = 8086 device = 84c4 subclass = 0)> rev 4 on pci0:25 chip2 <generic PCI bridge (vendor = 8086 device = 84c4 subclass = 0)> rev 4 on pci0:26 and then it goes on to the ISA devices. My current FreeBSD system is in desparate need of upgrade, and I don't want to have to migrate to another flavor of UNIX. Hints? Suggestions? ========================================================== Matt Rosenberg Washington University School of Law matt@www.wulaw.wustl.edu http://www.wulaw.wustl.edu/~matt ==========================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.3.95.961002121031.898A-100000>