Date: Sun, 10 Nov 1996 15:07:38 +1000 From: "Vladimir P. Frolov" <pvp@fareast.rosprint.ru> To: scsi@freebsd.org Subject: SCSI problem Message-ID: <3285631A.167EB0E7@fareast.rosprint.ru>
next in thread | raw e-mail | index | archive | help
Every night (after several hours of inactivity )
there are some errors on my SCSI subsytem.
environment:
FreeBSD 2.1.5
IWIll P55TU with Adaptec 7880 (2940 UW)
enable disconnection for HDD - no
termination: Low-Off/ High-On
IBM HDD: DFRSS2W (wide SCSI drive) connected to wide connector
autostart - on
D TI SY - on
TERM PWR EN - on
TOSHIBA SCSI-2 CD-ROM connected to 50pin connector
terminated via pluged terminators
syslog:
-------
sd0(ahc0:0:0): timed out in command phase, SCSISIGI == 0x4
sd0(ahc0:0:0): asserted ATN - device reset in message buffer
sd0(ahc0:0:0): timed out in dataout phase, SCSISIGI == 0x0
ahc0: Issued Channel A Bus Reset #1. 2 SCBs aborted
sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
sd0(ahc0:0:0): Power on, reset, or bus device reset occurred
, retries:3
swap_pager: I/O error - pagein failed; blkno 11152, size 8192, error 5
vm_fault: pager input (probably hardware) error, PID 92 failure
sd0(ahcsd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:3
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:2
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:2
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:1
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:1
sd0(ahc0:0sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:4
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:3
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:2
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:1
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, FAILURE
swap_pager: I/O error - pagein failed; blkno 11152, size 8192, error 5
vm_fault: pager input (probably hardware) error, PID 92 failure
:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, FAILURE
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, FAILURE
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:4
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:4
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:3
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:3
0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:4
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:4
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:30:0): Logical unit is in process of becoming ready
, retries:4
sd0(ahc0:0:0): NOT READY asc:4,1
sd0(ahc0:0:0): Logical unit is in process of becoming ready
, retries:3
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3285631A.167EB0E7>