Date: Thu, 23 May 2002 17:49:34 -0700 From: Doug Hardie <bc979@lafn.org> To: "M. Warner Losh" <imp@village.org> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Wireless PCCard Message-ID: <f051003cbb9133e4e6562@[10.0.1.90]> In-Reply-To: <20020523.111034.81894321.imp@village.org> References: <20020522182851.A72285@xor.obsecurity.org> <1022132370.68108.1.camel@lobster.originative.co.uk> <f051003b3b9123dfa04fc@[10.0.1.90]> <20020523.111034.81894321.imp@village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
That was it. The IRQ it was using wasn't in use (at least not recorded as such), but switching to 11 fixed it. Thanks. At 11:10 -0600 5/23/02, M. Warner Losh wrote: >In message: <f051003b3b9123dfa04fc@[10.0.1.90]> > Doug Hardie <bc979@lafn.org> writes: >: I am trying to get a Farallon Skyline 11 card to work with 4.3. I >: must be doing something wrong as the card works in other machines. >: When I boot up the laptop with the card installed, nothing is shown >: by ifconfig for it. When I insert it while the system is up, then >: wi0 shows up but cannot be configured. When trying to set the IP >: address I get some buffer cannot be allocated messages and the system >: hangs. > >This is the classic "can't allocate an interrupt" or "you are sharing >an interrupt that cannot be shared" bug. Pick a different interrupt >for wi0. > >Warner -- -- Doug To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f051003cbb9133e4e6562>