Date: Sat, 9 Oct 1999 06:57:47 -0400 (EDT) From: "Brian F. Feldman" <green@FreeBSD.org> To: Poul-Henning Kamp <phk@critter.freebsd.dk> Cc: "Daniel C. Sobral" <dcs@newsguy.com>, current@FreeBSD.org Subject: Re: maxphys = 0?? Message-ID: <Pine.BSF.4.10.9910090652560.59818-100000@janus.syracuse.net> In-Reply-To: <9903.939453575@critter.freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 9 Oct 1999, Poul-Henning Kamp wrote: > Well, there are two options, either your sources are not up to date, > or your config is very special in some way... I am absolutely certain that my sources are up-to-date. I'll attach my kernel config in case you can find something special there. > > -- > Poul-Henning Kamp FreeBSD coreteam member > phk@FreeBSD.ORG "Real hackers run -current on their laptop." > FreeBSD -- It will take a long time before progress goes too far! > -- Brian Fundakowski Feldman \ FreeBSD: The Power to Serve! / green@FreeBSD.org `------------------------------' # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.102 1998/01/11 02:16:38 jkh Exp $ machine i386 cpu I586_CPU ident GREEN maxusers 64 makeoptions DEBUG="-g" #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options IPX options NETATALK options FFS #Berkeley Fast Filesystem options FFS_ROOT options CD9660 #ISO 9660 Filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options NO_F00F_HACK options IPFIREWALL options IPFIREWALL_FORWARD #enable xparent proxy support options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPDIVERT options IPSTEALTH #options IPFILTER options DUMMYNET options DDB options DDB_UNATTENDED options SOFTUPDATES options PQ_HUGECACHE # color for 1024k cache options ICMP_BANDLIM options MSGBUF_SIZE=16384 options INVARIANTS options INVARIANT_SUPPORT options CLK_USE_TSC_CALIBRATION #options ICMP_BANDLIM_SILENT options CPU_WT_ALLOC options NO_MEMORY_HOLE options MAXFILES=65536 controller pci0 at nexus? controller isa0 at nexus? controller pnp0 # Luigi's snd code. # You may also wish to enable the pnp controller with this, for pnp # sound cards. # #device pcm0 at isa? port 0x220 irq 5 drq 1 #flags 0x16 controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 device sbxvi0 at isa? drq 6 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 device joy0 at isa? port IO_GAME #controller fdc0 at isa? port IO_FD1 irq 6 drq 2 #disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 # for a PCI only system (most modern machines) controller ata0 device atadisk0 # ATA disks device atapicd0 # ATAPI CDROM's device atapist0 # ATAPI tapes device atapifd0 controller ncr0 controller scbus0 #base SCSI code device ch0 #SCSI media changers device da0 #SCSI direct access devices (aka disks) device sa0 #SCSI tapes device cd0 #SCSI CD-ROMs device pass0 #CAM passthrough driver device pt0 at scbus? # SCSI processor type options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device # The keyboard controller; it controlls the keyboard and the PS/2 mouse. controller atkbdc0 at isa? port IO_KBD # The AT keyboard device atkbd0 at atkbdc? irq 1 # PS/2 mouse device psm0 at atkbdc? irq 12 # The video card driver. device vga0 at isa? port ? conflicts # The syscons console driver (sco color console compatible). device sc0 at isa? device npx0 at nexus? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # #device apm0 at nexus? conflicts # Advanced Power Management # System Management Bus! controller smbus0 controller alpm0 device smb0 at smbus? device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 3 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? device pps0 at ppbus? controller ppc0 at isa? port ? irq 7 drq 3 # USB support # UHCI controller #controller uhci0 # OHCI controller controller ohci0 # General USB code (mandatory for USB) controller usb0 pseudo-device loop pseudo-device ether #pseudo-device sl 2 #pseudo-device ppp 2 #pseudo-device tun 4 pseudo-device pty #pseudo-device gzip # Exec gzipped a.out's pseudo-device speaker pseudo-device snp 4 pseudo-device bpf 4 #Berkeley packet filter pseudo-device splash pseudo-device md # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)" options SHMMAXPGS=8200 options SYSVSHM options SYSVSEM options SYSVMSG options USER_LDT #allow user-level control of i386 ldt options P1003_1B options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9910090652560.59818-100000>