Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 4 Mar 2002 04:30:01 -0800 (PST)
From:      "Oliver Blasnik" <oliver.blasnik@nextra.de>
To:        freebsd-bugs@FreeBSD.org
Subject:   Re: kern/35425: System hang while boot on specific SMP motherboard
Message-ID:  <200203041230.g24CU1p54210@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/35425; it has been noted by GNATS.

From: "Oliver Blasnik" <oliver.blasnik@nextra.de>
To: <freebsd-gnats-submit@freebsd.org>,
	"Oliver Blasnik" <oliver.blasnik@nextra.de>
Cc:  
Subject: Re: kern/35425: System hang while boot on specific SMP motherboard
Date: Mon, 4 Mar 2002 13:20:24 +0100

 Hm. I forgot to add the MPTable output... Ups... ;)
 
 ===============================================================================
 
 MPTable, version 2.0.15
 
 -------------------------------------------------------------------------------
 
 MP Floating Pointer Structure:
 
   location:                     BIOS
   physical address:             0x000f7ac0
   signature:                    '_MP_'
   length:                       16 bytes
   version:                      1.4
   checksum:                     0x0b
   mode:                         Virtual Wire
 
 -------------------------------------------------------------------------------
 
 MP Config Table Header:
 
   physical address:             0x0009fc90
   signature:                    'PCMP'
   base table length:            308
   version:                      1.4
   checksum:                     0xdd
   OEM ID:                       'Gateway'
   Product ID:                   '7450R      '
   OEM table pointer:            0x00000000
   OEM table size:               0
   entry count:                  30
   local APIC address:           0xfee00000
   extended table length:        140
   extended table checksum:      103
 
 -------------------------------------------------------------------------------
 
 MP Config Base Table Entries:
 
 --
 Processors:     APIC ID Version State           Family  Model   Step    Flags
                  1       0x11    BSP, usable     6       8       10      0x383fbff
                  0       0x11    AP, usable      6       8       10      0x383fbff
 --
 Bus:            Bus ID  Type
                  0       PCI   
                  1       PCI   
                  2       ISA   
 --
 I/O APICs:      APIC ID Version State           Address
                  2       0x11    usable          0xfec00000
                  3       0x11    usable          0xfec01000
 --
 I/O Ints:       Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#
                 INT     active-hi        edge        2     0          2    0
                 INT     active-hi        edge        2     1          2    1
                 INT     active-hi        edge        2     2          2    2
                 INT     active-hi        edge        2     3          2    3
                 INT     active-hi        edge        2     4          2    4
                 INT     active-lo       level        2     5          2    5
                 INT     active-hi        edge        2     6          2    6
                 INT     active-lo       level        2     7          2    7
                 INT     active-hi        edge        2     8          2    8
                 INT     active-lo       level        2     9          2    9
                 INT     active-lo       level        2    10          2   10
                 INT     active-lo       level        2    11          2   11
                 INT     active-hi        edge        2    12          2   12
                 INT     active-hi        edge        2    13          2   13
                 INT     active-hi        edge        2    14          2   14
                 INT     active-hi        edge        2    15          2   15
                 INT     active-lo       level        0   7:A          3    4
                 INT     active-lo       level        0   9:A          3    5
                 INT     active-lo       level        0  11:A          3    8
                 INT     active-lo       level        0  12:A          3    9
                 INT     active-lo       level        0  15:A          2    9
 --
 Local Ints:     Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN#
                 ExtINT  active-hi        edge        2     0        255    0
                 NMI     active-hi        edge        0   0:A        255    1
 
 -------------------------------------------------------------------------------
 
 MP Config Extended Table Entries:
 
 --
 System Address Space
  bus ID: 0 address type: I/O address
  address base: 0x0
  address range: 0x10000
 --
 System Address Space
  bus ID: 0 address type: memory address
  address base: 0x10000000
  address range: 0xeee00000
 --
 System Address Space
  bus ID: 0 address type: memory address
  address base: 0xfee01000
  address range: 0x11ff000
 --
 System Address Space
  bus ID: 0 address type: memory address
  address base: 0xa0000
  address range: 0x20000
 --
 System Address Space
  bus ID: 0 address type: memory address
  address base: 0xd0000
  address range: 0x10000
 --
 Bus Heirarchy
  bus ID: 2 bus info: 0x01 parent bus ID: 0
 --
 Compatibility Bus Address
  bus ID: 0 address modifier: add
  predefined range: 0x00000000
 --
 Compatibility Bus Address
  bus ID: 0 address modifier: add
  predefined range: 0x00000001
 --
 Compatibility Bus Address
  bus ID: 1 address modifier: subtract
  predefined range: 0x00000000
 --
 Compatibility Bus Address
  bus ID: 1 address modifier: subtract
  predefined range: 0x00000001
 
 ===============================================================================
 
 

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200203041230.g24CU1p54210>