Date: Sun, 9 Aug 2009 15:19:44 +0100 From: chris scott <kraduk@googlemail.com> To: Hans Petter Selasky <hselasky@c2i.net>, freebsd-current@freebsd.org Subject: Re: usb pen drive detection - still no joy Message-ID: <d36406630908090719t3482dff3r72ae4194517e2a77@mail.gmail.com> In-Reply-To: <200908060915.37155.hselasky@c2i.net> References: <d36406630908041405q4637dfb6wd28ec31e8ebb8a3f@mail.gmail.com> <200908051022.45347.hselasky@c2i.net> <d36406630908051417p70cc2341q98a985e2183c5016@mail.gmail.com> <200908060915.37155.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
2009/8/6 Hans Petter Selasky <hselasky@c2i.net> > On Wednesday 05 August 2009 23:17:12 chris scott wrote: > > will play around with setting tomorrow > > Find out at exactly which value your device stops working, and which of the > values is critical. > > --HPS > I had a good play around with those values but no joy 8( I took the delay from fairly low (25 ms) right through to 1000ms but it didn't help. I also ranged the continue from 2- 24ms I did however manage to find the psu for a usb2 hub i had. When i plu the device into the powered hub it works. However iff i pull the power plug on the usb hub everything disconnects. I have another non powered usb hub and thats still seen ugen4.2: <vendor 0x1a40> at usbus4 uhub5: <vendor 0x1a40 product 0x0101, class 9/0, rev 2.00/1.11, addr 2> on usbus4 uhub5: 4 ports with 4 removable, self powered ugen4.3: <vendor 0x1a40> at usbus4 uhub6: <vendor 0x1a40 product 0x0101, class 9/0, rev 2.00/1.11, addr 3> on usbus4 uhub6: 4 ports with 4 removable, self powered ugen4.4: <Corsair> at usbus4 umass0: <Corsair Flash Voyager, class 0/0, rev 2.00/11.00, addr 4> on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Corsair Flash Voyager 1100> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 3840MB (7864320 512 byte sectors: 255H 63S/T 489C) GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. GEOM: ufsid/4a6383ef48125a83: partition 1 does not start on a track boundary. GEOM: ufsid/4a6383ef48125a83: partition 1 does not end on a track boundary. GEOM: ufs/uroot: partition 1 does not start on a track boundary. GEOM: ufs/uroot: partition 1 does not end on a track boundary. ugen4.2: <vendor 0x1a40> at usbus4 (disconnected) uhub5: at uhub2, port 2, addr 2 (disconnected) (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry ugen4.3: <vendor 0x1a40> at usbus4 (disconnected) ugen4.4: <Corsair> at usbus4 (disconnected)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d36406630908090719t3482dff3r72ae4194517e2a77>