Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 25 Jun 2018 20:59:08 +0000
From:      Grzegorz Junka <list1@gjunka.com>
To:        freebsd-net@freebsd.org
Subject:   Re: Killer E2500 network driver
Message-ID:  <5d37763f-5cd1-ca42-e1f9-18e4804845ae@gjunka.com>
In-Reply-To: <20180625150015.GC51569@FreeBSD.org>
References:  <d80c6445-a2d8-d04e-de56-9b3ee5d605a8@gjunka.com> <201806251431.w5PEVrZl098861@pdx.rh.CN85.dnsmgr.net> <20180625150015.GC51569@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On 25/06/2018 15:00, Glen Barber wrote:
> On Mon, Jun 25, 2018 at 07:31:53AM -0700, Rodney W. Grimes wrote:
>>> On 24/06/2018 22:29, Rodney W. Grimes wrote:
>>>>> On 24/06/2018 17:16, Rodney W. Grimes wrote:
>>>>>>> Hi All,
>>>>>>>
>>>>>>> This list states that 10-Stable supports Killer E2500 Gigabit Ethernet
>>>>>>> controller:
>>>>>>>
>>>>>>> https://www.freebsd.org/relnotes/10-STABLE/hardware/support.html
>>>>>>>
>>>>>>> However, similar list for 11-Stable doesn't list that driver:
>>>>>>>
>>>>>>> https://www.freebsd.org/relnotes/11-STABLE/hardware/support.html
>>>>>>>
>>>>>>> Does it mean that the driver has been removed, and if yes then why?
>>>>>> I believe it was a "added" feature in 10 stable, my 11 stable
>>>>>> alc(4) man page lists the E2500 as supported.
>>>>>>
>>>>>>         The alc device driver provides support for the following Ethernet
>>>>>>         controllers:
>>>>>>
>>>>>>         o   Atheros AR8131 PCI Express Gigabit Ethernet controller
>>>>>>         o   Atheros AR8132 PCI Express Fast Ethernet controller
>>>>>>         o   Atheros AR8151 v1.0 PCI Express Gigabit Ethernet controller
>>>>>>         o   Atheros AR8151 v2.0 PCI Express Gigabit Ethernet controller
>>>>>>         o   Atheros AR8152 v1.1 PCI Express Fast Ethernet controller
>>>>>>         o   Atheros AR8152 v2.0 PCI Express Fast Ethernet controller
>>>>>>         o   Atheros AR8161 PCI Express Gigabit Ethernet controller
>>>>>>         o   Atheros AR8162 PCI Express Fast Ethernet controller
>>>>>>         o   Atheros AR8171 PCI Express Gigabit Ethernet controller
>>>>>>         o   Atheros AR8172 PCI Express Fast Ethernet controller
>>>>>>         o   Killer E2200 Gigabit Ethernet controller
>>>>>>         o   Killer E2400 Gigabit Ethernet controller
>>>>>>         o   Killer E2500 Gigabit Ethernet controller
>>>>>>
>>>>> Yeah, listing drivers in alc shows support for that card. But the whole
>>>>> alc driver isn't listed on the hardware support page for 11-Stable. So
>>>>> wanted to check if it's an omission or it was removed deliberately.
>>>> Which page are you looking at, it needs fixed.
>>>>
>>>> @x230a:/ # ls -lag /boot/kernel/if_alc.ko
>>>> -r-xr-xr-x  1 root  wheel  84912 Jul 21  2017 /boot/kernel/if_alc.ko
>>>> @x230a:/ # uname -UK
>>>> 1101001 1101001
>>>>
>>> The one listed in my email:
>>>
>>> https://www.freebsd.org/relnotes/11-STABLE/hardware/support.html
>>>
>>> alc(4) isn't listed there.
>> Thank you, I should of reread the whole of the message before I
>> asked you to repeat your self.
>>
>> I have checked the 11.0R 11.1R release notes at:
>> https://www.freebsd.org/releases/11.0R/relnotes.html
>> https://www.freebsd.org/releases/11.1R/relnotes.html
>>
>> and the infact do list alc(4) correctly, so I have sent an internal
>> mail to Release Engineering so that we can track down why the
>> release notes at
>> https://www.freebsd.org/relnotes/11-STABLE/hardware/support.html
>> are not reflecting this.
>>
>> I suspect this happened in a transition that recently occured
>> to the repository location that the release notes are stored in/
>> generated from.
>>
> For 11.x, no, this is not the case.  That change was only in 12-CURRENT,
> and was not retroactively applied to stable branches due to a problem
> that is outstanding with the hardware page generation for 12.
>
> That said, I'll try to track down where exactly this driver went missing
> from the hardware page, but it is too late to fix it for the 11.2
> release.  It can be noted in an errata entry, however, and a link to the
> 11-STABLE page once it is fixed there.
>
> Glen
>
Great, thanks Glen and Rodney. Am I then to understand that this is a 
documentation issue, rather than the actual driver being removed?




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5d37763f-5cd1-ca42-e1f9-18e4804845ae>