Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 01 Aug 1998 11:35:04 -0700
From:      Parag Patel <parag@cgt.com>
To:        current@FreeBSD.ORG
Subject:   Netatalk name-registering problem with -current
Message-ID:  <199808011835.LAA00561@pinhead.parag.codegen.com>

next in thread | raw e-mail | index | archive | help

I'm having some trouble with netatalk which works fine under -stable but appears to not work correctly under -current (at least for me).

I recently added a second PII processor and another 128Mb RAM (total 256Mb), and upgraded to -current so I could turn on SMP and softupdates.  This much went fine, and most of the old binaries work too.  (I had to rebuild some ports that accessed /var/run/utmp but otherwise the machine is running fine.)  The machine has one SMC DEC ethernet card.

Anyway, I rebuilt and reinstalled netatalk just to be sure.  I also made sure I have the latest sources for both -current and netatalk (as well as its port) as of last night (July 31).

atalkd runs and appears to be happy.  I verified that the patches for -current (mentioned earlier on the mailing list) were indeed installed correctly.  For some reason no servers appear to be able to register any names:

$ nbprgstr -p 4 pinhead:Workstation
nbp_rgstr: Operation timed out
Can't register pinhead:Workstation@*
$ nbplkup
                 HP LaserJet 5P:SNMP Agent                         65281.245:8
                 HP LaserJet 5P:LaserWriter                        65281.245:158
$

That's all that's on my local network right now as the Macs are turned off.

The afpd and papd daemons also get timeouts trying to register and fail to start up.  nbplkup works though, and netstat shows this, if it helps:

AppleTalk:
Destination        Gateway            Flags     Refs     Use     Netif Expire
0                  0.0                U           0        0      lo0 =>
0-32767            65280.253          U           0        0      de0
32768-49151        65280.253          U           0        0      de0
49152-57343        65280.253          U           0        0      de0
57344-61439        65280.253          U           0        0      de0
61440-63487        65280.253          U           0        0      de0
63488-64511        65280.253          U           0        0      de0
64512-65023        65280.253          U           0        0      de0
65024-65279        65280.253          U           0        0      de0
65280-65407        65280.253          U           0        0      de0
65280.253          0.0                UH          0        0      de0
65408-65471        65280.253          U           0        0      de0
65472-65503        65280.253          U           0        0      de0
65504-65519        65280.253          U           0        0      de0
65520-65527        65280.253          U           0        0      de0
65528-65531        65280.253          U           0        0      de0
65532-65533        65280.253          U           0        0      de0


I would like to know if anyone is running netatalk on the latest -current and if anyone has seen a problem like this, or if I'm on the bleeding edge and get to debug it myself.  I don't think it's a configuration problem since I blew away the auto-created /usr/local/etc/atalk.conf, but it didn't make any difference.

Thanks in advance!  (dmesg output appended below if it is of any help)


	-- Parag Patel


Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #5: Fri Jul 31 23:06:22 PDT 1998
    root@pinhead.parag.codegen.com:/usr/src/sys/compile/PINHEAD
Timecounter "i8254"  frequency 1193182 Hz  cost 3044 ns
CPU: Pentium II (686-class CPU)
  Origin = "GenuineIntel"  Id = 0x634  Stepping=4
  Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 268435456 (262144K bytes)
avail memory = 258527232 (252468K bytes)
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.4.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.4.1
chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 12 on pci0.4.2
chip4: <Intel 82371AB Power management controller> rev 0x01 on pci0.4.3
ahc0: <Adaptec aic7880 Ultra SCSI host adapter> rev 0x00 int a irq 19 on pci0.6.0
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <IBM DCAS-34330W S65A> type 0 fixed SCSI 2
sd0: Direct-Access 4134MB (8467200 512 byte sectors)
ahc0:A:1: refuses WIDE negotiation.  Using 8bit transfers
sd1 at scbus0 target 1 lun 0
sd1: <QUANTUM FIREBALL_TM3200S 300N> type 0 fixed SCSI 2
sd1: Direct-Access 3067MB (6281856 512 byte sectors)
de0: <Digital 21140 Fast Ethernet> rev 0x12 int a irq 17 on pci0.11.0
de0: SMC 9332DST 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:c0:7e:df:e4
de0: enabling 10baseT port
Probing for devices on PCI bus 1:
vga0: <Matrox model 051f graphics accelerator> rev 0x00 int a irq 16 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL00e4 [0xe4008c0e] Serial 0x08de2f0a
pcm1 (SB16pnp <SB16 PnP> sn 0x08de2f0a) at 0x220-0x22f irq 10 drq 1 flags 0x15 on isa
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
pcm0 not probed due to drq conflict with pcm1 at 1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
sio3 at 0x2e8-0x2ef irq 9 on isa
sio3: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 at 0x278-0x27f on isa
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <TOSHIBA CD-ROM XM-6202B/1108>, removable, accel, ovlap, dma, iordis
wcd0: 5512Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
joy0 at 0x201 on isa
joy0: joystick
joy1 not probed due to I/O address conflict with joy0 at 0x201
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
changing root device to sd0s2a
SMP: AP CPU #1 Launched!
ffs_mountfs: superblock updated
ffs_mountfs: superblock updated



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199808011835.LAA00561>