Date: Tue, 16 Sep 2014 10:44:53 -0700 From: Sean Bruno <sbruno@ignoranthack.me> To: Ian Lepore <ian@FreeBSD.org> Cc: freebsd-arch <freebsd-arch@freebsd.org> Subject: Re: Total confusion over toolchain/xdev behavior [redux] Message-ID: <1410889493.10088.11.camel@bruno> In-Reply-To: <1410888044.66615.7.camel@revolution.hippie.lan> References: <1404688077.1059.115.camel@bruno> <1410883593.10088.9.camel@bruno> <1410888044.66615.7.camel@revolution.hippie.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 2014-09-16 at 11:20 -0600, Ian Lepore wrote: > On Tue, 2014-09-16 at 09:06 -0700, Sean Bruno wrote: > > On Sun, 2014-07-06 at 16:07 -0700, Sean Bruno wrote: > > > Objective: install an xcompile toolchain into a jail for use by > > > poudriere during arm/mips/sparc/power ports pkgs builds. The build > > > should be possible from a non-root user. > > > > We've had a lot of success using Warner's native-xtools target to build > > a toolchain inserted into a native armv6 chroot, emulated via > > qemu-bsd-user with the binmisc image activator handling things for us. > > > > I've run into, what appears to be, a tool chain setup problem that I > > don't quite grok. I suspect, we are not setting up the amd64-clang > > toolchain inserted into the jail correctly. I.e. we are using an > > external toolchain here, that is amd64 binaries configured to output > > armv6 (all clang). > > > > I have identified a list of several ports (probably 40 or 50) that seem > > to have the same failure case when "linking". Some are hidden by > > "configure" while most fail the same way. In general it looks like > > this: > > > > rm -f bltwish25 > > /nxb-bin/usr/bin/cc -Wall -fPIC -O -pipe -I/usr/local/include/tcl8.6/generic -I/usr/local/include/tk8.6/generic -I/usr/local/include/tk8.6/unix -DUSE_INTERP_RESULT -DUSE_INTERP_ERRORLINE -I.. -I./.. -I./../.. -I/usr/local/include -I/usr/local/include/tk8.6 -I/usr/local/include/tcl8.6 -o bltwish25 \ > > ./../bltUnixMain.c libBLT25.so -L/usr/local/lib -ltk86 -ltcl86 -LNONE -lX11 -L/usr/local/lib -ljpeg -lm > > /nxb-bin/usr/bin/ld: bltwish25: hidden symbol `__aeabi_memcpy' in /usr/lib/libgcc.a(aeabi_memcpy.o) is referenced by DSO > > /nxb-bin/usr/bin/ld: final link failed: Nonrepresentable section on output > > cc: error: linker command failed with exit code 1 (use -v to see invocation) > > gmake[3]: *** [bltwish25] Error 1 > > > > full build log: > > http://chips.ysv.freebsd.org/data/11armv632-default/2014-09-04_01h04m05s/logs/errors/blt-2.5.3_2.log > > > > It looks like this might be the fix for the problem. Unfortunately, at > least parts of it are gpl3... > > https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=151568 > > -- Ian > > ok, I'll give it a try here. However, do I need different changes for config.gcc than are displayed in the file? sean
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1410889493.10088.11.camel>