Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 18 Jul 2007 23:26:33 +0200
From:      "Uffe R. B. Andersen" <urb@twe.net>
To:        freebsd-stable <freebsd-stable@freebsd.org>
Subject:   SCSI error during boot
Message-ID:  <469E8589.8060105@twe.net>

next in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi

When I boot my FreeBSD 6.2-RELEASE-p6, I get the following error:

(pass0:ahc0:0:0:0): Vendor Specific Command. CDB: 85 8 e 0 0 0 1 0 0 0 0
0 0 0 e c 0
(pass0:ahc0:0:0:0): CAM Status: SCSI Status Error
(pass0:ahc0:0:0:0): SCSI Status: Check Condition
(pass0:ahc0:0:0:0): ILLEGAL REQUEST asc:20,0
(pass0:ahc0:0:0:0): Invalid command operation code: Command byte 0 is
invalid
(pass0:ahc0:0:0:0): Vendor Specific Command. CDB: 85 8 e 0 0 0 1 0 0 0 0
0 0 0 a 1 0
(pass0:ahc0:0:0:0): CAM Status: SCSI Status Error
(pass0:ahc0:0:0:0): SCSI Status: Check Condition
(pass0:ahc0:0:0:0): ILLEGAL REQUEST asc:20,0
(pass0:ahc0:0:0:0): Invalid command operation code: Command byte 0 is
invalid

camcontrol gives this output:
pass0: <QUANTUM ATLAS_V_18_WLS 0230> Fixed Direct Access SCSI-3 device
pass0: Serial Number 141014450327
pass0: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged
Queueing Enabled

dmesg regarding the controller:
ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0x8800-0x88ff mem
0xdb000000-0xdb000fff irq 16 at device 12.0 on pci0
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

smartctl shows no errors on the disk, but this error occur:
(pass0:ahc0:0:0:0): MODE SENSE(06). CDB: 1a 0 19 0 40 0
(pass0:ahc0:0:0:0): CAM Status: SCSI Status Error
(pass0:ahc0:0:0:0): SCSI Status: Check Condition
(pass0:ahc0:0:0:0): ILLEGAL REQUEST asc:24,0
(pass0:ahc0:0:0:0): Invalid field in CDB: Command byte 2 is invalid

I tried booting the server on a Fedora 7 Live cd, ran smartctl and got
no error, so I assume the error is in the FreeBSD drivers.

How do I proceed, to get a fix for this problem?

- --
Med venlig hilsen - Sincerely
Uffe R. B. Andersen - mailto:urb@twe.net
http://www.twe.net/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (MingW32)

iD8DBQFGnoWJxC95nUQcrpgRAoE9AJ9VPpWjtx1dZgbXWzjJORhE2TTYSwCZAZGz
E6Nr9QBx2DtznuOxJ7Xl1tk=
=kY06
-----END PGP SIGNATURE-----



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?469E8589.8060105>