Date: Thu, 17 Dec 1998 18:22:41 +0100 (CET) From: Didier Derny <didier@omnix.net> To: se@freebsd.org Cc: hackers@freebsd.org, Stefan Esser <se@mi.uni-koeln.de>, didier@aida.org Subject: Re: Adaptec ANA 6944A TX and/or PCI problem Message-ID: <Pine.BSF.3.96.981217181604.7024B-100000@omnix.net> In-Reply-To: <19981213124334.B564@mi.uni-koeln.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 13 Dec 1998, Stefan Esser wrote: > > This can be verified by looking at the map registers (address 0x10 > to 0x24 in PCI config space, have to check which one is correct for > the port map of the DEC Ethernet chip). But this information should > also be provided by the verbose boot ... > > > I ran the adaptec diagnostics, he saw two boards effectively, > > he saw the same io ports at the same adresses 0xc800, 0xc400... > > The boards can be distinguished in PCI config space (geographical > addressing) no matter, what their map registers are set to. > > Did you try with memory mapped registers (kernel build option, see > the driver sources, remove the definition of TULIP_IOMAPPED, the > comment most probably applies to anxient PCI bridges ... > I've not been able to try it I'll have to wait until January result of boot -v sorry, the beginning is missing PCI bus 1: Probing for devices on PCI bus 2: found-> vendor=0x1011, dev=0x0009, revid=0x22 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[0]: type 4, range 32, base 0000c800, size 7 map[1]: type 1, range 32, base e3000000, size 7 de0: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 11 on pci2.4.0 de0: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de0: address 00:00:d1:1b:e3:e0 bpf: de0 attached found-> vendor=0x1011, dev=0x0009, revid=0x22 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[0]: type 4, range 32, base 0000c400, size 7 map[1]: type 1, range 32, base e2800000, size 7 de1: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 10 on pci2.5.0 de1: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de1: address 00:00:d1:1b:e3:e1 bpf: de1 attached found-> vendor=0x1011, dev=0x0009, revid=0x22 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[0]: type 4, range 32, base 0000c000, size 7 map[1]: type 1, range 32, base e2000000, size 7 de2: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 12 on pci2.6.0 de2: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de2: address 00:00:d1:1b:e3:e2 bpf: de2 attached found-> vendor=0x1011, dev=0x0009, revid=0x22 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=15 map[0]: type 4, range 32, base 0000b800, size 7 map[1]: type 1, range 32, base e1800000, size 7 de3: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 15 on pci2.7.0 de3: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de3: address 00:00:d1:1b:e3:e3 bpf: de3 attached Probing for devices on PCI bus 3: found-> vendor=0x1011, dev=0x0009, revid=0x22 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[0]: type 4, range 32, base 0000a800, size 7 map[1]: type 1, range 32, base e1000000, size 7 de4: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 10 on pci3.4.0 de4: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de4: address 00:00:d1:1b:e9:ae bpf: de4 attached found-> vendor=0x1011, dev=0x0009, revid=0x22 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[0]: type 4, range 32, base 0000a400, size 7 map[1]: type 1, range 32, base e0800000, size 7 de5: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 12 on pci3.5.0 de5: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de5: address 00:00:d1:1b:e9:af bpf: de5 attached found-> vendor=0x1011, dev=0x0009, revid=0x22 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=15 map[0]: type 4, range 32, base 0000a000, size 7 map[1]: type 1, range 32, base e0000000, size 7 de6: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 15 on pci3.6.0 de6: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de6: address 00:00:d1:1b:e9:b0 bpf: de6 attached found-> vendor=0x1011, dev=0x0009, revid=0x22 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[0]: type 4, range 32, base 00009800, size 7 map[1]: type 1, range 32, base df800000, size 7 de7: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 11 on pci3.7.0 de7: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2 de7: address 00:00:d1:1b:e9:b1 bpf: de7 attached -- Didier Derny didier@omnix.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.981217181604.7024B-100000>