Date: Wed, 05 Jul 2017 14:30:51 -0600 From: Ian Lepore <ian@freebsd.org> To: Yoshiro MIHIRA <sanpei.ml@gmail.com>, freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: HummingBoard-i2 does not boot from install image Message-ID: <1499286651.4402.40.camel@freebsd.org> In-Reply-To: <CALwmBx3O2Ovc%2B2ixGxoY5CFLe96M1C5tJeLMMR5vO=%2B=HTHSkw@mail.gmail.com> References: <CALwmBx3O2Ovc%2B2ixGxoY5CFLe96M1C5tJeLMMR5vO=%2B=HTHSkw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 2017-07-05 at 12:01 +0000, Yoshiro MIHIRA wrote: > I have HummingBoard-i2 and I could not boot 12.0-CURRENT boot image. > Please let me know to boot 12.0-CURRENT with HummingBoard. > > I tested > FreeBSD-12.0-CURRENT-arm-armv6-CUBOX-HUMMINGBOARD-20170619- > r320095.img > > And it does not boot up with below message[NG]. > > U-Boot SPL 2017.01-rc3 (Jun 13 2017 - 02:16:03) > SPL: Unsupported Boot Device! > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > > I have a old image > as FreeBSD-11.0-STABLE-arm-armv6-CUBOX-HUMMINGBOARD-20161221- > r310359.img > it can boot[OK]. > > Consoles: U-Boot console > Compatible U-Boot API signature found @0x4f7708a8 > > FreeBSD/armv6 U-Boot loader, Revision 1.2 > (root@releng2.nyi.freebsd.org, Wed Dec 21 18:14:05 UTC 2016) > > DRAM: 1024MB > Number of U-Boot devices: 2 > U-Boot env: loaderdev='mmc 0' > Found U-Boot device: disk > Checking unit=0 slice=<auto> partition=<auto>... good. > Booting from disk0s2a: > /boot/kernel/kernel data=0x6ec964+0x14b69c > syms=[0x4+0x7cef0+0x4+0x90376] > > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel] in 4 seconds... > > Thanks > Yoshiro MIHIRA I just downloaded that same 20170619 image and it boots fine on my Cubox, but its build date/time are different: U-Boot SPL 2017.01-rc3 (Jun 19 2017 - 20:54:45) I don't have a hummingboard to test, but u-boot has always been able to use the same image to boot a cubox and a hummingboard. -- Ian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1499286651.4402.40.camel>