Date: Sun, 21 Apr 2019 19:14:25 +0200 From: Bernd Walter <ticso@cicely7.cicely.de> To: Peter Jeremy <peter@rulingia.com> Cc: ticso@cicely.de, freebsd-arm@freebsd.org, Bernd Walter <ticso@cicely7.cicely.de> Subject: Re: no dev.cpu on RPI-B Message-ID: <20190421171425.GB18788@cicely7.cicely.de> In-Reply-To: <20190416094811.GA78331@server.rulingia.com> References: <20190409223917.GK69855@cicely7.cicely.de> <20190409235929.GA8974@server.rulingia.com> <20190410003508.GL69855@cicely7.cicely.de> <20190411202803.GA38343@cicely7.cicely.de> <20190416094811.GA78331@server.rulingia.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Apr 16, 2019 at 07:48:11PM +1000, Peter Jeremy wrote: > On 2019-Apr-11 22:28:03 +0200, Bernd Walter <ticso@cicely7.cicely.de> wrote: > >Much better, but still no temperature: > >[52]matrix# sysctl dev.cpu > >dev.cpu.0.%parent: cpulist0 > >dev.cpu.0.%pnpinfo: name=cpu@0 compat=arm,1176jzf-s > >dev.cpu.0.%location: > >dev.cpu.0.%driver: cpu > >dev.cpu.0.%desc: Open Firmware CPU > >dev.cpu.%parent: > > > >Will take a deeper look into it and compare to the previous FDT once I > >find time. > > I did some digging and found that I'd missed a required patch to > bcm2835_cpufreq which I've just committed as r346265. Sorry about that. Perfect: [48]matrix# sysctl dev.cpu dev.cpu.0.temperature: 33.6C dev.cpu.0.freq_levels: 700/-1 600/-1 500/-1 400/-1 300/-1 dev.cpu.0.freq: 700 dev.cpu.0.%parent: cpulist0 dev.cpu.0.%pnpinfo: name=cpu@0 compat=arm,1176jzf-s dev.cpu.0.%location: dev.cpu.0.%driver: cpu dev.cpu.0.%desc: Open Firmware CPU dev.cpu.%parent: Thank you -- B.Walter <bernd@bwct.de> http://www.bwct.de Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20190421171425.GB18788>