Date: Tue, 7 Mar 2000 12:12:27 -0800 (PST) From: Christopher Nielsen <cnielsen@pobox.com> To: Sheldon Hearn <sheldonh@uunet.co.za> Cc: cnielsen@pobox.com, current@FreeBSD.ORG Subject: Re: Getty/Init weirdness Message-ID: <14533.25259.297488.968412@ender.scient.com> In-Reply-To: <98237.952458176@axl.ops.uunet.co.za> References: <14532.38179.208634.408231@ender.scient.com> <98237.952458176@axl.ops.uunet.co.za>
next in thread | previous in thread | raw e-mail | index | archive | help
>>>>> "Sheldon" == Sheldon Hearn <sheldonh@uunet.co.za> writes:
Sheldon> You should probably show us your /etc/ttys, not your
Sheldon> kernel config. :-)
Doh! I meant to do that. :-)
See below.
Sheldon> Also, have a look in /var/log/messages for error messages
Sheldon> from getty(8).
No error messages from getty, but I also forgot to include that I
turned on maximum debugging for the syscons driver. I'm attaching my
dmesg output, too.
--- Begin dmesg output ---
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #24: Mon Mar 6 20:41:55 PST 2000
root@ender.scient.com:/usr/src/sys/compile/ENDER
Calibrating clock(s) ... TSC clock: 297766253 Hz, i8254 clock: 1193106 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 133169152 (130048K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0034d000 - 0x07ef5fff, 129667072 bytes (31657 pages)
sc0: releasing kbd0
sc0: kbd_release returned 0
sc0: kbd != NULL!, index:0, unit:0, flags:0x150000
sc0: keyboard 0
sc0: kbd index:0, unit:0, flags:0x350000
avail memory = 120524800 (117700K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry = f0000:e724 Rev = 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
ACPI: 000fd6e0
Preloaded elf kernel "kernel" at 0xc0334000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 40000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x104c, dev=0xac1d, revid=0x00
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=4 secondarybus=2
intpin=a, irq=255
map[10]: type 1, range 32, base 50102000, size 12
found-> vendor=0x104c, dev=0xac1d, revid=0x00
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=7 secondarybus=5
intpin=b, irq=255
map[10]: type 1, range 32, base 50101000, size 12
found-> vendor=0x1013, dev=0x6001, revid=0x01
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000fcf0, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=255
map[20]: type 1, range 32, base 00008400, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 0000efa0, size 4
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x1023, dev=0x939a, revid=0xf3
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 70800000, size 23
map[14]: type 1, range 32, base 71000000, size 17
map[18]: type 1, range 32, base 70000000, size 23
pci1: <PCI bus> on pcib1
pci1: <Trident model 939a VGA-compatible display device> (vendor=0x1023, dev=0x939a) at 0.0
pcic-pci0: <TI PCI-1251 PCI-CardBus Bridge> mem 0x50102000-0x50102fff at device 2.0 on pci0
PCI Config space:
00: ac1d104c 02100007 06070000 0082a808
10: 50102000 020000a0 b0040200 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c001ff
40: 00eb1014 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00449060 00000000 01818148 fba97543
90: 606283c0 00000000 00000000 00000000
Cardbus Socket registers:
00: 0000000f: 00000000: 30000510: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 83 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pcic-pci1: <TI PCI-1251 PCI-CardBus Bridge> mem 0x50101000-0x50101fff at device 2.1 on pci0
PCI Config space:
00: ac1d104c 02100007 06070000 0082a808
10: 50101000 020000a0 b0070500 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c002ff
40: 00eb1014 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00449060 00000000 01818148 fba97543
90: 606282c0 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000000: 00000000: 30000306: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 83 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
csa0: <Crystal Semiconductor CS4610/4611 Audio accelerator> irq 0 at device 6.0 on pci0
device_probe_and_attach: csa0 attach returned 6
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
ata1: mask=03 status0=50 status1=01
ata1: mask=03 status0=00 status1=01
ata1: devices = 0x4
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f at device 7.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0xefa0-0xefaf at device 7.3 on pci0
pnpbios: 23 devices, largest 980 bytes
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 00x4
PNP0000: start dependant
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: start dependant
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 00x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: start dependant
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x73, size=0x4, align=0x1
PNP0b00: start dependant
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: start dependant
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0303: adding irq mask 00x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: start dependant
pnpbios: handle 5 device ID PNP0303 (0303d041)
IBM3780: adding irq mask 0x1000
IBM3780: start dependant
pnpbios: handle 6 device ID IBM3780 (80374d24)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: start dependant
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x80
PNP0700: adding dma mask 0x4
PNP0700: start dependant
pnpbios: handle 8 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: start dependant
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x22-0x22, size=0x1, align=0
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0
PNP0c02: adding io range 0xef00-0xefaf, size=0xb0, align=0
PNP0c02: adding memory range 0-0x9ffff, size=0xa0000
PNP0c02: adding memory range 0xf0000-0xfffff, size=0x10000
PNP0c02: adding memory range 0x100000-0x7ffffff, size=0x7f00000
PNP0c02: adding memory range 0xffff0000-0xffffffff, size=0x10000
PNP0c02: start dependant
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37b, size=0x4, align=0
PNP0400: start dependant
pnpbios: handle 11 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: start dependant
pnpbios: handle 13 device ID PNP0501 (0105d041)
CSC0100: adding io range 0x530-0x537, size=0x8, align=0
CSC0100: adding io range 0x388-0x38b, size=0x4, align=0
CSC0100: adding io range 0x220-0x233, size=0x14, align=0x20
CSC0100: adding irq mask 0x400
CSC0100: adding dma mask 0x2
CSC0100: adding dma mask 0x1
CSC0100: start dependant
pnpbios: handle 14 device ID CSC0100 (0001630e)
CSC0110: adding io range 0x538-0x53f, size=0x8, align=0
CSC0110: start dependant
pnpbios: handle 15 device ID CSC0110 (1001630e)
CSC0101: adding io range 0-0xffffffff, size=0, align=0
CSC0101: start dependant
pnpbios: handle 16 device ID CSC0101 (0101630e)
CSC0103: adding io range 0x330-0x333, size=0x4, align=0x10
CSC0103: adding irq mask 0x800
CSC0103: start dependant
pnpbios: handle 17 device ID CSC0103 (0301630e)
IBM3765: adding io range 0-0xffffffff, size=0, align=0
IBM3765: adding io range 0-0xffffffff, size=0, align=0
IBM3765: adding irq mask 0000
IBM3765: adding irq mask 0000
IBM3765: adding dma mask 00
IBM3765: start dependant
pnpbios: handle 18 device ID IBM3765 (65374d24)
IBM0071: adding irq mask 0000
IBM0071: adding io range 0-0xffffffff, size=0, align=0x1
IBM0071: adding dma mask 00
IBM0071: start dependant
pnpbios: handle 19 device ID IBM0071 (71004d24)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
PNP0e03: start dependant
pnpbios: handle 20 device ID PNP0e03 (030ed041)
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0
PNP0680: adding io range 0x3f6-0x3f7, size=0x2, align=0
PNP0680: adding io range 0xfcf0-0xfcf7, size=0x8, align=0
PNP0680: start dependant
pnpbios: handle 23 device ID PNP0680 (8006d041)
PNP0680: adding irq mask 0x8000
PNP0680: adding io range 0x170-0x177, size=0x8, align=0
PNP0680: adding io range 0x376-0x376, size=0x1, align=0
PNP0680: adding io range 0xfcf8-0xfcff, size=0x8, align=0
PNP0680: start dependant
pnpbios: handle 25 device ID PNP0680 (8006d041)
PNP0c02: adding io range 0x2100-0x217f, size=0x80, align=0
PNP0c02: adding io range 0x2180-0x21ff, size=0x80, align=0
PNP0c02: skipping empty range
PNP0c02: start dependant
pnpbios: handle 27 device ID PNP0c02 (020cd041)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 8 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> flags 0x2 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x2, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: status 10 00 64
psm: data 08 00 00
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 04 b0 9c ce 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 04 b0 9c ce 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: releasing kbd0
sc0: kbd_release returned 0
sc0: kbd != NULL!, index:0, unit:0, flags:0x1d0000
sc0: keyboard 0
sc0: kbd index:0, unit:0, flags:0x3d0000
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic: management irq 3
pcic0: <Intel i82365> at irq 3 on isa0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0: irq maps: 0x49 0x59 0x49 0x49
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: parallel port found at 0x378
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
isa_probe_children: probing PnP devices
unknown: <PNP0000> can't assign resources
unknown0: <PNP0200> at port 0-0xf,0x80-0x8f,0xc0-0xdf drq 4 on isa0
unknown1: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown: <PNP0b00> can't assign resources
unknown: <PNP0800> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <IBM3780> can't assign resources
unknown2: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown: <PNP0700> can't assign resources
unknown3: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown4: <PNP0c02> at port 0x22,0x2e-0x2f,0x92,0xb2-0xb3,0x4d0-0x4d1,0x15e0-0x15ef,0xef00-0xefaf iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x7ffffff,0xffff0000-0xffffffff on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0501> can't assign resources
pcm0: <CS423x-PCI> at port 0x530-0x537,0x388-0x38b,0x220-0x233 irq 10 drq 1,0 on isa0
pcm: setmap 30000, ff00; 0xc8574000 -> 30000
pcm: setmap 40000, ff00; 0xc8584000 -> 40000
unknown5: <CSC0110> at port 0x538-0x53f on isa0
unknown6: <CSC0101> at port 0x10 on isa0
unknown7: <CSC0103> at port 0x330-0x333 irq 11 on isa0
unknown: <IBM3765> can't assign resources
unknown: <IBM0071> can't assign resources
unknown8: <PNP0e03> at port 0x3e0-0x3e1 on isa0
unknown: <PNP0680> can't assign resources
unknown: <PNP0680> can't assign resources
unknown9: <PNP0c02> at port 0x2100-0x217f,0x2180-0x21ff on isa0
BIOS Geometries:
0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: faith0 attached
IPsec: Initialized Security Association Processing.
ata0-master: success setting up UDMA2 mode on PIIX4 chip
ad0: <IBM-DYLA-28100/YSAIA22H> ATA-3 disk at ata0 as master
ad0: 7815MB (16006410 sectors), 16938 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
Creating DISK wd0
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting up PIO4 mode on generic chip
acd0: <MATSHITADVD-ROM SR-8171/067B> DVD-ROM drive at ata1 as master
acd0: read 3437KB/s (3437KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA, DVD-ROM, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0a
pccard: card inserted, slot 0
ad0s1: type 0xa5, start 0, end = 16006409, size 16006410 : OK
start_init: trying /sbin/init
scopen: dev:12,255, unit:0, vty:255
Linux-ELF exec handler installed
pcic: I/O win 0 flags 17 240-24f
pcic: I/O win 0 flags 7 240-24f
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 9 slot 0 on pccard0
pcic: I/O win 0 flags 17 240-24f
ep0: Ethernet address 00:10:4b:de:51:8c
ep0: supplying EUI64: 00:10:4b:ff:fe:de:51:8c
bpf: ep0 attached
svr4 ELF exec handler installed
scopen: dev:12,0, unit:0, vty:0
ep0: starting DAD for fe80:0007::0210:4bff:fede:518c
sc0: scclose(), done.
scopen: dev:12,0, unit:0, vty:0
sc0: scclose(), done.
scopen: dev:12,1, unit:0, vty:1
sc0: scclose(), done.
scopen: dev:12,2, unit:0, vty:2
sc0: scclose(), done.
scopen: dev:12,3, unit:0, vty:3
sc0: scclose(), done.
scopen: dev:12,4, unit:0, vty:4
sc0: scclose(), done.
scopen: dev:12,5, unit:0, vty:5
ep0: DAD complete for fe80:0007::0210:4bff:fede:518c - no duplicates found
--- End dmesg output ---
--- Begin /etc/ttys ---
#
# $FreeBSD: src/etc/etc.i386/ttys,v 1.6 1999/08/27 23:23:57 peter Exp $
# @(#)ttys 5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs. Common entries for the
# various columns include:
#
# name The name of the terminal device.
#
# getty The program to start running on the terminal. Typically a
# getty program, as the name implies. Other common entries
# include none, when no getty is needed, and xdm, to start the
# X Window System.
#
# type The initial terminal type for this port. For hardwired
# terminal lines, this will contain the type of terminal used.
# For virtual consoles, the correct type is cons25. Other
# common values include network for network connections on
# pseudo-terminals, dialup for incoming modem ports, and unknown
# when the terminal type cannot be predetermined.
#
# status Must be on or off. If on, init will run the getty program on
# the specified port. If the word "secure" appears, this tty
# allows root login.
#
# name getty type status comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console none unknown off insecure
#
ttyv0 "/usr/libexec/getty Pc" cons25 on secure
# Virtual terminals
ttyv1 "/usr/libexec/getty Pc" cons25 on insecure
ttyv2 "/usr/libexec/getty Pc" cons25 on insecure
ttyv3 "/usr/libexec/getty Pc" cons25 on insecure
ttyv4 "/usr/libexec/getty Pc" cons25 on insecure
ttyv5 "/usr/libexec/getty Pc" cons25 on insecure
ttyv6 "/usr/libexec/getty Pc" cons25 on insecure
ttyv7 "/usr/libexec/getty Pc" cons25 on insecure
ttyv8 "/usr/X11R6/bin/xdm -nodaemon" xterm on insecure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyd0 "/usr/libexec/getty std.9600" dialup off secure
ttyd1 "/usr/libexec/getty std.9600" dialup off secure
ttyd2 "/usr/libexec/getty std.9600" dialup off secure
ttyd3 "/usr/libexec/getty std.9600" dialup off secure
# Pseudo terminals
ttyp0 none network
ttyp1 none network
ttyp2 none network
ttyp3 none network
ttyp4 none network
ttyp5 none network
ttyp6 none network
ttyp7 none network
ttyp8 none network
ttyp9 none network
ttypa none network
ttypb none network
ttypc none network
ttypd none network
ttype none network
ttypf none network
ttypg none network
ttyph none network
ttypi none network
ttypj none network
ttypk none network
ttypl none network
ttypm none network
ttypn none network
ttypo none network
ttypp none network
ttypq none network
ttypr none network
ttyps none network
ttypt none network
ttypu none network
ttypv none network
ttyq0 none network
ttyq1 none network
ttyq2 none network
ttyq3 none network
ttyq4 none network
ttyq5 none network
ttyq6 none network
ttyq7 none network
ttyq8 none network
ttyq9 none network
ttyqa none network
ttyqb none network
ttyqc none network
ttyqd none network
ttyqe none network
ttyqf none network
ttyqg none network
ttyqh none network
ttyqi none network
ttyqj none network
ttyqk none network
ttyql none network
ttyqm none network
ttyqn none network
ttyqo none network
ttyqp none network
ttyqq none network
ttyqr none network
ttyqs none network
ttyqt none network
ttyqu none network
ttyqv none network
ttyr0 none network
ttyr1 none network
ttyr2 none network
ttyr3 none network
ttyr4 none network
ttyr5 none network
ttyr6 none network
ttyr7 none network
ttyr8 none network
ttyr9 none network
ttyra none network
ttyrb none network
ttyrc none network
ttyrd none network
ttyre none network
ttyrf none network
ttyrg none network
ttyrh none network
ttyri none network
ttyrj none network
ttyrk none network
ttyrl none network
ttyrm none network
ttyrn none network
ttyro none network
ttyrp none network
ttyrq none network
ttyrr none network
ttyrs none network
ttyrt none network
ttyru none network
ttyrv none network
ttys0 none network
ttys1 none network
ttys2 none network
ttys3 none network
ttys4 none network
ttys5 none network
ttys6 none network
ttys7 none network
ttys8 none network
ttys9 none network
ttysa none network
ttysb none network
ttysc none network
ttysd none network
ttyse none network
ttysf none network
ttysg none network
ttysh none network
ttysi none network
ttysj none network
ttysk none network
ttysl none network
ttysm none network
ttysn none network
ttyso none network
ttysp none network
ttysq none network
ttysr none network
ttyss none network
ttyst none network
ttysu none network
ttysv none network
ttyP0 none network
ttyP1 none network
ttyP2 none network
ttyP3 none network
ttyP4 none network
ttyP5 none network
ttyP6 none network
ttyP7 none network
ttyP8 none network
ttyP9 none network
ttyPa none network
ttyPb none network
ttyPc none network
ttyPd none network
ttyPe none network
ttyPf none network
ttyPg none network
ttyPh none network
ttyPi none network
ttyPj none network
ttyPk none network
ttyPl none network
ttyPm none network
ttyPn none network
ttyPo none network
ttyPp none network
ttyPq none network
ttyPr none network
ttyPs none network
ttyPt none network
ttyPu none network
ttyPv none network
ttyQ0 none network
ttyQ1 none network
ttyQ2 none network
ttyQ3 none network
ttyQ4 none network
ttyQ5 none network
ttyQ6 none network
ttyQ7 none network
ttyQ8 none network
ttyQ9 none network
ttyQa none network
ttyQb none network
ttyQc none network
ttyQd none network
ttyQe none network
ttyQf none network
ttyQg none network
ttyQh none network
ttyQi none network
ttyQj none network
ttyQk none network
ttyQl none network
ttyQm none network
ttyQn none network
ttyQo none network
ttyQp none network
ttyQq none network
ttyQr none network
ttyQs none network
ttyQt none network
ttyQu none network
ttyQv none network
ttyR0 none network
ttyR1 none network
ttyR2 none network
ttyR3 none network
ttyR4 none network
ttyR5 none network
ttyR6 none network
ttyR7 none network
ttyR8 none network
ttyR9 none network
ttyRa none network
ttyRb none network
ttyRc none network
ttyRd none network
ttyRe none network
ttyRf none network
ttyRg none network
ttyRh none network
ttyRi none network
ttyRj none network
ttyRk none network
ttyRl none network
ttyRm none network
ttyRn none network
ttyRo none network
ttyRp none network
ttyRq none network
ttyRr none network
ttyRs none network
ttyRt none network
ttyRu none network
ttyRv none network
ttyS0 none network
ttyS1 none network
ttyS2 none network
ttyS3 none network
ttyS4 none network
ttyS5 none network
ttyS6 none network
ttyS7 none network
ttyS8 none network
ttyS9 none network
ttySa none network
ttySb none network
ttySc none network
ttySd none network
ttySe none network
ttySf none network
ttySg none network
ttySh none network
ttySi none network
ttySj none network
ttySk none network
ttySl none network
ttySm none network
ttySn none network
ttySo none network
ttySp none network
ttySq none network
ttySr none network
ttySs none network
ttySt none network
ttySu none network
ttySv none network
--- End /etc/ttys ---
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14533.25259.297488.968412>