Date: Tue, 15 Feb 2005 09:05:47 -0600 From: "Jeremy Messenger" <mezz7@cox.net> To: racinej@mcmaster.ca Cc: freebsd-gnome@freebsd.org Subject: Re: gnome 2.9.91, ports numbering strangeness... Message-ID: <opsl8uvxxd9aq2h7@mezz.mezzweb.com> In-Reply-To: <1108479331.674.26.camel@pc-racine1.economics.McMaster.CA> References: <1108479331.674.26.camel@pc-racine1.economics.McMaster.CA>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 15 Feb 2005 09:55:31 -0500, Jeffrey Racine <racinej@mcmaster.ca> wrote: > Hi. > > I recently took the plunge to upgrade to gnome 2.9.91 with Marcus' cvs > script. Things are running quite well. However, when I updated my ports > tree after things were all over and ran portupgrade -ary, I am observing > some strangeness. Thanks in advance for any suggestions... You need to rerun marcusmerge.sh at the everytime when you update your ports tree by CVSup. > 1) First, I noticed that pkg_version -l '<' -v yields incorrect updating > info for fileroller... > > fileroller-2.9.91 < needs updating (port has > 2.8.4,1) Ahh, good catch, thanks for report. We will have to add PORTEPOCH in marcuscom. I can commit it after school, unless someone beat me. > 2) When I upgrade gstreamer-plugins that correctly reports, > > gstreamer-plugins-0.8.7 < needs updating (port has > 0.8.7_1) Should be no big deal if you run marcusmerge.sh at the everytime you update your ports tree by CVSup. > it remakes glib (it ought not?, and reports incorrectly that an older > version is installed) stopping with the message Again, need to re-run marcusmerge.sh. Cheers, Mezz > ===> Installing for glib-2.4.8 > ===> glib-2.4.8 depends on file: /usr/local/bin/perl5.8.6 - found > ===> glib-2.4.8 depends on executable: pkg-config - found > ===> Generating temporary packing list > ===> Checking if devel/glib20 already installed > ===> An older version of devel/glib20 is already installed > (glib-2.6.2) > You may wish to ``make deinstall'' and install this port again > by ``make reinstall'' to upgrade it properly. > If you really wish to overwrite the old port of devel/glib20 > without deleting it first, set the variable "FORCE_PKG_REGISTER" > in your environment or the "make install" command line. > > Some system info: > > uname -a > FreeBSD pc-racine1.McMaster.CA 6.0-CURRENT FreeBSD 6.0-CURRENT #0: Mon > Feb 7 11:05:50 EST 2005 > root@pc-racine1.McMaster.CA:/usr/obj/usr/src/sys/OPTIPLEX i386 > > pc-racine1# dmesg > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 6.0-CURRENT #0: Mon Feb 7 11:05:50 EST 2005 > root@pc-racine1.McMaster.CA:/usr/obj/usr/src/sys/OPTIPLEX > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.01-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 2137546752 (2038 MB) > avail memory = 2086993920 (1990 MB) > ACPI APIC Table: <DELL SX280 > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 8 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > lapic0: Forcing LINT1 to edge trigger > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <DELL SX280 > on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci0: <display, VGA> at device 2.0 (no driver attached) > pci0: <display> at device 2.1 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem > 0xdfcf0000-0xdfcfffff irq 16 at device 0.0 on pci2 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX-FDX, auto > bge0: Ethernet address: 00:11:43:9e:a3:4a > uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port > 0xff80-0xff9f irq 21 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > umass0: Sony USB Floppy Drive, rev 1.10/5.01, addr 2 > uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, > addr 3 > uhub1: 4 ports with 4 removable, self powered > uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port > 0xff60-0xff7f irq 22 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhub3: Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 2 > uhub3: 3 ports with 2 removable, bus powered > ukbd0: Dell Dell USB Keyboard Hub, rev 1.10/2.00, addr 3, iclass 3/1 > kbd1 at ukbd0 > uhid0: Dell Dell USB Keyboard Hub, rev 1.10/2.00, addr 3, iclass 3/1 > ums0: vendor 0x413c product 0x3010, rev 2.00/2.20, addr 4, iclass 3/1 > ums0: 3 buttons and Z dir. > uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port > 0xff40-0xff5f irq 18 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub4: 2 ports with 2 removable, self powered > uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port > 0xff20-0xff3f irq 23 at device 29.3 on pci0 > uhci3: [GIANT-LOCKED] > usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 > usb3: USB revision 1.0 > uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub5: 2 ports with 2 removable, self powered > pci0: <serial bus, USB> at device 29.7 (no driver attached) > pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcm0: <Intel ICH6 (82801FB)> port 0xe8c0-0xe8ff,0xec00-0xecff mem > 0xdfebfd00-0xdfebfdff,0xdfebfe00-0xdfebffff irq 23 at device 30.2 on > pci0 > pcm0: [GIANT-LOCKED] > pcm0: <Analog Devices AD1981B AC97 Codec> > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH6 UDMA100 controller> port > 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 31.1 > on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > atapci1: <Intel ICH6 SATA150 controller> port > 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 > irq 20 at device 31.2 on pci0 > ata2: channel #0 on atapci1 > ata3: channel #1 on atapci1 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 > pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0 > pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 > pci_link3: <ACPI PCI Link LNKD> on acpi0 > pci_link4: <ACPI PCI Link LNKE> irq 9 on acpi0 > pci_link5: <ACPI PCI Link LNKF> irq 10 on acpi0 > pci_link6: <ACPI PCI Link LNKG> irq 9 on acpi0 > pci_link7: <ACPI PCI Link LNKH> irq 3 on acpi0 > ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on > acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xca800-0xcbfff,0xc0000-0xca7ff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > Timecounters tick every 1.000 msec > ad4: 238418MB <Maxtor 7Y250M0/YAR51HW0> [484406/16/63] at ata2-master > SATA150 > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0 > (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred > (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > lapic1: Forcing LINT1 to edge trigger > SMP: AP CPU #1 Launched! > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <SONY USB-FDU 5.01> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > Trying to mount root from ufs:/dev/ad4s1a > bge0: link state changed to UP > ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2 > ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2 > ucom0: at uhub5 port 1 (addr 2) disconnected > All threads purged from cuaU0 > All threads purged from ttyU0 > ucom0: detached -- mezz7@cox.net - mezz@FreeBSD.org FreeBSD GNOME Team http://www.FreeBSD.org/gnome/ - gnome@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?opsl8uvxxd9aq2h7>