Date: Mon, 3 Sep 2001 12:29:48 -0700 From: Chip <chip@wiegand.org> To: <freebsd-questions@FreeBSD.ORG> Subject: Re: replacing a cisco router with a fbsd box Message-ID: <0109031229480C.44697@chip.wiegand.org>
next in thread | raw e-mail | index | archive | help
>------- Original Message ----- >From : "Ted Mittelstaedt" <tedm@toybox.placo.com> >Sent: Sun, 2 Sep 2001 22:17:38 -0700 >To: "Joe Clarke" <marcus@marcuscom.com>, "Chip"<chip@wiegand.org> >Cc: freebsd-question@FreeBSD.ORG >Subject: Re: replacing a cisco router with a fbsd box >Just be sure that you are running current code or an access list because >there were several security holes discovered in cisco IOS. > >If you do a "sh hard" or a "sh ver" what is the IOS version? >Ted Mittelstaedt Here's the response from sh hard: ---------------------------------------- Simrad-UUNET>sh hard Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-IO3-M), Version 12.0(5)T1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Tue 17-Aug-99 14:24 by cmong Image text-base: 0x80008088, data-base: 0x8078D428 ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Simrad-UUNET uptime is 3 days, 4 hours, 54 minutes System returned to ROM by power-on System image file is "flash:c2600-io3-mz.120-5.T" cisco 2610 (MPC860) processor (revision 0x202) with 26624K/6144K bytes of memory. Processor board ID JAD040624PM (671937365) M860 processor: part number 0, mask 49 Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 1 Serial network interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 ------------------------------------------------- I don't know any other commands to get any other info, hopefully that is what you are looking for. Chip >>From : Joe Clarke [mailto:marcus@marcuscom.com] >>Sent: Sunday, September 02, 2001 8:47 PM >>To: Chip >>Cc: Ted Mittelstaedt; freebsd-question@FreeBSD.ORG >>Subject: Re: replacing a cisco router with a fbsd box >> >>Telnet is one way of going, but if the router isn't allowing connections >>you'll need to do it from the console. I can also send you a good list of >>SNMP objects for polling if you'd like that. >> >>Joe. -- -- Chip W. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0109031229480C.44697>