Date: Sun, 20 Jul 2014 21:39:26 -0600 From: Ian Lepore <ian@FreeBSD.org> To: FreeBSD ARM <freebsd-arm@FreeBSD.org> Subject: Re: Compiling clang33 port on Raspberry Pi Message-ID: <1405913966.85788.66.camel@revolution.hippie.lan> In-Reply-To: <1405907282.85788.64.camel@revolution.hippie.lan> References: <C89B230E-A548-4AB6-84C3-A4F6D9446D28@gmail.com> <1405907282.85788.64.camel@revolution.hippie.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 2014-07-20 at 19:48 -0600, Ian Lepore wrote: > On Mon, 2014-07-21 at 12:56 +1200, Stephen Woolerton wrote: > > Hi everyone, > > > > I'm would like to install the clang33 package on a Raspberry Pi running 10.0-STABLE (r268038). I compiled the clang33 port on the Pi and it crashed as outlined below. > > > > I'm hoping someone can give me a hand to get the crash resolved, or maybe there is another way of getting clang33 installed. > > Note: Regarding LibraryDependencies.inc, I googled and found that this issue can occur if python v2 is not available. Python27 is installed on this system but no "python" binary, and so I symlinked python27 to python in /usr/local/bin, but still the same fault. > > > > Thank you > > Stephen > > -------------------- > > ... > > > > llvm-build: error: invalid native target: 'armv6' (not in project) > > llvm[3]: Linking Release Shared Library libLLVM-3.3.so > > gmake[3]: Leaving directory `/usr/ports/devel/llvm33/work/llvm-3.3.src/tools/llvm-shlib' > > gmake[3]: Entering directory `/usr/ports/devel/llvm33/work/llvm-3.3.src/tools/llvm-config' > > llvm[3]: Constructing LLVMBuild project information. > > Usage: llvm-build [options] > > > > llvm-build: error: invalid native target: 'armv6' (not in project) > > llvm[3]: Building llvm-config BuildVariables.inc file. > > llvm[3]: Compiling llvm-config.cpp for Release build > > llvm-config.cpp:45:10: fatal error: 'LibraryDependencies.inc' file not found > > #include "LibraryDependencies.inc" > > ^ > > 1 error generated. > > rm: /usr/ports/devel/llvm33/work/llvm-3.3.src/tools/llvm-config/Release/llvm-config.d.tmp: No such file or directory > > gmake[3]: *** [/usr/ports/devel/llvm33/work/llvm-3.3.src/tools/llvm-config/Release/llvm-config.o] Error 1 > > gmake[3]: Leaving directory `/usr/ports/devel/llvm33/work/llvm-3.3.src/tools/llvm-config' > > gmake[2]: *** [all] Error 1 > > gmake[2]: Leaving directory `/usr/ports/devel/llvm33/work/llvm-3.3.src' > > ===> Compilation failed unexpectedly. > > Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to > > the maintainer. > > *** Error code 1 > > > > Stop. > > make[1]: stopped in /usr/ports/devel/llvm33 > > *** Error code 1 > > > > Stop. > > make: stopped in /usr/ports/devel/llvm33 > > > > ===>>> make build failed for devel/llvm33 > > ===>>> Aborting update > > > > ===>>> Update for devel/llvm33 failed > > ===>>> Aborting update > > > > ===>>> Update for lang/clang33 failed > > ===>>> Aborting update > > > > > > ===>>> You can restart from the point of failure with this command line: > > portmaster <flags> lang/clang33 devel/llvm33 > > I had the same problem today trying to build llvm-devel and clang-devel > (clang 3.5) on a wandboard. The actual problem is "llvm-build: error: > invalid native target: 'armv6' (not in project)"; it leads to the > dependencies not being built. > > Try copying the attached file into the files directory of *both* the > llvm and clang ports, replacing the same-named file already there, then > do a make clean and start the build over. > > -- Ian > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" Hrm, apparently the attachment got scrubbed from the list, presumably because the filename ended in .py. There are no tabs or anything in it, so I'll just paste it here... --- utils/llvm-build/llvmbuild/main.py.orig 2014-04-23 19:17:42 +0000 +++ utils/llvm-build/llvmbuild/main.py 2014-07-20 14:45:44 +0000 @@ -699,7 +699,16 @@ # We handle a few special cases of target names here for historical # reasons, as these are the names configure currently comes up with. - native_target_name = { 'x86' : 'X86', + native_target_name = { 'amd64' : 'X86', + 'arm' : 'ARM', + 'armeb' : 'ARM', + 'armv6' : 'ARM', + 'armv6hf' : 'ARM', + 'i386' : 'X86', + 'mips' : 'Mips', + 'powerpc' : 'PowerPC', + 'sparc64' : 'Sparc', + 'x86' : 'X86', 'x86_64' : 'X86', 'Unknown' : None }.get(opts.native_target, opts.native_target) -- Ian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1405913966.85788.66.camel>