Date: Tue, 24 Mar 1998 11:37:15 -0800 (PST) From: Ulf Zimmermann <ulf@Alameda.net> To: parrothd@midwest.net (Jonathan E. Lyons) Cc: ulf@Alameda.net, questions@FreeBSD.ORG Subject: Re: I give up, how do I use ppp with -auto, chap and dynamic addresses ? Message-ID: <199803241937.LAA04670@Gatekeeper.Alameda.net> In-Reply-To: <3.0.5.32.19980324105118.00837d60@midwest.net> from "Jonathan E. Lyons" at "Mar 24, 98 10:51:18 am"
next in thread | previous in thread | raw e-mail | index | archive | help
> I'm not totally sure about this, but are you sure that you need to logon > twice? Try commenting out the accpet chap, also try adding "set openmode > active"? Here's what mine looks like for a chap login.. > global: Unfortunatly yes. As you see in the set login part, it waits for "Sign-on" and then no password is asked. After this ppp is started and chap comes over the line. > > accept chap > deny pap > set phone 1231234 > set authname name > set authkey password > set openmode active > set ifaddr 209.6.64.1/0 209.6.64.59/0 255.255.255.0 > add 0 0 209.6.64.59 > alias port udp 10.10.0.10:20 20 > alias port tcp 10.10.0.10:20 20 > alias port udp 10.10.0.10:21 21 > alias port tcp 10.10.0.10:21 21 > > > worldnet: > > set phone 18085368495 > > accept chap > > deny pap > > set authname <username> > > set authkey <password> > > set login "TIMEOUT 5 Please Sign-on:-\\r-ign-on:" > > set timeout 120 > > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > > delete ALL > > add 0 0 HISADDR > > > > > At 06:06 AM 3/24/98 -0800, Ulf Zimmermann wrote: > >Trying to dial into AT&T Worldnet, chat itself it login in, then > >currently either the chap or the IP assignment fails. > > > >/etc/ppp/ppp.conf looks like this: > > > >default: > > set device /dev/cuaa1 > > set speed 115200 > > set log Phase Chat Connect Carrier hdlc LCP IPCP CCP tun > > deny lqr > > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK > \\dATDT\\T TIMEOUT 40 CONNECT" > > > >worldnet: > > set phone 18085368495 > > accept chap > > deny pap > > set authname <username> > > set authkey <password> > > set login "TIMEOUT 5 Please Sign-on:-\\r-ign-on:" > > set timeout 120 > > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > > delete ALL > > add 0 0 HISADDR > > > >Here is a syslog cut+paste: > > > >Mar 24 07:07:53 system3 ppp[277]: tun0: Phase: Using interface: tun0 > >Mar 24 07:07:53 system3 ppp[277]: tun0: Phase: PPP Started. > >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Expecting > >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: sending: ATE1Q0^M > >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Expecting OK-AT-OK > >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Wait for (5): OK --> OK > >Mar 24 07:07:55 system3 ppp[277]: tun0: Connect: ATE1Q0^M^M > >Mar 24 07:07:55 system3 ppp[277]: tun0: Connect: OK > >Mar 24 07:07:55 system3 ppp[277]: tun0: Phase: Phone: 18085368495 > >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: sending: ATDT18085368495^M > >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Expecting CONNECT > >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Wait for (40): CONNECT --> > CONNECT > > > >Mar 24 07:07:55 system3 ppp[277]: tun0: Connect: ^M > >Mar 24 07:08:21 system3 ppp[277]: tun0: Connect: ATDT18085368495^M^M > >Mar 24 07:08:21 system3 ppp[277]: tun0: Connect: CONNECT > >Mar 24 07:08:21 system3 ppp[277]: tun0: Chat: Expecting Please > >Mar 24 07:08:21 system3 ppp[277]: tun0: Chat: Wait for (5): Please --> Please > >Mar 24 07:08:21 system3 ppp[277]: tun0: Connect: 115200^M > >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: ^M > >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: STATION ID - > hnlhi02ms09am002,s > >nfca05ev^M > >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: ^M > >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: Welcome ^M > >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: Please > >Mar 24 07:08:23 system3 ppp[277]: tun0: Chat: sending: Sign-on:-^M-ign-on:^M > >Mar 24 07:08:23 system3 ppp[277]: tun0: Phase: *Connected! > >Mar 24 07:08:23 system3 ppp[277]: tun0: IPCP: Using trigger address > 255.255.255. > >0 > >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: State change Initial --> Closed > >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: LcpSendConfigReq > >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: ACFCOMP > >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: PROTOCOMP > >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 > >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: MRU [4] 1500 > >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 > >Mar 24 07:08:23 system3 ppp[277]: tun0: HDLC: HdlcOutput > >Mar 24 07:08:23 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 > >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: State change Closed --> Req-Sent > >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: LcpSendConfigReq > >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: ACFCOMP > >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: PROTOCOMP > >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 > >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: MRU [4] 1500 > >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 > >Mar 24 07:08:26 system3 ppp[277]: tun0: HDLC: HdlcOutput > >Mar 24 07:08:26 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 > >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: LcpSendConfigReq > >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: ACFCOMP > >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: PROTOCOMP > >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 > >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: MRU [4] 1500 > >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 > >Mar 24 07:08:29 system3 ppp[277]: tun0: HDLC: HdlcOutput > >Mar 24 07:08:29 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 > >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: LcpSendConfigReq > >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: ACFCOMP > >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: PROTOCOMP > >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 > >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: MRU [4] 1500 > >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 > >Mar 24 07:08:32 system3 ppp[277]: tun0: HDLC: HdlcOutput > >Mar 24 07:08:32 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 > >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: LcpSendConfigReq > >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: ACFCOMP > >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: PROTOCOMP > >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 > >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: MRU [4] 1500 > >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 > >Mar 24 07:08:35 system3 ppp[277]: tun0: HDLC: HdlcOutput > >Mar 24 07:08:35 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 > >Mar 24 07:08:38 system3 ppp[277]: tun0: LCP: State change Req-Sent --> > Stopped > >Mar 24 07:08:38 system3 ppp[277]: tun0: LCP: LcpLayerFinish > >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: NewPhase: Dead > >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: NewPhase: Terminate > >Mar 24 07:08:39 system3 ppp[277]: tun0: IPCP: Using trigger address > 255.255.255. > >0 > >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: Disconnected! > >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: Connect time: 16 secs > >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: NewPhase: Dead > >Mar 24 07:08:44 system3 ppp[277]: tun0: Phase: PPP Terminated (normal). > > > >Any suggestions ? Tips ? > > > >A tired, Ulf. > > > >(damn, I am doing too much with Ciscos) > > > > > >--------------------------------------------------------------------- > >Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-769-2936 > >Alameda Networks, Inc. | http://www.Alameda.net | Fax#: 510-521-5073 > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > > > Ulf. --------------------------------------------------------------------- Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-769-2936 Alameda Networks, Inc. | http://www.Alameda.net | Fax#: 510-521-5073 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199803241937.LAA04670>