Date: Wed, 07 Sep 2005 19:00:17 +0100 From: "tonix (Antonio Nati)" <tonix@interazioni.it> To: freebsd-scsi@FreeBSD.ORG Subject: Re: camcontrol and IDAD0 Message-ID: <6.2.3.4.0.20050907185955.0546ec68@pop.ufficiopostale.it> In-Reply-To: <20050907133856.C84118@sasami.jurai.net> References: <6.2.3.4.0.20050901172618.0532ecb0@pop.ufficiopostale.it> <20050906084747.A84118@sasami.jurai.net> <6.2.3.4.0.20050907153854.04c36bc8@pop.ufficiopostale.it> <6.2.3.4.0.20050907163520.05554a30@pop.ufficiopostale.it> <6.2.3.4.0.20050907164953.0548c070@pop.ufficiopostale.it> <20050907133856.C84118@sasami.jurai.net>
next in thread | previous in thread | raw e-mail | index | archive | help
At 18.41 07/09/2005, you wrote: >On Wed, 7 Sep 2005, tonix (Antonio Nati) wrote: >>System is continuosly hanging. >> >>This is the screen shot of system hanging, with details on IDAD error. >> >>ida0: soft error >>ida_command: out of QCBsida0: ida_timeout() qactive 256 >>ida0: IDA_INTERRUPTS >>ida0: R_CMD_FIFO: 00000000 >> R_DONE_FIFO: 00000000 >> R_INT_MASK: 00000000 >> R_STATUS: 00000000 >> R_INT_PENDING: 00000000 > >Ah, yes. I believe you've run into a firmware crash. > >Make sure your cards have the latest firmware running. I've the latest firmware available (Integrated Smart Array, version 1.50) >I've seen cases where hot swapping drives causes the firmware to >reset and lock up (based on the LED pattern of the diagnostic lights >on my cards.) Recovery started correctly, and I started my "makeworld" compilation, then at half work done machine hang. Tonino >-- >10 40 80 C0 00 FF FF FF FF C0 00 00 00 00 10 AA AA 03 00 00 00 08 00
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20050907185955.0546ec68>