Date: Thu, 11 Jan 1996 12:36:20 -0800 From: dlhodge@netcom.com (Dave Hodge) To: se@freebsd.org Cc: hardware@freebsd.org Subject: Here is all the information from "Boot -v" on my Compaq DeskPro XL 575 Message-ID: <9601112036.AA09707@popper.PacBell.COM>
next in thread | raw e-mail | index | archive | help
Hello Stefan, I hope this is all the information that you've requested. I am willing to help where ever possible. The only caveat is that I am a bit of NOVICE. Here is the information: ------------------------------------------------------------------------------ Boot: -v Booting fd (0,a) /Kernel at 0x20c000 text=0xfc000 data=0x0 loss=0xa00 symbols=[+0x600+0x4+0x27c+0x4+0x1fb] total=0x30947f entry point=0x20c000 Uncompressing kernel ... done Booting Kernel BIOS basemem (639K) !=RTC basemem (640K) Copyright (c) 1982, 1986, 1989, 1991, 1993 The Reqents of the University of California FreeBSD 2.1.0-RELEASE #0: Sat Nove 18 10:21:19 1995 jkh@werhill.cdrom.com:/usr/src/sys/compile/BOOTMFS CPU: 75-MHZ Pentium 734\90 or 815\100 (Pentium-class CPU) Origin="GenuineIntel" Id=0x524 Stepping=4 Features=0x1bf<FPU, VME, PSE, MCE, CX8, APIC> real memory= 16777216 (16384K bytes) avail memory= 13770752 (13448K bytes) Probing for devices on the ISA bus: sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 ed1 not found at 0x300 sio0 at 0x3f8-0x3ff irq 4 on isa sio0 type 16550A sio1 not found at 0x2f8 sio2 not found at 0x3e8 sio3 not found at 0x2e8 lpt0 at 0x378-0x37f irq 7 on isa lpt0 Interrupt-driven port lp0: TCP/IP Capable interface lpt1 not found at 0xffffffff lpt2 not found at 0xffffffff mse0: wrong signature ff mse0: not found at 0x23c fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: 1.44 MB 3.5 in wdc0 not found at 0x1f0 wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 ahc1 not found ahb0 not found aha0 not found at 0x330 aic0 not found at 0x340 nca0 not found at 0x1f88 nca1 not found at 0x350 sea0 not found wt0 not found at 0x300 mcd0: timeout getting status mcd0 not found at 0x340 mcd1: timeout getting status mcd1 not found at 0x340 matcdc0 not found at 0x230 scd0 not found at 0x230 le0 not found at 0x360 ep0 not found at 0x300 lx0 not found at 0x300 le0 no board found at 0x300 lnc0 not found at 0x300 lnc1 not found at 0x280 ze0 not found at 0x300 zp0 not found at 0x300 npx0 on mother board npx0:INT 16 interface pcibus_setup(1): mode1res=0x8000000c (0x80000000), mode2res=0x0c (0x0e) rootfs is 1000 Kbyte compiled in MFS BIOS Gemometries: 0:01fe3f20 0..510=511 cylinders, 0..63=64 heads, 1..32=32 sectors 1:00000000 0..=1 cylinders, 0..0=1 heads, 1..0=0 sectors 2:00000000 0..=1 cylinders, 0..0=1 heads, 1..0=0 sectors 3:00000000 0..=1 cylinders, 0..0=1 heads, 1..0=0 sectors 4:00000000 0..=1 cylinders, 0..0=1 heads, 1..0=0 sectors 5:00000000 0..=1 cylinders, 0..0=1 heads, 1..0=0 sectors 6:00000000 0..=1 cylinders, 0..0=1 heads, 1..0=0 sectors 7:00000000 0..=1 cylinders, 0..0=1 heads, 1..0=0 sectors 0: accounted for ------------------------------------------------------------------------------ Thanks again .. David Hodge dlhodge@netcom.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9601112036.AA09707>