Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 18 Oct 2005 20:06:11 +0000 (GMT)
From:      wpaul@FreeBSD.ORG (Bill Paul)
To:        wsk@gddsn.org.cn (Suken Woo)
Cc:        mv@roq.com, hardware@freebsd.org, mobile@freebsd.org, current@freebsd.org
Subject:   Re: Netgear WG511 drivers help
Message-ID:  <20051018200611.7474E16A42F@hub.freebsd.org>
In-Reply-To: <43544BCE.90601@gddsn.org.cn> from Suken Woo at "Oct 18, 2005 09:11:42 am"

next in thread | previous in thread | raw e-mail | index | archive | help
> Suken Woo Wrote:
> 
> >> lists:
> >> the Netgear WG511 dosen't support on freebsd and ndis wrapper doesn't
> >> work either
> >> anybody could give any help??
> >> _______________________________________________
> >> freebsd-mobile@freebsd.org mailing list
> >> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> >> To unsubscribe, send any mail to 
> >> "freebsd-mobile-unsubscribe@freebsd.org"
> >>  
> >>
> > Did your Netgear WG511 say 'Atheros' on its packaging?
> > what does pciconf -lv say about it?
> >
> > I have a WG511T and it works fine its a Atheros.
> >
> > Mike
> >
> >
> the WG511 useing the difference chip set i though. and here's my
> pciconfig -lv lists:
> none1@pci3:0:0: class=0x020000 card=0x4e001385 chip=0x1faa11ab rev=0x03 
> hdr=0x00    vendor   = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>     class    = network
>     subclass = ethernet
> and some dmesgs:
> cardbus0: Resource not specified in CIS: id=14, size=10000
> cardbus0: <network, ethernet> at device 0.0 (no driver attached)
> 
> BTW,my card's type is WG511 v2.

I have the following:

none7@pci1:0:0: class=0x020000 card=0x1faa11ab chip=0x1faa11ab rev=0x03 hdr=0x00
    vendor   = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    class    = network
    subclass = ethernet

This is a Marvell 8335 card, and it works with the latest incarnation
of Project Evil in -current:

ndis0: <Marvell Libertas 802.11b/g Wireless (8335)> mem 0x88010000-0x8801ffff,0x88020000-0x8802ffff irq 9 at device 0.0 on cardbus0
ndis0: NDIS API version: 5.1

Note however that I've been experiencing a peculiar problem with my
particular card and laptop. The card is a no-name brand ("Mentor"),
and I'm using it in my Sony Vaio Picturebook laptop. For the most
part it works ok: I can initialize it, get it to associate, I can
even do WPA2 with it using wpa_supplicant. The only problem is that
after it's been running for a while (usually several hours, though
sometimes sooner), the laptop will freeze up. Typically when it happens,
one of the LEDs on the card will be flashing, which I think means it's
become disassociated or the re-keying interval has expired. Sadly,
since the whole laptop wedges up completely, I have no clue what's
causing the problem.

I haven't noticed the same problem when testing the same card with
my Soekris board at home, and I don't have another laptop or card
to test it with, so I'm at a bit of a loss. I've tried everything I
can think of to try and get the laptop to cough up some useful info
but with no joy. The fact that I can only get it to crash maybe once
or twice a day doesn't help.

I suspect the issue is related to WPA2 somehow, so if you're not
going to use that, you may not notice any problems. Give it a try
and see what happens.

-Bill

--
=============================================================================
-Bill Paul            (510) 749-2329 | Senior Engineer, Master of Unix-Fu
                 wpaul@windriver.com | Wind River Systems
=============================================================================
              <adamw> you're just BEGGING to face the moose
=============================================================================



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051018200611.7474E16A42F>