Date: Tue, 14 May 2002 16:11:30 +0200 From: "Chris Schaller" <cs-lists@bsdguru.de> To: <freebsd-questions@freebsd.org> Cc: <freebsd-mobile@freebsd.org> Subject: pcmcia wireless card from unknown vendor Message-ID: <004b01c1fb51$3eff5c50$0a00a8c0@artoc.de>
next in thread | raw e-mail | index | archive | help
Salut,
I' m trying to get my pcmcia wireless card running under freebsd 4.5.
Till now I didn't succeed.
Does anyone have good liks on this topic.
# pccardc dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4
000: 67 5a 08 ff
Attribute memory device information:
Device number 1, type SRAM, WPS = OFF
Speed = 5.0 x 100 ns, Memory block size = 512b, 2 units
Tuple #3, code = 0x1d (Other conditions for attribute memory), length = 5
000: 03 67 5a 08 ff
(MWAIT) (3V card)
Tuple #4, code = 0x15 (Version 1 info), length = 80
000: 05 00 41 57 4c 41 4e 00 57 53 38 50 2f 49 45 45
010: 45 00 56 65 72 73 69 6f 6e 20 30 30 2e 30 30 00
020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
Version = 5.0, Manuf = [AWLAN], card vers = [WS8P/IEEE]
Addit. info = [Version 00.00],[]
Tuple #5, code = 0x20 (Manufacturer ID), length = 4
000: 56 01 02 00
PCMCIA ID = 0x156, OEM ID = 0x2
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #7, code = 0x22 (Functional EXT), length = 2
000: 01 07
Network technology: Wireless
Tuple #8, code = 0x22 (Functional EXT), length = 5
000: 02 40 42 0f 00
Network speed: 1 Mb/sec
Tuple #9, code = 0x22 (Functional EXT), length = 5
000: 02 80 84 1e 00
Network speed: 2 Mb/sec
Tuple #10, code = 0x22 (Functional EXT), length = 5
000: 02 60 ec 53 00
Network speed: 5 Mb/sec
Tuple #11, code = 0x22 (Functional EXT), length = 5
000: 02 c0 d8 a7 00
Network speed: 11 Mb/sec
Tuple #12, code = 0x22 (Functional EXT), length = 2
000: 03 07
Network media: 2.4 GHz
Tuple #13, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 01 24 f1 27 58
Network node ID: 00 01 24 f1 27 58
Tuple #14, code = 0x22 (Functional EXT), length = 2
000: 05 01
Network connector: closed connector standard
Tuple #15, code = 0x1a (Configuration map), length = 7
000: 03 01 e0 03 00 00 01
Reg len = 4, config register addr = 0x3e0, last config = 0x1
Registers: X-------
Tuple #16, code = 0x1b (Configuration entry), length = 16
000: c1 01 19 77 b5 1e 35 b5 3c 36 36 05 46 7f ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Minimum operating supply voltage: 3 x 1V
Maximum operating supply voltage: 3 x 1V, ext = 0x3c
Max current average over 1 second: 3 x 100mA
Max current average over 10 ms: 3 x 100mA
Power down supply current: 1 x 10mA
Card decodes 6 address lines, limited 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQs: NMI IOCK BERR VEND 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
15
Tuple #17, code = 0xff (Terminator), length = 0
2 slots found
Thanx in advance,
Chris
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004b01c1fb51$3eff5c50$0a00a8c0>