Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 10 Aug 2007 08:30:32 +0100
From:      Bruce Cran <bruce@cran.org.uk>
To:        Thomas.Sparrevohn@btinternet.com
Cc:        'Artem Naluzhny' <tut@nhamon.com.ua>, acpi@freebsd.org, current@freebsd.org
Subject:   Re: RE: Reboot on "shutdown -r" hangs after final "uptime ..." string
Message-ID:  <46BC1418.9070008@cran.org.uk>
In-Reply-To: <002501c7973a$eac3db30$c04b9190$@Sparrevohn@btinternet.com>
References:  <65dfa4fc0705151353v1eb9a16dsff46c9f6ea6f4b63@mail.gmail.com> <002501c7973a$eac3db30$c04b9190$@Sparrevohn@btinternet.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Thomas Sparrevohn wrote:
> I have the same problem - just as a test try to load a kernel without any USB drivers at all
> And shutdown - on my machine it the ACPI part works - however the system hangs during the device 
> Shutdown phase - this machine is a dell as well - would be nice if somebody using other than dell has the 
> problem
>   
I'm running 7.0-CURRENT and am seeing the same problem on my Dell 
Inspiron 1501 amd64 laptop.  This machine has OHCI and EHCI controllers; 
removing the EHCI driver solves the problem and allows the computer to 
reboot properly.  I initially thought it was an ACPI problem but now I'm 
not so sure - is there anything I can do to help debug it?  I've added 
printfs to kern_shutdown.c and as far as I can see the last function to 
be called is shutdown_wait; since that doesn't do anything I know more 
is going on, but I don't know where to look.

--
Bruce Cran

>   
>> -----Original Message-----
>> From: owner-freebsd-acpi@freebsd.org [mailto:owner-freebsd-
>> acpi@freebsd.org] On Behalf Of Artem Naluzhny
>> Sent: 15 May 2007 21:54
>> To: acpi@freebsd.org
>> Subject: Reboot on "shutdown -r" hangs after final "uptime ..." string
>>
>> Hi
>>
>> I played with different combinations of debug.acpi.do_powerstate,
>> hw.acpi.disable_on_reboot and hw.acpi.handle_reboot sysctls on my
>> Inspiron 1501 notebook without success. Environment:
>>
>> FreeBSD 7.0-CURRENT #1: Thu May 10 21:22:20 EEST 2007
>>     root@tut.intra:/usr/obj/usr/src/sys/TUT
>> WARNING: WITNESS option enabled, expect reduced performance.
>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc082b000.
>> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc082b1c4.
>> Calibrating clock(s) ... i8254 clock: 1193176 Hz
>> CLK_USE_I8254_CALIBRATION not specified - using default frequency
>> Timecounter "i8254" frequency 1193182 Hz quality 0
>> Calibrating TSC clock ... TSC clock: 1596011252 Hz
>> CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.01-MHz 686-
>> class CPU)
>>   Origin = "AuthenticAMD"  Id = 0x40f82  Stepping = 2
>>
>> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
>> E,MCA,CMOV,PAT,PSE36,CLFLU
>> SH,MMX,FXSR,SSE,SSE2,HTT>
>>   Features2=0x2001<SSE3,CX16>
>>   AMD
>> Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
>>   AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
>> HTT bit cleared - FreeBSD does not have licensing issues requiring it.
>>
>>   Cores per package: 2
>> Data TLB: 32 entries, fully associative
>> Instruction TLB: 32 entries, fully associative
>> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
>> associative
>> L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way
>> associative
>> real memory  = 937885696 (894 MB)
>> Physical memory chunk(s):
>> 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
>> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>> 0x0000000000c28000 - 0x0000000036e6ffff, 908361728 bytes (221768 pages)
>> avail memory = 908304384 (866 MB)
>> Table 'FACP' at 0x37e7fb9a
>> Table 'TCPA' at 0x37e7fc0e
>> Table 'SSDT' at 0x37e7fc40
>> Table 'APIC' at 0x37e7fdc2
>> MADT: Found table at 0x37e7fdc2
>> MP Configuration Table version 1.4 found at 0xc009e171
>> APIC: Using the MADT enumerator.
>> MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
>> SMP: Added CPU 0 (AP)
>> MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
>> SMP: Added CPU 1 (AP)
>> ACPI APIC Table: <PTLTD          APIC  >
>> INTR: Adding local APIC 1 as a target
>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>>  cpu0 (BSP): APIC ID:  0
>>  cpu1 (AP): APIC ID:  1
>> bios32: Found BIOS32 Service Directory header at 0xc00f84a0
>> bios32: Entry = 0xfdc84 (c00fdc84)  Rev = 0  Len = 1
>> pcibios: PCI BIOS entry at 0xfdc80+0x0
>> pnpbios: Found PnP BIOS data at 0xc00f8540
>> pnpbios: Entry = e5d0:9499  Rev = 1.0
>> Other BIOS signatures found:
>> APIC: CPU 0 has ACPI ID 0
>> APIC: CPU 1 has ACPI ID 1
>> ACPI: RSDP @ 0x0xf8500/0x0014 (v  0 PTLTD )
>> ACPI: RSDT @ 0x0x37e79578/0x0040 (v  1 DELL    M08     0x06040000  LTP
>> 0x00000000)
>> ACPI: FACP @ 0x0x37e7fb9a/0x0074 (v  1 ATI    Bowfin   0x06040000 ATI
>> 0x000F4240)
>> ACPI: DSDT @ 0x0x37e795b8/0x65E2 (v  1    ATI    SB600 0x06040000 MSFT
>> 0x03000000)
>> ACPI: FACS @ 0x0x37e90fc0/0x0040
>> ACPI: TCPA @ 0x0x37e7fc0e/0x0032 (v  2 AMD             0x06040000 PTEC
>> 0x00000000)
>> ACPI: SSDT @ 0x0x37e7fc40/0x0182 (v  1 PTLTD  POWERNOW 0x06040000  LTP
>> 0x00000001)
>> ACPI: APIC @ 0x0x37e7fdc2/0x0054 (v  1 PTLTD     APIC   0x06040000
>> LTP 0x00000000)
>> ACPI: MCFG @ 0x0x37e7fe16/0x003C (v  1 PTLTD    MCFG   0x06040000  LTP
>> 0x00000000)
>> ACPI: HPET @ 0x0x37e7fe52/0x0038 (v  1 PTLTD  HPETTBL  0x06040000  LTP
>> 0x00000001)
>> ACPI: SLIC @ 0x0x37e7fe8a/0x0176 (v  1 DELL    M08     0x06040000  LTP
>> 0x00000000)
>> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>> ioapic0: Routing external 8259A's -> intpin 0
>> lapic0: Routing NMI -> LINT1
>> lapic0: LINT1 trigger: edge
>> lapic0: LINT1 polarity: high
>> lapic1: Routing NMI -> LINT1
>> lapic1: LINT1 trigger: edge
>> lapic1: LINT1 polarity: high
>> MADT: Forcing active-low polarity and level trigger for SCI
>> ioapic0: intpin 9 polarity: low
>> ioapic0: intpin 9 trigger: level
>> ioapic0 <Version 2.1> irqs 0-23 on motherboard
>> cpu0 BSP:
>>      ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
>>   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>>   timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
>> io: <I/O>
>> null: <null device, zero device>
>> random: <entropy source, Software, Yarrow>
>> kbd: new array size 4
>> kbd1 at kbdmux0
>> mem: <memory>
>> Pentium Pro MTRR support enabled
>> npx0: INT 16 interface
>> acpi0: <DELL M08    > on motherboard
>> ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
>> acpi0: [MPSAFE]
>> acpi0: [ITHREAD]
>> pci_open(1):    mode 1 addr port (0x0cf8) is 0x80009020
>> pci_open(1a):   mode1res=0x80000000 (0x80000000)
>> pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=59501002)
>> pcibios: BIOS_PRESENT call failed
>> AcpiOsDerivePciId: bus 0 dev 18 func 0
>> AcpiOsDerivePciId: bus 0 dev 17 func 0
>> acpi0: Power Button (fixed)
>> acpi0: wakeup code va 0xd5a40000 pa 0x9c000
>> AcpiOsDerivePciId: bus 0 dev 20 func 1
>> unknown: I/O range not supported
>> AcpiOsDerivePciId: bus 0 dev 0 func 0
>> AcpiOsDerivePciId: bus 0 dev 20 func 0
>> acpi0: reservation of 0, 1000 (3) failed
>> ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
>> acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0
>>
>>
>> Any suggestions?
>>
>> --
>> tut
>> DaRK VoIP GuRU
>> _______________________________________________
>> freebsd-acpi@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
>> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org"
>>     
>
>   




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46BC1418.9070008>