Date: Thu, 17 Feb 2005 08:14:49 -0600 From: Karl Denninger <karl@denninger.net> To: freebsd-stable@freebsd.org Subject: WRITE errors on SATA controllers Message-ID: <20050217081449.B26826@denninger.net>
next in thread | raw e-mail | index | archive | help
Hi;
Here's a new one...
FreeBSD-STABLE 5.3, here's the boot "DMESG" and the problem....
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #1: Wed Feb 2 22:57:48 CST 2005
karl@FS.denninger.net:/usr/obj/usr/src/sys/KSD-SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 267862016 (255 MB)
avail memory = 252456960 (240 MB)
ACPI APIC Table: <DELL PE400SC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE400SC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <SiI 3112 SATA150 controller> port 0xcef0-0xceff,0xcedc-0xcedf,0xcee8-0xceef,0xced8-0xcedb,0xcee0-0xcee7 mem 0xfe7dfe00-0xfe7dffff irq 21 at device 0.0 on pci2
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
rp0: <RocketPort PCI> port 0xcf00-0xcf3f irq 17 at device 2.0 on pci2
RocketPort0 (Version 3.02) 4 ports.
pcib3: <PCI-PCI bridge> at device 3.0 on pci2
pci3: <PCI bus> on pcib3
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xbf80-0xbf9f mem 0xfe400000-0xfe4fffff,0xf8001000-0xf8001fff irq 19 at device 4.0 on pci3
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:d0:b7:6f:ce:e8
fxp1: <Intel 82558 Pro/100 Ethernet> port 0xbfe0-0xbfff mem 0xfe500000-0xfe5fffff,0xf8000000-0xf8000fff irq 18 at device 5.0 on pci3
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:d0:b7:6f:ce:e9
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xcf40-0xcf7f mem 0xfe7e0000-0xfe7fffff irq 18 at device 12.0 on pci2
em0: Ethernet address: 00:0c:f1:c9:df:c5
em0: Speed:N/A Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
atapci2: <Intel ICH5 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 at device 31.2 on pci0
ata4: channel #0 on atapci2
ata5: channel #1 on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <ISA Option ROMs> at iomem 0xcc800-0xcffff,0xcb000-0xcc7ff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
RTC BIOS diagnostic error 18<memory_size,fixed_disk>
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
acd0: CDROM <Lite-On LTN486S 48x Max/YDS6> at ata1-master UDMA33
em0: Link is up 100 Mbps Full Duplex
ad8: 239372MB <Maxtor 6B250S0/BANC1980> [486344/16/63] at ata4-master SATA150
ad10: 238475MB <HDS722525VLSA80/V36OA63A> [484521/16/63] at ata5-master SATA150
GEOM_MIRROR: Device boot created (id=1131801609).
GEOM_MIRROR: Device boot: provider ad8s1 detected.
GEOM_MIRROR: Device boot: provider ad10s1 detected.
GEOM_MIRROR: Force device boot start due to timeout.
GEOM_MIRROR: Device boot: provider ad10s1 activated.
GEOM_MIRROR: Device boot: provider ad8s1 activated.
GEOM_MIRROR: Device boot: provider mirror/boot launched.
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/mirror/boota
em0: Link is up 100 Mbps Full Duplex
ad4: 238475MB <HDS722525VLSA80/V36OA63A> [484521/16/63] at ata2-master SATA150
GEOM_MIRROR: Component ad4s1 (device boot) broken, skipping.
GEOM_MIRROR: Cannot add disk ad4s1 to boot (error=22).
ad6: 239372MB <Maxtor 6B250S0/BANC1B70> [486344/16/63] at ata3-master SATA150
GEOM_MIRROR: Device boot: provider ad6s1 detected.
GEOM_MIRROR: Device boot: rebuilding provider ad6s1.
GEOM_MIRROR: Device boot: provider ad4s1 detected.
GEOM_MIRROR: Device boot: rebuilding provider ad4s1.
GEOM_MIRROR: Device boot: rebuilding provider ad6s1 finished.
GEOM_MIRROR: Device boot: provider ad6s1 activated.
GEOM_MIRROR: Device boot: rebuilding provider ad4s1 finished.
GEOM_MIRROR: Device boot: provider ad4s1 activated.
GEOM_MIRROR: Device boot: provider ad4s1 disconnected.
GEOM_MIRROR: Device boot: provider ad4s1 detected.
GEOM_MIRROR: Device boot: rebuilding provider ad4s1.
ad6: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=245216575
ad6: FAILURE - WRITE_DMA timed out
GEOM_MIRROR: Request failed (error=5). ad6s1[WRITE(offset=125550854144, length=16384)]
GEOM_MIRROR: Device boot: provider ad6s1 disconnected.
GEOM_MIRROR: Device boot: rebuilding provider ad4s1 finished.
GEOM_MIRROR: Device boot: provider ad4s1 activated.
GEOM_MIRROR: Device boot: provider ad6s1 detected.
GEOM_MIRROR: Device boot: rebuilding provider ad6s1.
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=27151007
ad4: FAILURE - WRITE_DMA timed out
GEOM_MIRROR: Request failed (error=5). ad4s1[WRITE(offset=13901283328, length=16384)]
GEOM_MIRROR: Device boot: provider ad4s1 disconnected.
GEOM_MIRROR: Device boot: provider ad4s1 detected.
GEOM_MIRROR: Device boot: rebuilding provider ad4s1.
The "WRITE_DMA" failure is occurring any time I have both channels on the
second SATA adapter running, and is random. It appears to be linked to
read/write activity, but not "mostly write" or "mostly read", as I can
reattach both disks to the mirror, and they will rebuild without drama -
but once they activate, then the problems begin anew.
This occurs on both an Adaptec and Bustek SATA adapters.
Ideas? Should I "send-pr" this one?
--
--
Karl Denninger (karl@denninger.net) Internet Consultant & Kids Rights Activist
http://www.denninger.net My home on the net - links to everything I do!
http://scubaforum.org Your UNCENSORED place to talk about DIVING!
http://www.spamcuda.net SPAM FREE mailboxes - FREE FOR A LIMITED TIME!
http://genesis3.blogspot.com Musings Of A Sentient Mind
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050217081449.B26826>