Date: Fri, 03 Sep 1999 02:49:47 -0500 From: Rob Snow <rsnow@lgc.com> To: Poul-Henning Kamp <phk@critter.freebsd.dk> Cc: freebsd-current@FreeBSD.ORG Subject: Re: spec_getpages error in current kernel from last night Message-ID: <37CF7D9B.2CADAD88@lgc.com> References: <5128.936343596@critter.freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
basil# uname -a
FreeBSD basil.dympna.com 4.0-CURRENT FreeBSD 4.0-CURRENT #0: Thu Sep 2
19:58:43 CDT 1999
rsnow@basil.dympna.com:/stripe/current/src/sys/compile/Basil-SMP-Current
i386
Last cvsup was 2:03 on Sept 2
dmesg output: (I've snipped out non-existent di's and left the stuff
from my mucking with density for my Exabyte 8505, several modes weren't
supported)
rsnow@basil% dmesg
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-CURRENT #0: Thu Sep 2 19:58:43 CDT 1999
rsnow@basil.dympna.com:/stripe/current/src/sys/compile/Basil-SMP-Current
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (686-class CPU)
Origin = "GenuineIntel" Id = 0x616 Stepping = 6
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 134217728 (131072K bytes)
<SNIPED OUT di's of non-existent devices>
avail memory = 127070208 (124092K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02f1000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f109c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> at device 7.1 on pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 16 at device 12.0 on
pci0
fxp0: Ethernet address 00:a0:c9:93:da:0c
ahc0: <Adaptec 2940 SCSI adapter> irq 17 at device 13.0 on pci0
ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs
vga-pci0: <Trident model 9660 VGA-compatible display device> irq 18 at
device 14.0 on pci0
ahc1: <Adaptec 2940 Ultra SCSI adapter> irq 19 at device 15.0 on pci0
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): <Maxtor 7850 AV>
wd0: 814MB (1667232 sectors), 1654 cyls, 16 heads, 63 S/T, 512 B/S
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <EXABYTE EXB-85058SQANXR1 0781> Removable Sequential Access SCSI-2
device
sa0: 5.000MB/s transfers (5.000MHz, offset 11)
da0 at ahc0 bus 0 target 3 lun 0
da0: <MICROP 3243-19 1128RA 28RA> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
Enabled
da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
da1 at ahc1 bus 0 target 6 lun 0
da1: <SEAGATE ST39173W 5764> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da2 at ahc1 bus 0 target 8 lun 0
da2: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da2: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
changing root device to wd0s2a
vinum: loaded
vinum: reading configuration from /dev/da2s1e
vinum: updating configuration from /dev/da1s1e
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
spec_getpages: I/O read failure: (error code=0) bp 0xc44a3158 vp
0xc9e071c0
size: 0, resid: 0, a_count: 803, valid: 0x0
nread: 0, reqpage: 0, pindex: 0, pcount: 1
vm_fault: pager read error, pid 921 (cvsup)
pid 921 (cvsup), uid 0: exited on signal 6 (core dumped)
Poul-Henning Kamp wrote:
>
> can we have:
>
> uname -a,
> time of last cvsup/ctm
> and
> dmesg output
>
> please ?
>
> In message <37CF743A.452D81EF@lgc.com>, Rob Snow writes:
> >Just got this message while in cvsup:
> >
> >Sep 3 02:01:09 basil /kernel: spec_getpages: I/O read failure: (error
> >code=0) bp 0xc44a3158 vp 0xc9e071c0
> >Sep 3 02:01:09 basil /kernel: size: 0, resid: 0, a_count: 803, valid:
> >0x0
> >Sep 3 02:01:09 basil /kernel: nread: 0, reqpage: 0, pindex: 0, pcount:
> >1
> >Sep 3 02:01:09 basil /kernel: vm_fault: pager read error, pid 921
> >(cvsup)
> >Sep 3 02:01:09 basil /kernel: pid 921 (cvsup), uid 0: exited on signal
> >6 (core dumped)
> >
> >I'm guessing this is _bad_?
> >
> >
> >To Unsubscribe: send mail to majordomo@FreeBSD.org
> >with "unsubscribe freebsd-current" in the body of the message
> >
>
> --
> Poul-Henning Kamp FreeBSD coreteam member
> phk@FreeBSD.ORG "Real hackers run -current on their laptop."
> FreeBSD -- It will take a long time before progress goes too far!
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37CF7D9B.2CADAD88>